Landscape Lighting - Alta Falls & Pond Supplies

Quick Reference Guide ........................... 1Lighting Techniques. .............................9Product selection guide. .......................... 11Finishes & Materials ..............................13LED LIGHTINGLED Technology ................................17Low Voltage SystemsAccentBullytes.....................................25Floodlytes. ..................................33Wall Washers ...............................34Downlytes ..................................36IngroundIngrounds. ...................................41Inground Installation. .........................45Step & DeckDecklytes ...................................49Steplytes. ...................................55Steplyte Installation. ..........................63WalkwayPathlytes. ...................................67Beacons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85UnderwaterUnderwater. ................................89Underwater Accessories & Application ..........91SpecialtyRocklytes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Decorative. .................................95Patiolyte ....................................96Accessories ...................................99Photometric Data. ............................ 103Idea Guide/Gallery. ............................ 105Line Voltage SystemsAccentBullytes..................................... 111Remote Ballasts. ............................. 121FloodlytesFloodlytes. ..................................125Floodlytes Accessories. ...................... 137IngroundIngrounds. .................................. 141Inground Installation. ......................... 151SteplytesSteplytes. .................................. 155Steplyte Installation. ..........................17 1WalkwayPathlytes. .................................. 175Bollards. ....................................18 1Beacons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189UnderwaterUnderwater. ............................... 199Underwater Accessories. ....................200Underwater Applications ....................201Accessories ..................................205Custom and Modification ......................207Photometric Data. ............................209Photo Credits. ................................ 210Index .........................................21 14

Philips Hadco’s Low Voltage Lighting System offers the greatestversatility with up to 1,000 fixture combinations for every landscapelighting application. High performance halogen lamps, available in manystyles, produce greater lumen output and last longer than conventionalincandescent lamping. Philips Hadco Low Voltage transformersinclude a multiple-tap voltage setting that allows for easy adjustmentof load and distance variations. Fixture housings are constructed ofthe most durable materials that include die-cast aluminum, composite,stainless steel, copper, cast bronze and die-cast brass. All paintedfinishes are applied through a special five-stage powdercoat processto retain their beautiful appearance for many years.1

low voltage Quick ReferEnceEL1Pg. 25BL711/BL756Pg. 25, 26BL616Pg. 26BL5016Pg. 27BUL16/BL16Pg. 27, 28CUL16Pg. 28GABL16Pg. 29BL36/BPL36Pg. 29, 30BL1-LongPg. 30BL1-ShortPg. 31BUL1-LongPg. 31BUL1-ShortPg. 32BL1-Long BrassPg. 32WAML14/WBML14Pg. 33CAL1Pg. 34AAL1Pg. 34AUL1Pg. 35GAWL 1Pg. 35GAHL1Pg. 36DL1Pg. 36DRL1Pg. 37DSL2Pg. 37DRL2Pg. 37EWL1Pg. 38LLLPg. 38 & 56IL136Pg. 41IL116Pg. 41IUL516Pg. 43IL336Pg. 43GADL1Pg. 49GADL2Pg. 49CUL20Pg. 49DUL1/DCL1/DAL1Pg. 50SRL4Pg. 51SRL3Pg. 51DSL1Pg. 51GACL1Pg. 52GACL2Pg. 52RL13Pg. 52DL4Pg. 53DL5Pg. 53GADL4Pg. 53GADL51Pg. 54GADL52Pg. 54GADL61Pg. 54GADL62Pg. 54RFL1Pg. 55RLL1Pg. 55RLL2Pg. 55RRCBL1Pg. 56RRBL1Pg. 57RRCL1Pg. 57RRFL1Pg. 57CB100Pg. 59RSBL2Pg. 59RSFL2Pg. 59RSCL2Pg. 61RSVL2Pg. 61CUL2 CUL3Pg. 67 Pg. 67CUL4Pg. 67CUL6Pg. 68CUL7Pg. 68CUL9Pg. 68CUL10Pg. 69GAL3Pg. 69GAL3-SSPg. 692

low voltage Quick ReferEnceGAML1Pg. 70GAML2Pg. 70GAML3Pg. 70GAML4Pg. 71GAML5Pg. 71GASL1Pg. 72GASL4Pg. 72GASL5Pg. 72GAGL1Pg. 73GATL1Pg. 73EPL1Pg. 73EL2Pg. 74SPL4Pg. 74SPL5Pg. 74MUL4Pg. 75MUL5Pg. 75, 76AL4/AL41Pg. 76TRL4Pg. 77TRL5Pg. 77MSL12Pg. 77MSL18Pg. 78CPL12Pg. 78CPL21Pg. 78SPL1Pg. 79SPL18Pg. 79TUL1Pg. 80TUL3Pg. 81FUL1Pg. 813

TL19Pg. 82TL39Pg. 82AL42Pg. 83AL43Pg. 83RL4Pg. 84RL3Pg. 84PL3Pg. 85PL39Pg. 85DWL1/DWCL1Pg. 86DWCL2Pg. 86UWL1Pg. 89UWUL516Pg. 89UWL1075/UWL1100Pg. 90UWL2075/UWL2100Pg. 90BLN5D4Pg. 19ML4D3Pg. 21AL4D3Pg. 21TRL4Pg. 19ILW5D4Pg. 20UWL5D4Pg. 21RL116Pg. 95RL336Pg. 95GASUNPg. 95LL20Pg. 96LL48Pg. 964

lINE voltage Quick ReferEnceFor projects requiring optimal performance, Philips Hadco’s linevoltage outdoor fixtures provide exceptional photometric qualityand lamping flexibility. The line voltage system is designed to operateutilizing lamping options such as incandescent, fluorescent or HIDfor covering a wide range of applications. Line voltage systems areideal for large-scale landscape or commercial projects, with fixturesmade of durable composite, or die-cast aluminum, brass or stainlesssteel, ideal for public settings. And with a variety of photometricchoices, plus optional accessories such as concrete pour kits, lenses,louvers, barn doors, mounting stanchions, and more, Philips Hadcofixtures easily conform to the architect’s vision.5

EW1Pg. 111BT711Pg. 111BT5016Pg. 111BT1-LongPg. 112BT1-ShortPg. 112B1Pg. 113BU1Pg. 114B3Pg. 114BU3Pg. 1151020Pg. 115B4/BU4Pg. 116-120WAMT14Pg. 125WBMT14Pg. 125WAM1Pg. 126WBM1Pg. 126WAF1/WAF13Pg. 127WA1Pg. 127WA2Pg. 128, 129WA3Pg. 131, 133, 135WB3Pg. 131, 133, 135I2Pg. 141I2.5Pg. 20 & 143I3Pg. 145I4Pg. 147I5Pg. 149RSB2Pg. 22 & 155RSF2Pg. 22 & 155RSS2Pg. 22 & 155RSC2Pg. 22 & 157RSV2Pg. 22 & 157CB100Pg. 159RSB3Pg. 161RSC3Pg. 1611-7/16"[37mm]EWB4Pg. 1633-15/16"[100mm]3-3/16"[81mm]2"[51mm]3-9/16"[90mm]EWR4Pg. 1652-5/8"[67mm]2"[51mm]3-9/16"[90mm]5-21/32"[144mm]2"[51mm]3-9/16" 7/8"[23mm] [90mm]11/16"3-3/16"11/16" 7/8" 3-3/16"[18mm][81mm][18mm][81mm]2-5/8"5-13/32" RRB1[22mm]2-5/8" RRC1[67mm][67mm][137mm] Pg. 167 Pg. 16711/16"[18mm]7/8"[23mm]RRF1Pg. 16713/16" 7/8"[20mm] [23mm]RRB3Pg. 16913/16"[20mm]13/16"[20mm]29/32"[23mm]2-1/4"1-7/16"[37mm]5-13/16"29/32"[148mm] [28mm] 5-13/1[23mm][148mRRC3Pg. 169 1-1/8"7-7/8"[200mm]29/32"[23mm]6

FOUNTAIN LightingUnderwater illumination amplifiesthe dramatic effect of fountains,adding visual warmth and interestto parks, town squares andshopping centers. To use thewater as a mirror, light the areabehind the reflecting surface.Also, add colored lenses fordramatic effect.POND LightingUnlock the natural beauty ofa pond or water garden aftersundown by highlighting withunderwater fixtures. In additionto extending the charm of thefeature after dark, pondlighting gives you the optionof using color lenses fordifferent atmospheric effects.GrazingAn ideal approach to bring outthe textured beauty of stoneor brick retaining walls, privacyfences, chimneys, and otherinteresting masonry. Achievedby positioning a luminaire withinsix to eight inches of a façadeand aiming it 90° vertically.DOWNLightingThe common technique of mountinglights high in trees to broadcastover a wide area. This type ofinstallation creates general ambientlight for backyard entertaining …and also illuminates for safetyand security. Downlighting fixturescan also be installed under eavesof a structure to highlightarchitectural detail.Step LightingUsing light to accent steps paysdividends in beauty and safety,allowing visitors to navigate withease. Fixtures can be recessedinto step risers, underneathrailings, and as surface lights onvertical posts.DECK LightingAnother way to enhance safetyand accent design. Spotlightchanges in elevation, deck edges,and drop-offs. Fixtures can beconcealed beneath benches,underneath railings, and as surfacelights on vertical posts.Security LightingEliminating dark areas whereintruders can hide is an effectivecrime deterrent. Security lightingcan be created without harshglare by installing low-level lightingor accent lighting in and aroundthe landscape of a home orbusiness. The right combinationwill improve both appearanceand security.10

