Sigma-II Series SGM*H/SGDH USER'S MANUAL - Esco Drives ...

PURODUCT SERVICE1 Outline1.1.1 Check Items1.1 Checking ProductsThe following procedure is used to check the AC servodrives of Σ-ΙΙ Series products on delivery.1.1.1 Check ItemsCheck the following items when Σ-ΙΙ Series products are delivered.Check ItemsAre the delivered products the onesthat were ordered?Does the servomotor shaft rotatesmoothly?Is there any damage?CommentsCheck the model numbers marked on the nameplates on the servomotorand SERVOPACK. (Refer to the descriptions of model numbersin the following section.)The servomotor shaft is normal if it can be turned smoothly by hand.Servomotors with brakes, however, cannot be turned manually.Check the overall appearance, and check for damage or scratches thatmay have occurred during shipping.If any of the above items are faulty or incorrect, contact your Yaskawa representative or the dealer from whomyou purchased the products.1.1.2 Servomotors•SGMAH and SGMPHNameplateServomotor modelRatingsOrder numberSerial numberAC SERVO MOTORSGMAH-02AAA21W V A200 200 2.1N min-1Ins.0.637 3000 BO/N 9271316-1S/N DD 9964567890012YASKAWA ELECTRIC CORPORATION JAPAN•SGMGH / SGMSH / SGMDHServomotor modelRatingsOrder numberSerial numberAC SERVO MOTORTYPE SGMSH-10ACA211000 W 3.18 N m 3000 min -15.7 A 200 V CONT ins FO/N 9W0774 002A -039S/N BB2 753000039 DATA 0002 ManufacturingYASKAWA ELECTRIC MADE IN JAPAN dateBauart..gepruft•SGMCSServomotor modelRatingsOrder numberSerial numberNameplateAC SERVO MOTORSGMCS-04C3A11W V A84 200 2.1N min-1Ins.4.0 200 AO/N 9271316-1S/N DD 9964567890012YASKAWA ELECTRIC CORPORATION JAPAN1-2