Sigma-II Series SGM*H/SGDH USER'S MANUAL - Esco Drives ...

11.3 List of ParametersParameterNo.Name Setting Range Unit FactorySettingSettingValidationPn207 Position Control Function Switches − − 0000 AfterrestartReferenceSection−4thdigit3rddigit2nddigit1stdigitn.Position Reference Filter Selection(Refer to "8.6.4 Smoothing.")01Acceleration/deceleration filterAverage movement filterPosition Control Option(Refer to "9.4.3 Speed Feed-forward.")0 N/A1 Uses V-REF as a speed feed-forward input.Reserved (Do not change)Pn208Reserved (Do not change)Position Reference Movement AveragingTimePn300 Speed Reference Input Gain 1.50 to 30.00 V/ rated speed0.00 to 64.00 ms 0.01 ms 0.00 ms Afterrestart11-350.01V/ ratedspeed6.00 V/ ratedspeedImmediatelyPn301 Speed 1 0 to 10000 min -1 1 min -1 100 min -1 ImmediatelyPn302 Speed 2 0 to 10000 min -1 1 min -1 200 min -1 ImmediatelyPn303 Speed 3 0 to 10000 min -1 1 min -1 300 min -1 ImmediatelyPn304 JOG Speed 0 to 10000 min -1 1 min -1 500 min -1 ImmediatelyPn305 Soft Start Acceleration Time 0 to 10000 ms 1 ms 0 ms ImmediatelyPn306 Soft Start Deceleration Time 0 to 10000 ms 1 ms 0 ms ImmediatelyPn307 Speed Reference Filter Time Constant 0.00 to 655.35 ms 0.01 ms 0.40 ms ImmediatelyPn308 Speed Feedback Filter Time Constant 0.00 to 655.35 ms 0.01 ms 0.00 ms ImmediatelyPn400 Torque Reference Input Gain 1.0 to10.0 V/rated torque0.1 V/ratedtorque3.0 V/ratedtorqueImmediatelyPn401 Torque Reference Filter Time Constant 0.00 to 655.35 ms 0.01 ms 1.00 ms ImmediatelyPn402 Forward Torque Limit 0 to 800% 1% 800% ImmediatelyPn403 Reverse Torque Limit 0 to 800% 1% 800% ImmediatelyPn404 Forward External Torque Limit 0 to 800% 1% 100% ImmediatelyPn405 Reverse External Torque Limit 0 to 800% 1% 100% Immediately8.6.48.5.18.7.49.4.38.8.18.8.18.8.18.1.18.5.48.5.48.5.59.4.78.7.18.9.38.9.49.4.29.4.108.9.18.9.18.9.28.9.48.9.28.9.411