The toolsIn your mind’s eye, you’ve already captured the powerand beauty of light. You can rely on Philips Hadco for thebroad range of tools you’ll need to project that vision.SILHOUETtingLighting the wall behindthis tree accentuates itsinteresting shape andbranch structure.Qu i c k Tips• An ice blue lens enhances the colors of evergreen foliageand also “cools off” a halogen lamp like the MR16, givingit the appearance of moonlight.• When installing low voltage spread lights in a bed ofannual flowers, use the S6 adjustable stake so the fixturecan be raised as the flowers grow.SECURITYLIGHTINGLight on all wallsof the homeserves to minimizehiding places forunwelcome visitors.• To help conceal the light source, use a cutoff louversuch as the ML1 for the BL616 or the ICG16 for the IL116.• To reduce glare, adjust the shroud on bullytes.• To avoid poisoning trees, use only stainless steel orcadmium-plated steel fasteners when mounting fixtures.• When attaching low voltage cable to a tree, use a wiretie with a grommet end. This allows the cable to flexslightly off the tree, preventing damage to both.UPLIGHTIngAn ideal place toapply uplighting …shining skywardtoward an area ofarchitectural interest.11

finishes and materialsT h e Pr o p e rF it a n d FinishSome lighting fixtures should be statements unto themselves;others should blend into the environment they serve. A fixturethat improperly stands out from its surroundings will distractfrom the artistry of the application. That’s why choosing the rightmaterial and finish is just as important as choosing the right lamp.To maximize your choices, Philips Hadco offers an assortment ofmaterials in a spectrum of finishes, each painstakingly developedto harmonize and endure in naturally occurring environments.N = Natural BrassOB = Oiled BrassBrassOur new ULTEM ® High-Performance Polymer is a brand newcomposite material that resists chipping, flaking and fading.Perfect for harsh environments, these composite fixturesare available in Black, Bronze and Verde … ready to blendinto common varieties of soil, mulch or vegetation.Our die cast aluminum fixtures feature thermoset powdercoatfinishes for lasting beauty and durability. In addition to Black,Bronze, Verde and White, other finishes are available for a varietyof applications. Garden Green blends into darker vegetation,Sienna matches landscape stone, and Speckled Stone takesits cues from the color palette of the desert. As for Old Marbleand Silver – each makes its own statement of style.G = VerdeH = BronzeCompositeDesigned to resemble concrete, our Limestone and Sand Stonefinishes are developed with actual aggregate, which is bondedto cast aluminum and sanded for unmatched beauty and durability.A = BlackOur spun copper fixtures and cast brass fixtures are natural and willpatina over time; or you can choose them pre-aged with oxidizedfinishes like Antique Copper, Verde Copper or Oiled Brass. And fora natural finish that never loses its shine, we offer Stainless Steel.CopperDon’t see your finish here? Don’t worry. We have hundreds morestandard colors … plus color matching. Contact your Philips Hadcorepresentative for more details.ULTEM ® is a registered trademark of General Electric Company.VC = Verde CopperCopperAC = Antique Copper13

SS = Stainless SteelSteelA = BlackB = WhiteG = VerdeN = Natural Brass(Brass)G = Verde(Aluminum)H = BronzeK = Garden GreenAluminumL = LimestoneH = Bronze(Composite)OM = Old Marble(Aluminum)OM = Old MarbleS = Sand StoneT = Speckled StoneX = SilverU = Sienna14

LED L ighting

What is an LED?Simply put, an LED, or Light Emitting Diode, is a diode that is chip-mountedin a reflector cup and held in place by a milled steel frame connectedto a pair of electrical wires. When current flows across the junctionof the two different materials, light is produced from within the solid crystalchip. Philips Hadco uses bright white LEDs as standard, which are developedby coating a blue LED with a phosphor, and thereby generating a white color.

LED TechnologyLED: Philips Ha d c o ’ sL e a d i n g Ed g e De v e l o p m e n tWhy use LED?• LEDs provide a longevity that is up to 20 times that ofstandard incandescent lamps, translating to low maintenance.• LEDs are solid-state devices, meaning no moving parts,glass or filaments to break.• LEDs are small in size and resistant to vibration or shock.• LEDs contain no mercury and are environmentally friendly.• LEDs are more efficient, using up to 90% less energythan other light sources based on watts.i2.5(page 20)BN4BM4BW4(page 18)BL7D1FBL7D1W(page 18)BULN1D4BULW1D4(page 19)ML4D3ML4DW3(page 21)ILN5D4ILW5D4ILN5DW4ILW5DW4(page 20)ULW5D4ULW5DW4(page 21)BLN5D4BLW5D4BLN5DW4BLW5DW4(page 18)TRL4D3TRL4DW3(page 19)AL4D3AL4DW3(page 21)Steplytes(page 22)17

FOR THE MOST UP TO DATE INFORMATION ON LED VISIT www.hadcoled.comB4 LED BULLYTE• 1 20 Volt• 1 7 total watts consumed• Twelve (1 2) Seoul semiconductor• Integral voltage regulator, suitable for standardremote transformers• 1 /2” NPS fitterHousing – Die-cast aluminum with fully-adjustableswivel arm with vibration-proof locking teeth.Finish – Black, hand-rubbed verde antiqued over blackthermoset powdercoat, or bronze thermoset powdercoat.Lens – Clear flat tempered glass included with shroud.LED – Factory sealed Seoul semiconductorZ-power P4 LED’s. cool white - 100 lumens typical, warmwhite - 60 lumens typicalELECTRICAL – 1 7 watts consumed (total fixture consumption).SmartSelect electronic driver 1 20-277 Vac 50-60hzauto sensing. Integral over-voltage, over-current and short circuitprotection (auto-recovery).OPTICS – Narrow (1 0°), Medium (30°)or Wide (50°) optics.IP RATING – IP66 Dust tight and sealed against direct jetsof water.ETL and cETL listed.CatalogNumberOptics(N) Narrow(M) Medium(W) WideSize(4)LED Color/Lumens *CD59 (Cool LED 589 lumens)WD41 (warm LED 404 lumens)*CD57 (Cool LED 569 lumens)WD40 (warm LED 400 lumens)CD53 (Cool LED 525 lumens)WD34 (warm LED 342 lumens)Finish(A) Black(V) Verde(H) BronzeShroud(L) LongB (N) (4) (CD59, WD41) ( ) (L)B (M) (4) (CD57, WD40) ( ) (L)B (W) (4) (CD53, WD34) ( ) (L)BL7D1 LED BULLYTE• 1 2 Volt • 1 total watt• One (1 ) Luxeon ® K2 - 75 lumens• 1 /2” NPS fitterHousing – Die-cast aluminum with fully-adjustableswivel arm, with vibration-proof locking teeth.Shroud – Fully-rotatable, gasketed, cast aluminum.Finish – Black, hand-rubbed verde antiqued overblack thermoset powdercoat, or bronze thermosetpowdercoat.Lens – Frosted - 5,000K or Amber - 3,000K.LED – Luxeon ® K2 High Output LED, powered350mA DC to operate for 50,000 hours.ELECTRICAL – Input voltage range (VAC):10.8-17.5, regulated to 12V DC. Integral surge protector.(Magnetic low voltage transformer required)WIRING – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.Catalog NumberLens(F) Frosted Lens(W) Amber LensFinish(A) Black(G) Verde(H) BronzeBL7D1 ( ) ( )4-3/8"[111mm]16-1/2"[419mm]6-1/4"[159mm]3-7/8"[98mm]2"[51mm]2-5/16"[59mm]18

