Sigma-II Series SGM*H/SGDH USER'S MANUAL - Esco Drives ...

3 Specifications and Dimensional DrawingsSymbolSpecificationsUnits: mm (in)ModelSGMSH- SGMGH- SGMDH-10 15 20 30 40 50 03B 06B 09B 12B 20B 30B 40B 55B − 1E 22 32 4005A 09A 13A 20A 30A 44A 55A 75A 1AA113LR 45 (1.77) 63 (2.48) 58 (2.28) 79 (3.11)(4.45)116 (4.57) 55 (2.17) 65 (2.56)Q 40 (1.57) 55 (2.17) 40 (1.57) 76 (2.99) 110 (4.33) 50 (1.97) 60 (2.36)QK 32 (1.26) 50 (1.97) 25 (0.98) 60 (2.36) 90 (3.54) 45 (1.77) 50 (1.97)6Straight,with keyand tapS024–0.013⎛ 0⎝0.94 ⎞–0.0005⎠028–0.013⎛ 0⎝1.10 ⎞–0.0005⎠019–0.013⎛ 0⎝0.75 ⎞–0.0005⎠022–0.013⎛ 0⎝0.87 ⎞–0.0005⎠W 8 (0.31) 5 (0.20) 6 (0.24) 10 (0.39) 12 (0.47) 16 (0.63) 8 (0.31) 10 (0.39)T 7 (0.28) 5 (0.20) 6 (0.24) 8 (0.31) 10 (0.39) 7 (0.28) 8 (0.31)U 4 (0.16) 3 (0.12) 3.5 (0.14) 5 (0.20) 6 (0.24) 4 (0.16) 5 (0.20)P M8 screws, depth: 16 M5 screws, depth: 12+35 – 0.010⎛ +1.38 – 0.0004 ⎞⎝ 0 ⎠M12 screws,depth: 12042–0.016⎛ 0⎝1.65 ⎞–0.0006⎠M16 screws,depth: 32+55 – 0.030+ – 0.011⎛+2.17 – 0.0012 ⎞⎝+ – 0.0004⎠M20screws,depth: 40* 1. If the SGMGH-05A and 09A are not specified as the mounting interchangeable type, the value of theQK will be 16.* 2. If the SGMGH-05A and 09A are not specified as the mounting interchangeable type, the value of theT will be 2.* 3. If the SGMGH-05A and 09A are not specified as the mounting interchangeable type, the value of theU will be 4.5.028–0.013⎛ 0⎝1.10 ⎞–0.0005⎠M8screws,depth: 16032–0.016⎛ 0⎝1.26 ⎞–0.0006⎠M12screws,depth: 253-158