Sigma-II Series SGM*H/SGDH USER'S MANUAL - Esco Drives ...

7.3 Operation in Parameter Setting Mode (Pn)7.3 Operation in Parameter Setting Mode (Pn)Functions can be selected or adjusted by setting parameters. There are two types of parameters. One type requiresvalue setting and the other requires function selection. These two types use different setting methods.With value setting, a parameter is set to a value within the specified range of the parameter. With function selection,the functions allocated to each digit of the seven-segment LED panel indicator (five digits) can be selected.7.3.1 Setting Parameters(1) Value Setting Parameters(a) Types of Value Setting ParametersRefer to 11.3.2 List of Parameters.(b) Example of Changing Value Setting ParameterThe parameter settings can be used for changing parameter data. Before changing the data, check the permittedrange of the parameter.EXAMPLE The example below shows how to change parameter Pn100 (speed loop gain) from “40” to “100.”StepDisplay afterOperationDigital Operator Panel Operator Description1DSPLPress the DSPL/SET or MODE/SET Key to select theSETparameter setting mode. If a parameter other than(DSPL/SET Key)Pn100 is displayed, press the UP or DOWN Key toMODE/SET(MODE/SET Key) select Pn100.Note: The enabled digit blinks.2 Press the DATA/ENTER Key once, or DATA/SHIFTDATAKey for more than one second. The current data ofENTERPn100 is displayed.(DATA/ENTER Key)DATA(DATA/SHIFT Key)(Press at least 1 s.)3 Press the LEFT or RIGHT Key or DATA/SHIFT Key toselect the digit to be set.DATA/(DATA/SHIFT Key)4 Press the UP or DOWN Key to change the data.Keep pressing UP or DOWN Key until “00100” is displayed.5 Press the DATA/ENTER Key once, or DATA/SHIFTDATAKey for more than one second. The value blinks and isENTERsaved.(DATA/ENTER Key)DATA(DATA/SHIFT Key)(Press at least 1 s.)6 Press the DATA/ENTER Key once, or DATA/SHIFTDATAKey for more than one second to return to the display ofENTERDATAPn100. The data for the speed loop gain (Pn100) is(DATA/ENTER Key) (DATA/SHIFT Key)(Press at least 1 s.)changed from “40” to “100.”77-19