LEDFOR THE MOST UP TO DATE INFORMATION ON LED VISIT www.hadcoled.comBLN5D(W)*4/BLW5D(W)*4LED BULLYTEBLN5D4-A Black(Narrow)BLW5D4-A Black(Flood)BLN5D4-H Bronze(Narrow)BLW5D4-H Bronze(Flood)• 12 Volt • 12.4 total watts• Four (4) Luxeon ® K2 High Output LEDs• Integral voltage regulator, suitable for standardremote transformers• 1/2” NPS fitterHOUSING – Die-cast marine grade alloyaluminum with fully adjustable swivel arm withvibration-proof locking teeth.SHROUD – Fully rotatable, double gasketed,die-cast marine grade alloy aluminum.FINISH – Black or bronze thermosetpowdercoat.LENS – Clear tempered glass (5000k), Amber Lens(3000k), affixed at 10° angle for natural cleaning.LED – Luxeon ® K2 High Output LED, powered700mA DC to operate for 50,000 hours.ELECTRICAL – Input voltage range (VAC):10.8-17.5, regulated to 12V DC. Integral surgeprotector.(Magnetic low voltage transformer required)OPTICS – Integral Flood (25°) or Spot (12°) optics.WIRING – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.IP RATING – IP66Dust tight and sealed againstdirect jets of water.5-13/16"[147mm]*(W) warm option2-3/8"[60mm]2-13/16"[71mm]BULN1D4/BULW1D4LED BULLYTE• 12 Volts• 12.4 total watts• Four (4) Luxeon ® K2 High Output LEDs• Integral voltage regulator, suitable for standardremote transformers• 1/2” NPS fitter• ETL and cETL listed.Housing – One-piece injection moldedUltem ® High Performance Polymer with fullyadjustableswivel arm with vibration-proof lockingteeth.Finish – Color impregnated material in black,hand-rubbed verde antiqued over black, or bronze.LENS – Frosted tempered glass.LED – Luxeon ® K2 High Output LED, powered700mA DC to operate for 50,000 hours.ELECTRICAL – Input voltage range (VAC):10.8-17.5, regulated to 12V DC. Integral surgeprotector.(Magnetic low voltage transformer required)WIRING – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.CatalogNumberLens(W) AmberLens( - ) Clear LensShroud(L) LongShroudFinish(A) Black(G) Verde(H) BronzeBULN1D4 ( ) L ( )BULW1D4 ( ) L ( )2-3/8"[60mm]6-1/2"[165mm]3-1/8"[80mm]TRL4D(W)*3LED PATHLIGHTTRL4D3-A Black TRL4D3-G Verde TRL4D3-H BronzeTRL4DW3-A Black TRL4DW3-G Verde TRL4DW3-H Bronze• 12 Volt • 6.5 total watts• Philips Lumiled Rebel,warm white (3000K), cool white (6000K).• Integral Voltage Regulator, suitable for standardremote transformers• 1/2” NPS fitterHOUSING – Cast aluminum with stainless steel fasteners.FINISH – Black or bronze thermoset powdercoat,verde hand-rubbed over black powdercoat.LENS – Frosted tempered glass sprinkler shieldwith molded silicone gaskets.LED – Philips Lumileds Rebel LEDs deliver70% lumen maintenance at 50,000 hours.ELECTRICAL – Input voltage range (VAC):10.8-17.5, regulated to 12V DC. Integral surge protector.(Magnetic low voltage transformer required)WIRING – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.IP RATING – IP66 Dust tight and sealedagainst direct jets of water.Recommended Spacing - TRL4D3-8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 6.5w LED 5.0 1.0 0.5 0.2 0.1 0.05 0.01 0.0 0.0*(W) warm option23-7/16"[597mm]8-5/16"[211mm]19

FOR THE MOST UP TO DATE INFORMATION ON LED VISIT www.hadcoled.comi2.5LED INGROUNDI25- SS Stainless Steel I25-N Bronze• 1 20 Volt• 1 7 total watts consumed• Twelve (1 2) Seoul semiconductor• 1 /2” NPS fitterHOUSING – Single-piece compression molded,fiberglass reinforced polyester composite housing. Separate sealedcompartments. Potted factory seal with anti-wicking wiring.Hinged lens ring with captive lens and fasteners. Only 2 fastenersrequired to secure lens ring. UL Listed silicone-filled wire nutsprovided–no encapsulant or conduit seal required.LENS – Clear convex, tempered borosilicatefor high-impact resistance. 3,000 lb live-load rated, drive-over.LED – Factory sealed Seoul semiconductorZ-power P4 LED’s. cool white - 100 lumens typical,warm white - 60 lumens typicalELECTRICAL – 1 7 watts consumed (total fixture consumption).SmartSelect electronic driver 1 20-277 Vac 50-60hzauto sensing. Itegral over-voltage, over-current and shortcircuit protection (auto-recovery).AIMING – 15° either side of vertical and full 360° rotation. Angledegree marks for precise vertical aiming with tool-less LOC-AIM ® .IP RATING – IP66/68 to 1 M.INTERNAL ACCESSORY – * LEDADP (part number)LED Accessory Adaptor Ring * Must order this adaptor ringif you order an internal accessory (see page 143).CatalogNumberFinish(N) Natural CastBronze(SS) StainlessSteelOptics(SP) Spot(NF) NarrowFlood(FL) FloodLED Color/Lumens *(WL41) Warm White, 404 Lumens(CL59) Cool White, 589 Lumens(WL40) Warm White, 400 Lumens(CL57) Cool White, 569 Lumens(WL34) Warm White, 342 Lumens(CL53) Cool White, 525 LumensI25 ( ) SP (WL41,CL59)I25 ( ) NF (WL40,CL57)I25 ( ) FL (WL34,CL53)ILN5D(W)*4/ILW5D(W)*4LED iNGROUNDILN5D4-H Bronze(Narrow)4-3/8"[111mm]4-1/8"[105mm]ILW5D4-H Bronze(Flood)• 12 Volt• 12.4 total watts• Four (4) Luxeon ® K2 High Output LEDs• Integral voltage regulator, suitable for standardremote transformersHOUSING – Single-piece injection molded fiberglassreinforced ULTEM ® High Performance Polymer.LENS RING – Single-piece injection molded ULTEM ®High Performance Polymer with gasketed lens.Twist-off for easy access.FINISH – Color impregnated bronze.LENS – Convex lens is clear (5000k), Amber Lens(3000k), high temperature tempered glass furnishedwith silicone O-ring for watertight seal.LED – Luxeon ® K2 High Output LED,powered 700mA DC to operate for 50,000 hours.ELECTRICAL – Input voltage range (VAC):10.8-17.5, regulated to 12V DC. Integral surge protector.(Magnetic low voltage transformer required)OPTICS – Integral Flood (25°) or Spot (1 2°) optics.WIRING – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.IP RATING – IP66/68 to 1 M .4-1/8"[105mm]*(W) when ordering optional Amber Lens20

LEDFOR THE MOST UP TO DATE INFORMATION ON LED VISIT www.hadcoled.comML4D(W)*3 LED PATHLIGHTML4D3-A Black ML4D3-G Verde ML4D3-H BronzeML4DW3-A Black ML4DW3-G Verde ML4DW3-H Bronze• 12 Volt • 6.5 total watts• Philips Lumiled Rebel,warm white (3000K), cool white (6000K).• Integral Voltage Regulator, suitable for standardremote transformers• 1/2” NPS fitterHOUSING – Cast aluminum with stainlesssteel fasteners.FINISH – Black or bronze thermosetpowdercoat, verde hand-rubbed over blackpowdercoat.LENS – Frosted tempered glass sprinklershield with molded silicone gaskets.LED – Philips Lumileds Rebel LEDs deliver70% lumen maintenance at 50,000 hours.ELECTRICAL – Input voltage range (VAC):10.8-17.5, regulated to 12V DC.Integral surge protector.(Magnetic low voltage transformer required)WIRING – Pre-wired with a 3-ft. pigtail and aquick connector for easy hookup to the supply cable.IP RATING – IP66 Dust tight and sealedagainst direct jets of water.Recommended Spacing - ML4D3-8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 6.5w LED 5.0 1.0 0.5 0.2 0.1 0.05 0.01 0.0 0.05-1/16"[129mm]AL4D(W)*3 LED PATHLIGHTAL4D3-A Black AL4D3-G Verde AL4D3-H BronzeAL4DW3-A Black AL4DW3-G Verde AL4DW3-H Bronze• 12 Volt • 6.5 total watts• Philips Lumiled Rebel,warm white (3000K), cool white (6000K).• Integral Voltage Regulator, suitable for standardremote transformers• 1/2” NPS fitterHOUSING – Cast aluminum with stainlesssteel fasteners.FINISH – Black or bronze thermosetpowdercoat, verde hand-rubbed over blackpowdercoat.LENS – Frosted tempered glass sprinklershield with molded silicone gaskets.LED – Philips Lumileds Rebel LEDs deliver70% lumen maintenance at 50,000 hours.ELECTRICAL – Input voltage range (VAC):10.8-17.5, regulated to 12V DC.Integral surge protector.(Magnetic low voltage transformer required)WIRING – Pre-wired with a 3-ft. pigtail and aquick connector for easy hookup to the supply cable.IP RATING – IP66 Dust tight and sealedagainst direct jets of water.Recommended Spacing - AL4D3-8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 6.5w LED 1.8 1.0 0.5 0.2 0.1 0.05 0.01 0.0 0.07-1/4"[183mm]ULW5D(W * )4LED UNDERWATERULW5D4-H Bronze• 12 Volt• 12.4 total watts• Four (4) Luxeon ® K2High Output LEDs• Integral voltage regulator, suitable for standardremote transformersHOUSING – Single-piece injection moldedfiberglass reinforced ULTEM ® High PerformancePolymer.LENS RING – Single-piece injection moldedULTEM ® High Performance Polymer withgasketed lens with polycarbonate lens protector.FINISH – Color impregnated bronze.LENS – Clear tempered glass (5000k),Amber Lens (3000k), Convex lens is clear,high temperature tempered glass furnishedwith silicone O-ring for watertight seal.LED – Luxeon ® K2 High Output LED,powered 700mA DC to operate for 50,000 hours.ELECTRICAL – Input voltage range (VAC):1 0.8-1 7.5, regulated to 1 2V DC.Integral surge protector.(Magnetic low voltage transformer required)WIRING – Pre-wired with a 10-ft. STWA cordfor hardwiring to the low voltage supply cable.IP RATING – IP66/68 to 1 M.4-1/16"[103mm]6-11/16"[170mm]*(W) warm option19-1/2"[495mm]*(W) warm option20-3/8"[518mm]5-1/8"[130mm]21*(W) when ordering optional Amber Lens

FOR THE MOST UP TO DATE INFORMATION ON LED VISIT www.hadcoled.comRSC2AluminumRSF2PolycarbonateRSS2PolycarbonateRSV2AluminumRSC2Cast BronzeRSV2Cast BronzeHousing – Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concreteor masonry applications.Trim Ring – Die-cast aluminum trim contains less than 0.3% copper to resist corrosion. Cast bronze fixturehas polycarbonate, color-impregnated, dark bronze finish (RSC2 and RSV2 only).Finish – Aluminum parts have zinc-rich primer and thermoset powdercoat for durability. Cast bronze hasnatural finish (RSC2 and RSV2 only).cast Louver Faceplate – Die-cast copper-free aluminum with 45º cutoff, with frosted tempered glass.Cast bronze louver is natural cast bronze with frosted tempered glass (RSC2 and RSV2 only).Amber Lens option (3000k)Opal Faceplate – Opal UV stabilized injection molded polycarbonate with frosted glasssiliconed on inside for durability.Louver Screen Faceplate – Clear UV stabilized injection molded polycarbonate with45º louvered screen insert.LED – Type 1 Luxeon ® high-output LEDs powered at 350mA DC to operate for 50,000 hours.Reflector – Specular aluminum formed reflector.Electrical – Electronic Driver 120 volt AC to 12 volt regulated DC, integral short circuit protection.Wiring – Supply wires connect directly to the quick connect on the integral power supply.ADA Compliant – Compliant when used in indoor and outdoor wall applications.IP RATING – IP66 Dust tight and sealed against direct jets of water.ETL, cETL Listed.Ac c e s s o r i e sCatalog Number DescriptionMAKMMasonry Construction Mounting KitMAKNSNew Stud Wall Construction Mounting KitMAKESExisting Stud Wall Construction Mounting KitNote: All units supplied with mounting hardware for concrete pour installation.If other mounting kits are required, order accessory above.Or d e r i n g Gu i d ePh o t o m e t r i c In f o r m a t io n5-1w leDs2 Foot Mounting Height2.12 1.42 .76 .30 .11 .06Finish(A) Black(B) White Lamping Warm(H) Bronze Sym Optics D3 (3 1 w LEDs) Amber Lens VoltageCatalog Number (N) Natural Cast Bronze K5 or L5 D5 (5 1 w LEDs) (W) (E) 1 20RSC2 (Specify) K5 (Specify) (W) ERSF2 (A,H) L5 (Specify) (W) ERSS2 (A,H) K5 (Specify) ERSV2 (Specify) K5 (Specify) (W) ERS2D-AHO* Black Housing Only for Pre-ShipmentRS2D-BHO* White LED Housing Only for Pre-ShipmentRS2D-HHO* Bronze LED Housing Only for Pre-ShipmentRS2D-NHO* Natural Cast Bronze LED Housing Only for Pre-Shipment*When housing only is ordered for pre-shipment, add suffix “LH” (Less Housing) to complete catalog number to order fixture without housing.12345678910Ft.3-1/2"[89mm]3-1/2"[89mm]1 2 3 4 5RSC2 (Front View)9"[229mm]9"[229mm]Fc2.121.700.850.340.250.170.110.080.050.01RSF2 (Front View)12345678910Ft.9"[229mm]9"[229mm]LEDsSide ViewBottom ViewSide View11/16"[17mm](RSC2, RSF2, RSS2) (RSC2, RSF2, RSS2)(RSV2)11/16"11/16"[17mm] 2-11/16"[17mm]11/16"[68mm]2-11/16"[17mm]2-11/16"[68mm][68mm]3-1/2"1-3/8"2-11/16"[89mm][68mm]3-1/2" [34mm]1-3/8"1-3/8"3-1/2"[89mm] 5/8"[35mm] 11/16"[34mm][89mm] 1-3/8"[16mm]1-3/8"[17mm]4-1/16"3-1/2"5/8"[35mm] 11/16"[34mm][17mm][89mm] 5/8"[103mm]1-3/8"5/16" [16mm]4-1/16"[16mm][34mm]8-1/8"5/8"[8mm][103mm]1/2"5/16"[207mm][16mm][8mm]8-1/8"[12mm]1/2"[207mm][12mm]3-1w leDs2 Foot Mounting Height1.25 .84 .45 .18 .07 .041 2 3 4 5RSS2 (Front View)9"[229mm]9"[229mm]Fc1.251.000.500.200.150.100.070.050.030.01RSV2 (Front View)9"[229mm]9"[229mm]22

Low VoltageAccent Lighting

Tree lighting. Moon lighting. Spot lighting. Grazing. You’ve created the scene.Now it’s time to light it up. Downplay. Accentuate. Soften. Enrich.Bullytes, floodlytes, wall washers, downlytes … the right size, the rightcombination, the right finish.For every effect you can imagine, the keys are here to unlock the beautyof your landscape with light.

ullytesEL1 brassEL1-N Natural Brass• 12 Volt• 10 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast brass with fully-adjustablebrass yoke-mounted arm and brass screws.Includes 30º flood aluminum reflector.Finish – Natural brass finish.Lens – Clear tempered glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtailand a quick connector for easy hookupto the supply cable.ETL, cETL Listed.BL711 aluminumBL711-A Black BL711-G VerdeBL711-H Bronze BL711-T Speckled StoneBL711-U Sienna• 12 Volt• 35 watt maximum (MR11 Lamp)• 20 watt maximum (T3)• 1 /2” NPS fitterHousing – Die-cast aluminum with fully-adjustableswivel arm with vibration-proof locking teeth.Shroud – Gasketed, cast aluminum.Finish – Black, hand-rubbed verde antiqued overblack thermoset powdercoat, bronze, speckled stoneor sienna thermoset powdercoat.Lens – Clear tempered glass.Socket – Bi-pin type (G4).Wiring – Prewired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL Listed 35w maximum.cETL Listed 20w maximum.catalog no. descriptionML7 Louver See page 18for LED models.2-15/16"[75mm]2-5/8"[67mm]4-3/8"[111mm]3-11/16"[94mm]3-7/8"[98mm]2"[51mm]25

BL756 AluminumBL756-A Black BL756-G VerdeBL756-H Bronze BL756-T Speckled StoneBL756-U Sienna• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – Die-cast aluminum with fully-adjustableswivel arm with vibration-proof locking teeth.Shroud – Gasketed, cast aluminum.Finish – Black, hand-rubbed verde antiqued overblack thermoset powdercoat, bronze, speckled stoneor sienna thermoset powdercoat.Lens – Clear tempered glass.Socket – Single contact bayonet (S-8).Wiring – Prewired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.BL616 AluminumBL616-A BlackBL616-H BronzeBL616-U SiennaBL616-G VerdeBL616-T Speckled Stone• 12 Volt• 50 watt maximum• MR16 Lamp• 1/2” NPS fitterHousing – Die-cast aluminum with fully-adjustableswivel arm with vibration-proof locking teeth.Shroud – Gasketed, cast aluminum.Finish – Black, hand-rubbed verde antiquedover black thermoset powdercoat, bronze,speckled stone or sienna thermoset powdercoat.Lens – Clear tempered glass.Socket – Bi-pin type (GU5.3).Wiring – Prewired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL Listed 50w maximum.cETL Listed 35w maximum.catalog no.descriptioncatalog no.descriptioncatalog no.descriptionML7LouverMGM1LouverMLS1Spread LensMLB1Ice Blue LensMLS2Linear Spread Lens4-3/8"[111mm]5-1/2"[141mm]3-7/8"[98mm]2"[51mm]4-3/16"[107mm]3"[77mm]26

ullytesBL5016 AluminumBL5016-A BlackBL5016-H BronzeBL5016-U SiennaBL5016-G VerdeBL5016-T Speckled Stone• 12 Volt• 50 watt maximum• MR16 Lamp• 1/2” NPS fitterHousing – Die-cast marine grade aluminum alloy withfully-adjustable swivel arm with vibration-proof locking teeth.Shroud – Fully-rotatable, double gasketed,die-cast marine grade aluminum alloy.Finish – Black, hand-rubbed verde antiqued over black,bronze, speckled stone or sienna thermoset powdercoat.Lens – Clear tempered glass, affixed at 10° anglefor natural cleaning.Socket – Bi-pin type (GU5.3).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.catalog no.descriptioncatalog no.descriptionBUL16 CompositeBUL16-A Black BUL16-G VerdeBUL16-H Bronze• 12 Volt• Clear Tempered Lens• 35 watt maximum• MR16 Lamp• 1/2” NPS fitterHousing – One-piece injection molded ULTEM ®High Performance Polymer with fully-adjustableswivel arm with vibration-proof locking teeth.Shroud – Fully-rotatable, gasketed, ULTEM ®High Performance Polymer composite.Finish – Color impregnated material in black, bronze,or hand-rubbed verde antiqued over black.Lens – Clear tempered glass affixed at 10° anglefor natural cleaning.Socket – Bi-pin type (GU5.3).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.catalog no.descriptioncatalog no.descriptionICG16 LouverISL16Spread LensICG16 LouverISL16Spread LensIBL16Ice Blue LensIAS16 Linear Spread LensIBL16Ice Blue LensIAS16 Linear Spread Lens5-13/16"[147mm]See page 19for LED models.6-1/2"[165mm]2-3/8"[60mm]2-13/16"[71mm]2-3/8"[60mm]3-1/8"[80mm]27

ullytesGABL16 CopperGABL16-AC Hand-Crafted Copper• 12 Volt• 35 watt maximum• MR16 Lamp• 1/2” NPS fitterHousing – Hand-formed solid copper.Die-cast brass, fully-adjustable swivel armwith vibration-proof locking teeth and brass fastener.Finish – Natural copper with hand-appliedoxide coating will age naturally to a fine patina.Lens – Clear tempered glass.Socket – Bi-pin type (GU5.3).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL Listed 35w maximum.cETL Listed 20w maximum.BL36 AluminumBL36-A BlackBL36-G VerdeBL36-H Bronze BL36-T Speckled StoneBL36-U Sienna• 12 Volt• 50 watt maximum• PAR36 Lamp• 1/2” NPS fitterHousing – Die-cast aluminum with fully-adjustableswivel arm with vibration-proof locking teeth.Shroud – Fully-rotatable, die-cast aluminum.Finish – Black, hand-rubbed verde antiquedover black thermoset powdercoat, bronze,speckled stone or sienna thermoset powdercoat.Socket – Double screw terminal.Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.2-3/8"[60mm]8-1/4"[210mm]2-1/4"[57mm]2-3/8"[60mm]6-3/8"[162mm]5-1/8"[130mm]29

BPL36 CompositeBPL36-A Black BPL36-G VerdeBPL36-H Bronze• 12 Volt• 50 watt maximum• PAR36 Lamp• 1/2” NPS fitterHousing – One-piece injection moldedpolyester resin with fully-adjustable swivel armwith vibration-proof locking teeth.Shroud – Fully-rotatable, injection moldedpolyester resin.Finish – Color impregnated material in black,bronze, or hand-rubbed verde antiqued over black.Socket – Double screw terminal.Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.BL1 Aluminum (LONG SHROUD)BL1-AL BlackBL1-HL BronzeBL1-UL SiennaBL1-GL VerdeBL1-TL Speckled Stone• 12 Volt• 75 watt maximum• MR16 Lamp• 1/2” NPS fitterHousing – Die-cast aluminum with fully-adjustableswivel arm with vibration-proof locking teeth.Shroud – Fully-rotatable, gasketed, die-cast aluminum.Finish – Black, hand-rubbed verde antiquedover black thermoset powdercoat, bronze, speckled stoneor sienna thermoset powdercoat.Lens – Clear tempered glass.Socket – Bi-pin type (GU5.3).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.catalog no.descriptioncatalog no.descriptionICG16 LouverISL16Spread LensIBL16Ice Blue LensIAS16 Linear Spread Lens6-3/8"[162mm]2-3/8"[60mm]5-1/8"[130mm]30

ullytesBL1 Aluminum (SHORT SHROUD)BL1-AS BlackBL1-HS BronzeBL1-US SiennaBL1-GS VerdeBL1-TS Speckled Stone• 12 Volt• 75 watt maximum• MR16 Lamp• 1/2” NPS fitterHousing – Die-cast aluminum with fully-adjustableswivel arm with vibration-proof locking teeth.Shroud – Fully-rotatable, gasketed, cast aluminum.Finish – Black, hand-rubbed verde antiqued over blackthermoset powdercoat, bronze, speckled stone or siennathermoset powdercoat.Lens – Clear tempered glass.Socket – Bi-pin type (GU5.3).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.BUL1 Composite (LONG SHROUD)BUL1-AL BlackBUL1-GL VerdeBUL1-HL Bronze• 12 Volt• Clear Tempered Lens• 50 watt maximum• MR16 Lamp• 1/2” NPS fitterHousing – One-piece injection molded ULTEM ®High Performance Polymer composite with fully-adjustableswivel arm with vibration-proof locking teeth.Shroud – Fully-rotatable, gasketed, ULTEM ®High Performance Polymer composite.Finish – Color impregnated material in black,bronze, or hand-rubbed verde antiqued over black.Lens – Clear tempered glass.Socket – Bi-pin type (GU5.3).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.catalog no.descriptioncatalog no.descriptioncatalog no.descriptioncatalog no.descriptionICG16 LouverISL16Spread LensICG16 LouverISL16Spread LensIBL16Ice Blue LensIAS16 Linear Spread LensIBL16Ice Blue LensIAS16 Linear Spread LensSee page 19for LED models.31

CAL1 AluminumCAL1-G Verde• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – Cast aluminum constructionwith non-ferrous fasteners.Finish – Hand-rubbed verde antiquedover black thermoset powdercoat.Lens – Clear polycarbonate shield.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.AAL1 AluminumAAL1-A Black AAL1-G Verde• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – Cast aluminum constructionwith non-ferrous fasteners.Finish – Black thermoset powdercoator hand-rubbed verde antiqued over blackthermoset powdercoat.Lens – Clear polycarbonate shield.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.4-7/8"[123mm]2"[51mm]5-1/4"[133mm]2-1/8"[54mm]7-3/8"[187mm]7-1/2"[191mm]34

WALL WASHERS/downlytesAUL1 CompositeAUL1-A BlackAUL1-G Verde• 12 Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Injection molded ULTEM ® HighPerformance Polymer composite with adjustableswivel arm with vibration-proof locking teeth.Finish – Color impregnated black or hand-rubbedverde antiqued over black.Lens – Clear polycarbonate shield.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL Listed 20w maximum.cETL Listed 10w maximum.GAWL1 CopperGAWL1-AC Hand-Crafted Copper• 12 Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Hand-formed solid copper,with hand-applied oxide coating.Finish – Natural copper will age naturallyto a fine patina.Lens – Clear polycarbonate shield.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.5-3/8"[137mm]2-5/8"[67mm]6-15/16"[176mm]7-1/4"[184mm]8-1/2"[216mm]35

GAHL1 CopperGAHL1-AC Hand-Crafted Copper• 12 Volt• 27 watt maximum• 1156 Lamp (included)Housing – Hand-formed solid copperwith hand-applied oxide coating.12” hanging kit included.Finish – Natural copper will age naturallyto a fine patina.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtailand a quick connector for easy hookupto the low voltage supply cable.ETL, cETL Listed.DL1 AluminumDL1-A BlackDL1-G Verde• 12 Volt• 27 watt maximum• 1156 Lamp (included)Housing – Cast aluminum top capwith aluminum body and 5-ft. stainlesssuspension cable.Finish – Black thermoset powdercoat orhand-rubbed verde antiqued over blackthermoset powdercoat.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtailand a quick connector for easy hookupto the low voltage supply cable.UL, cUL Listed.4-7/16"[113mm]3-13/16"[97mm]7-1/4"[184mm]2-1/2"[64mm]36

DOWNLYTESDRL1 AluminumDRL1-A BlackDRL1-G Verde• 12 Volt• 35 watt maximum• MR16 LampHousing – Cast aluminum top capwith aluminum body and 5-ft. stainlesssuspension cable.Finish – Black thermoset powdercoator hand-rubbed verde antiqued over blackthermoset powdercoat.Lens – Clear tempered glass.Socket – Bi-pin type (GU5.3).Wiring – Pre-wired with 3-ft. pigtailand a quick connector for easy hookupto the low voltage supply cable.ETL Listed 35w maximum.cETL Listed 20w maximum.DSL2 AluminumDSL2-A BlackDSL2-B White• 12 Volt• 18 watt maximum• 1141 Lamp (included)Housing – Machined aluminum top capand cast aluminum body with adjustable yoke.Finish – Black or white thermoset powdercoat.Lens – Frosted tempered glass lens.Socket – Single contact bayonet base (S-8).Wiring – Pre-wired with 3-ft. pigtailand a quick connector for easy hookupto the supply cable.ETL, cETL Listed.DRL2 AluminumDRL2-A Black DRL2-G Verde• 12 Volt• 35 watt maximum• MR16 LampHousing – Cast aluminum top cap withaluminum body and adjustable mounting yoke.Finish – Black thermoset powdercoator hand-rubbed verde antiquedover black thermoset powdercoat.Lens – Clear tempered glass.Socket – Bi-pin type (GU5.3).Wiring – Pre-wired with 3-ft. pigtailand a quick connector for easy hookupto the supply cable.ETL Listed 35w maximum.cETL Listed 20w maximum.6-1/16"[154mm]2-13/16"[71mm]3-5/8"[92mm]2-1/2"[64mm]6-7/16"[164mm]3-9/16"[90mm]37

Low VoltageAccent Inground L Lighting

Inground lighting provides a low profile light source, creating a dramatic effectthat brings the subject alive.Our inground products do exactly that, and do it well. Designed to blendinto a variety of settings and terrain, our ingrounds are available with your choiceof trim rings, rock guards and accessories. Properly installed, they’ll gildyour landscape for years.

ingroundsIL116/IL136 composite trimringcomposite ROCK GUARDCAST BRONZETRIM RINGCAST BRONZEROCK GUARDSTAINLESS STEELBRUSED MATTE FINISHTRIM RINGHousing – Single-piece compression molded, fiberglass reinforced polyester composite housing.Trim Ring – Compression molded polyester; or die-cast stainless steel; or natural cast bronze.Rock Guard – Directional for glare control. Compression molded polyester or natural cast bronze.Lens – Clear convex, tempered soda-lime glass for high impact resistance. 2,200-pound live-load rated, standard walk-over.Socket – MR 16: bi-pin type (GU5.3). PAR36/AR 111: double screw terminal baseElectrical – Low voltage fixtures supplied with 3-ft. of 18-2 direct burial cable and low voltage quick connector.Aiming – MR 16 and PAR36 lamps have 15º either side of vertical and 358º rotation.ADA Compliant – Compliant when used in concrete and flush mounted with CP2 or CPS2.ETL, cETL Listed.41

Ac c e s s o r i e sCP2PVC ConcretePour Kit.CPS2Stainless SteelConcretePour Kit.IBL16Internal Snap-onIce BlueTempered Lens.Lamp – MR16ICG16Internal Snap-onHoneycombLouver.Lamp – MR16ICG36Internal Snap-onHoneycombLouver.Lamp – PAR36IBL1Exterior Ice BlueTempered Lens.IAS16Internal LinearSpread Lens.Lamp – MR16ISL16Internal Snap-onSpread Lens.Lamp – MR16IS1HCast AluminumExterior GlareShield.Finish –Bronze ColorCan not beused withrockguard.IL136(with trim ring)IL116(with rock guard)6-5/8"[169mm]6-5/8"[169mm]6-5/8"169mm]6-5/8"[169mm]8-1/4"[209mm]2-1/8"[54mm] 1-1/2"[38mm]8-7/16"[214mm]2-1/8"[54mm] 1-1/2"[38mm]Lo w Vo l t a g e In g r o u n d Pr o d u c t Selection Gu i d eCatalogMaxNumber Description Finish Wattage LampIL116-H Composite Inground with Composite Trim Ring Bronze 75w MR 16IL116G-H Composite Inground with Composite Rock Guard Bronze 75w MR 16IL116-N Composite Inground with Cast Bronze Trim Ring Natural Cast Bronze 75w MR 16IL116G-N Composite Inground with Cast Bronze Rock Guard Natural Cast Bronze 75w MR 16IL116-SS Composite Inground with Stainless Steel Trim Ring Stainless Steel 75w MR 16IL136-H Composite Inground with Composite Trim Ring Bronze 75w PAR36 / AR 111IL136G-H Composite Inground with Composite Rock Guard Bronze 75w PAR36 / AR 111IL136-N Composite Inground with Cast Bronze Trim Ring Natural Cast Bronze 75w PAR36 / AR 111IL136G-N Composite Inground with Cast Bronze Rock Guard Natural Cast Bronze 75w PAR36 / AR 111IL136-SS Composite Inground with Stainless Steel Trim Ring Stainless Steel 75w PAR36 / AR 11142

IngroundsIUL516 CompositeIUL516-H Bronze• 12 Volt• 35 watt maximum• MR16 LampHousing – Single-piece injection moldedfiberglass reinforced ULTEM ® High PerformancePolymer.Lens Ring – Single-piece injection moldedULTEM ® High Performance Polymerwith gasketed lens. Twist-off operationfor ease of maintenance.Finish – Color impregnated bronze composite.Lens – Convex lens is clear, high temperaturetempered glass furnished with silicone O-ringfor watertight seal.Socket – Bi-pin type (GU5.3).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hook-up to the supply cable.ETL, cETL Listed.IL336 CompositeIL336-A Black• 12 Volt• 50 watt maximum• PAR36 LampIL336-AL Black• 12 Volt• 50 watt maximum• PAR36 Lamp (20w included)Housing – Single-piece PVC tube. Straight cut end allows flush groundmounting, and an accessory lens guard (IL3H) or rock guard (IG3H or IG30H)may be ordered separately, but is not required. Angled cut end requiresthe top 3” installed above ground for maximum vertical spot aimingwith shielding being provided on three (3) sides.Lamp Holder (Patented) – Durable silicone rubber lamp holderhas integral fins to allow the height and angle of the lamp to be adjustedwithout any mechanical moving parts. Fixture offers 360° lamp rotation and up to45° off vertical aiming adjustability, restricted only by the cutoff of the housing.Finish – Black silicone lampholder with black PVC sleeve.Lens – Optional lens available, see below.Socket – Double screw terminal.Wiring – 3-ft. of 18-2 low voltage cable with a low voltage quick connectorfor easy hook-up to the low voltage supply cable.ETL, cETL Listed.catalog no.descriptionICG16 Louvercatalog no.ISL16descriptionSpread Lenscatalog no.IG3HdescriptionRockguardwith Lenscatalog no.IG30HdescriptionRockguardwithout LensIBL16Ice Blue LensIAS16 Linear Spread LensIL3HLens GuardCP5ConcretePour KitAbove accessories to be used with straight cut end only.See page 20for LED models.5-5/8"[143mm]4-3/8"[111mm]4-1/8"[105mm]4-1/8"[105mm]8"[203mm]43

Low Voltage IngrounD InstallationInstallation of inground fixtures requires special consideration. Proper grading, drainage material and tightly securing the lens and gasketare procedures that are key to a successful inground installation. The following are basic steps in installing inground fixtures in either concrete(using the concrete pour accessory) or soil. For greater detailed instructions, refer to the installation sheet enclosed with each fixture.C o n c r e t e In s t a l l a t i o n (IL116 Shown)NOTE: To ensure proper drainage, prepare gravel foundation. Make certain that the concrete level, when poured, will be flush with the topof the concrete pour accessory.1. Remove trim ring and lens and install specified lamp. Replace trim ring and lens.2. Position the fixture housing into the concrete pour accessory, making sure that the underside of the housing flange rests on topof the set screws. Tighten set screws on side of accessory to lock the housing into place (do not over-tighten). Secure assemblyto the final location with re-bar or other anchoring device.3. Excavate soil where the fixture is to be installed.4. Place assembly into excavated opening. Be sure there is a minimum of 3” of drainage material (sand or gravel only) covering the bottomof the hole.5. Fill area with a minimum of 3” of drainage material. Be sure not to fill area flush with top of frame and assembly. This is to be filledwith concrete.6. Connect low voltage fixture wire to low voltage cable running to remote transformer, using silicone wire nuts or quick connector (supplied).7. Pour concrete. Remember that fixture position cannot be altered after the concrete sets.8. Turn power on at transformer.Concrete45

G r o u n d In s t a l l a t i o n (IUL516 Shown)NOTE: Do not place fixture in a below grade location as the fixture will collect dirt and debris, and possibly become submerged in extremelywet conditions. Do not place plantings too close to the fixture as the foliage may grow over the luminaire, blocking the light. Do not allowmulch to touch inground fixture in any way as this may cause the fixture to overheat and fail.1 . Excavate soil for fixture placement and conduit runs, making sure the fixture will be elevated and the grade sloped down from the fixture.Be certain to allow a minimum of 3” of drainage material (sand or gravel only) under and around the housing.2. Remove trim ring and lens and install specified lamp. Replace trim ring.3. After drainage material is installed in the bottom, place fixture housing into hole, back-filling a minimum of 3” of drainage material(sand or gravel only) around the side of the housing. Be certain that the underside of housing flange rests on top of grade level.4. Connect low voltage fixture wire to low voltage cable running to remote transformer, using silicone wire nuts or quick connector (supplied).5. Turn power on at transformer.1583 4762Order in which to tighten screws.DrainageGravel(3” minimum)46

Low Voltagestep and deck Lighting

Shining beauty. Radiant safety. Glowing ambiance.From decorative to utilitarian and everything in between,our step and deck fixtures give you the power to createoutdoor living spaces people will treasure.Broaden the boundaries … and make the outdoors outstanding.

DECKlytesGADL1 CopperGADL1-AC Hand-Crafted Copper• 12 Volt• 10 watt maximum• 10 watt Xenon lamp (included)Housing – Hand-formed solid copper.Finish – Natural copper with hand-applied oxidecoating will age naturally to a fine patina.Socket – Wedge base.Wiring – Pre-wired with 6-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.GADL2 CopperGADL2-AC Hand-Crafted4"Copper[102mm]• 12 Volt• 12 watt maximum• 10 watt Xenon lamp (included)Housing – Hammered solid copper with1-3/4" copper back plate. 2-9/16"[44mm] [65mm]Finish – Natural copper with hand-applied oxidecoating for pre-aged appearance. Will age naturallyto a fine patina.Socket – Wedge base.Wiring – Pre-wired with 6-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.CUL20 CopperCUL20 Copper• 12 Volt• 12 watt maximum• 10 watt Xenon lamp (included)Housing – Spun solid copper.Finish – Natural copper will age naturally toa fine patina. Reflective white powdercoat onunderside of roof.Socket – Wedge base.Wiring – Pre-wired with 6-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Mounting Height36”30”24”18”1.0 Horizontal Foot Candles 36” 1.0 Horizontal Foot Candles 36” 1.0 Horizontal Foot Candles.71.6.8.32.4.2.41.03.5.15.2.51.1.1 .1.2.3.05.08.08 .08.051’ 2’ 3’ 4’ 5’ 6’ 7’ 8’Distance From LampMounting Height30”24”18”.71.6.8.32.4.2.41.03.5.15.2.51.1.1 .1.2.3.05.08.08 .08.051’ 2’ 3’ 4’ 5’ 6’ 7’ 8’Distance From LampMounting Height30”24”18”.71.6.8.32.4.2.41.03.5.15.2.51.1.1 .1.2.3.05.08.08 .08.051’ 2’ 3’ 4’ 5’ 6’ 7’ 8’Distance From Lamp3-7/8"[98mm]2-1/16"[52mm]3-5/8"[92mm]4"[102mm]3"[76mm]1-3/4"[44mm]1-7/16"[37mm]1-3/4"[44mm]2-9/16"[65mm]49

DUL1CompositeDCL1BrassDAL1AluminumDAL1-SSSTAINLESS STEELDUL1-A BlackDUL1-G VerdeDUL1-H Bronze• 12 Volt• 10 watt maximum• T3 Lamp (included)Housing – Injection fiberglassreinforced molded ULTEM ® HighPerformance Polymer housing withstainless steel set screws.Finish – Color impregnated black,bronze, or hand-rubbed verdeantiqued over black.Lens – Frosted annealed glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with 6-ft.pigtail and a quick connector for easyhookup to the supply cable.ETL, cETL Listed.DCL1-N Natural Brass• 12 Volt• 10 watt maximum• T3 Lamp (included)Housing – Solid die-cast brasshousingand backplate with stainless steel setscrews.Finish – Natural brass finish.Lens – Frosted annealed glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with 6-ft.pigtail and a quick connector for easyhookup to the supply cable.ETL, cETL Listed.DAL1-A BlackDAL1-B WhiteDAL1-G VerdeDAL1-H BronzeDAL1-T Speckled StoneDAL1-U Sienna• 12 Volt• 10 watt maximum• T3 Lamp (included)Housing – Cast aluminumconstruction with stainless steel setscrews.Finish – Black, white, hand-rubbedverde antiqued over black thermosetpowdercoat, bronze, speckled stone,or sienna thermoset powdercoat.Lens – Frosted annealed glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with 6-ft.pigtail and a quick connector for easyhookup to the supply cable.DUL1-SS Stainless Steel• 12 Volt• 10 watt maximum• T3 Lamp (included)Housing – Stainless steel housingwith stainless steel set screws.Finish – Stainless steel brushedmatte finishLens – Frosted annealed glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with 6-ft.pigtail and a quick connector for easyhookup to the supply cable.ETL, cETL Listed.ETL, cETL Listed.36”1.2Horizontal Foot CandlesMounting Height30”24”18”1.92.62.6.5.6.5.1.1.5.15.1.08.08.09.05.07.07.05.05.05.0.01’ 2’ 3’ 4’ 5’ 6’ 7’ 8’Distance From Lamp3-1/2"[89mm]1-7/8"[48mm]50

DECKlytesSRL4 AluminumSRL4-A BlackSRL4-G VerdeSRL4-B WhiteSRL4-H Bronze• 12 Volt• 12 watt maximum• 10 watt Xenon lamp (included)Housing – Cast aluminum construction.Finish – Black, white, hand-rubbed verdeantiqued over black thermoset powdercoat, orbronze thermoset powdercoat.Socket – Wedge base.Wiring – Pre-wired with 6-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.SRL3 AluminumSRL3-A BlackSRL3-H Bronze• 12 Volt• 18 watt maximum• 1141 Lamp (included)Housing – Die-cast aluminum with stainlesssteel fasteners.Finish – Black or bronze thermoset powdercoat.Lens – Frosted tempered glass.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with 6-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.DSL1 AluminumDSL1-A BlackDSL1-B White• 12 Volt• 18 watt maximum• 1141 Lamp (included)Housing – Die-cast aluminum with stainlesssteel fasteners.Finish – Black or white thermoset powdercoat.Lens – Frosted tempered glass.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with 6-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Mounting Height36”30”24”18”1.0 Horizontal Foot Candles 36” 1.0 Horizontal Foot Candles 36” 1.0 Horizontal Foot Candles.71.6.8.32.4.2.41.03.5.15.2.51.1.1 .1.2.3.05.08.08 .08.051’ 2’ 3’ 4’ 5’ 6’ 7’ 8’Distance From LampMounting Height30”24”18”.71.6.8.32.4.2.41.03.5.15.2.51.1.1 .1.2.3.05.08.08 .08.051’ 2’ 3’ 4’ 5’ 6’ 7’ 8’Distance From LampMounting Height30”24”18”.71.6.8.32.4.2.41.03.5.15.2.51.1.1 .1.2.3.05.08.08 .08.051’ 2’ 3’ 4’ 5’ 6’ 7’ 8’Distance From Lamp2"[51mm]2-3/8"[60mm]3-1/2"[89mm] 2-1/16"[52mm]2-1/2"[64mm]4-3/8"[111mm]3-1/4"[83mm]1-3/4"[44mm]51

GACL1 Natural CopperGACL1-AC Hand-Crafted CopperDown Lyte• 12 Volt• 10 watt maximum• 10 watt Xenon lamp (included)Housing – Hand-formed solid copper.Finish – Natural copper with hand-appliedoxide coating will age naturally to a fine patina.Socket – Wedge base (T5).Wiring – Pre-wired with a 6-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.GACL2 Natural CopperGACL2-AC Hand-Crafted CopperUp and Down Lyte• 12 Volt• 10 watt maximum• 10 watt Xenon lamp (included)Housing – Hand-formed solid copper.Finish – Natural copper with hand-appliedoxide coating will age naturally to a fine patina.Lens – Frosted tempered glass.Socket – Wedge base (T5).Wiring – Pre-wired with a 6-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.RL13 CompositeRL13-A Black• 12 Volt• 10 watt maximum• T3 Lamp (included)• Adjustable beamHousing – Injection-molded Ryton ® composite.Finish – Color impregnated black.Lens – Molded prismatic acrylic rotatableto allow adjustable light distribution.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 6-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.2-15/16"[75mm]1-9/16"[40mm]2-15/16"[75mm]1-9/16"[40mm]3-3/8"[86mm]1-15/16"[49mm]2-3/16"[55mm]5-1/8"[130mm]5-1/8"[130mm]52

DECKlytesDL4 BrassDL4-N Natural Brass• 12 Volt• 20 watt maximum• T3 Lamp (10 watt included)• Standard 4” x 4” post mountHousing – Constructed of natural die-castbrass with brass fasteners.Finish – Natural brass will age over time.Can be field painted.Lens – Polycarbonate refractive lens.Reflector – Field adjustable four-sidedhouse-side shield allows light distributionfrom 1, 2, 3 or all 4 sides.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 6-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.DL5 BrassDL5-N Natural Brass• 12 Volt• 20 watt maximum• T3 Lamp (10 watt included)• Standard 4” x 4” wood post mountHousing – Constructed of natural die-castbrass with brass fasteners.Finish – Natural brass will age over time.Can be field painted.Lens – Polycarbonate refractive lens.Reflector – Field adjustable four-sidedhouse-side shield allows light distributionfrom 1, 2, 3 or all 4 sides.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 6-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.GADL4 CopperGADL4-AC Hand-Crafted Copper• 12 Volt• 20 watt maximum• T3 Lamp (10 watt included)• Standard 4” x 4” wood post mountHousing – Hand-formed solid copper.Brass screws and finial.Finish – Natural copper with hand-appliedoxide coating will age naturally to a fine patina.Lens – Polycarbonate refractive lens.Reflector – Field adjustable, four-sidedhouse-side shield allows light distributionfrom 1, 2, 3 or all 4 sides.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 6-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.3-1/8"[78mm]4-7/8"[123mm]4-11/16" 4-5/32"[119mm] [106mm]4-7/8"[124mm]3-3/16"[81mm]2-3/8"[60mm]4-9/16"[116mm]3-5/8"[91mm]Inside Dimension3-5/8"[92 mm]Inside Dimension3-1/2"[89 mm]Inside Dimension53

GADL51/GADL52 CopperGADL51-AC Hand-Crafted CopperGADL52-AC Hand-Crafted Copper• 12 Volt• 35 watt maximum• T3 Lamp (20 watt included)Housing – Hand-formed solid copper sheetwith brass screws.Post Fitter* – 4” x 4” formed solid copper fitter.Consult factory for addtional fitter sizes.Finish – Natural copper with hand-applied oxidecoating for pre-aged appearance. Will age naturallyto a fine patina.Glass – Honey-colored iridized art glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 6-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.*GADL51-AC fits over standard wooden 4” x 4” post.*GADL52-AC fits over standard vinyl 4” x 4” post.GADL61/GADL62 CopperGADL61-AC Hand-Crafted CopperGADL62-AC Hand-Crafted Copper• 12 Volt• 35 watt maximum• T3 Lamp (20 watt included)Housing – Hand-formed solid copper sheetwith brass screws.Post Fitter* – 6” x 6” formed solid copper fitter.Consult factory for addtional fitter sizes.Finish – Natural copper with hand-applied oxidecoating for pre-aged appearance. Will age naturallyto a fine patina.Glass – Honey-colored iridized art glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 6-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.*GADL61-AC fits over standard wooden 6” x 6” post.*GADL62-AC fits over standard vinyl 6” x 6” post.GADL51-AC6-1/2"[165mm]GADL52-AC6-1/2"[165mm]GADL61-AC6-1/2"[165mm]GADL62-AC6-1/2"[165mm]9-5/8"[244mm]10-3/8"[264mm]10-3/8"[264mm]10-3/8"[264mm]3-1/2"[89mm]Inside Dimension4-1/16"[103 mm]Inside Dimension5-11/16"[144 mm]Inside Dimension5-15/16"[151 mm]Inside Dimension54

steplytesRLL2 CopperRLL2-PC Copper• 12 Volt• 12 watt maximum• 93 Lamp (included)Housing – Solid copper louveredfaceplatewith galvanized steel, single gangrecessed back box.Finish – Natural untreated copperwill patinawith age.Lens – Frosted, tempered glassbehind louvers.Socket – Single contact bayonet(S-8).Mounting – Mounting hardwareincluded.Wiring – Prewired with a 6-ft.pigtail and quick connector for easyhookup to the supply cable.Box Dimensions –2-1/4” W [50mm]3-1/2” L [89mm]2-3/4” D [70mm]RLL2 Stainless SteelRLL2-SS Stainless Steel Brushed MatteFinish• 12 Volt• 12 watt maximum• 93 Lamp (included)Housing – Stainless steel louveredfaceplatewith galvanized steel, single gangrecessed back box.Finish – Stainless steel brushedmatte finishLens – Frosted, tempered glassbehind louvers.Socket – Single contact bayonet(S-8).Mounting – Mounting hardwareincluded.Wiring – Prewired with a 6-ft.pigtail and quick connector for easyhookup to the supply cable.Box Dimensions –2-1/4” W [50mm]3-1/2” L [89mm]2-3/4” D [70mm]RLL1 AluminumRLL1-A Black• 12 Volt• 12 watt maximum• 93 Lamp (included)Housing – Die-cast aluminumfaceplatewith galvanized steel, single gangrecessed boxwith stainless steel fasteners.Finish – Black thermosetpowdercoat.Lens – Frosted tempered glass.Socket – Single contact bayonet(S-8).Mounting – Mounting hardwareincluded.Wiring – Pre-wired with a 6-ft.pigtailand a quick connector for easy hookupto the supply cable.Box Dimensions –2-1/4” W [50mm]3-1/2” L [89mm]2-3/4” D [70mm]RFL1 AluminumRFL1-A Black• 12 Volt• 12 watt maximum• 93 Lamp (included)Housing – Die-cast aluminumfaceplatewith galvanized steel, single gangrecessed boxwith stainless steel fasteners.Finish – Black thermosetpowdercoat.Lens – Frosted tempered glass.Socket – Single contact bayonet(S-8).Mounting – Mounting hardwareincluded.Wiring – Pre-wired with a 6-ft.pigtailand a quick connector for easy hookupto the supply cable.Box Dimensions –2-1/4” W [50mm]3-1/2” L [89mm]2-3/4” D [70mm]4-5/8"[116mm]4-5/8"[116mm]4-5/8"[116mm]4-5/8"[116mm]2-13/16"[71mm]2-13/16"[71mm]2-13/16"[71mm]2-13/16"[71mm]55

RRCBL1 Aluminum 1"[25mm]RRCBL1-A Black RRCBL1-B White LLL6RRCBL1-H Bronze• 12 Volt• 50 watt maximum• MR16 Lamp• For masonry, concrete or deckmounting only.Housing – One-piece cast aluminumhousing, cast aluminum faceplate with stainlesssteel fasteners.Finish – Thermoset powdercoat in black, 1"white or bronze.[25mm]LLL24Lens – Tempered glass spread lens.Socket – Bi-pin type (GU5.3).Wiring – Pre-wired with a 6-ft. cord and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.1"[25mm]LLL66"[152mm]4-1/2"[114mm]LLL CopperLLL6-AC LLL12-AC LLL24-AC• 12 Volt 6"• 10[152mm]watt maximum• Wedge4-1/2"1"[114mm] base Xenon lamp (included)[25mm]Material – Solid copper square extrusionLLL12with solid copper ends.Finish – Natural copper will patina with age.Socket – Wedge base hinged for easyrelamping (LLL24 has two (2) sockets each).Reflector – Stainless steel.Mounting – Two (2) stainless #8 woodscrews (supplied) via key slots.Wiring – Pre-wired with a 6-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.LLL Stainless SteelLLL6-SS• 12 VoltLLL12-SS 12"[305mm]LLL24-SS• 10 watt maximum• Wedge base 8" Xenon lamp (included)[203mm]Material – Stainless steel square extrusionwith stainless steel ends.Finish – Stainless steel brushed matte finish.Socket – Wedge base hinged for easyrelamping (LLL24 has two (2) sockets each).1"[25mm] Reflector – Stainless 18" steel.LLL18[457mm]Mounting – Two (2) stainless #8 woodscrews (supplied) via key slots. 14"[356mm]Wiring – Pre-wired with a 6-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.24"[610mm] Note: Line art shown below is LLL12 (12”). Other options avaliable: LLL6 (6”), LLL24 (24”).20"See page 38 for complete LLL series Spec drawings.[508mm]1"[25mm]LLL1212"[305mm]8"[203mm]5-3/8"[136mm]4-11/16"[119mm]1-5/8"[41mm]1"[25mm]LLL2424"[610mm]20"[508mm]1"[25mm]LLL18MPLLL18"[457mm]Mounting Accessory for LLL Linelytes14"Includes two [356mm] hex nuts for easyattachment to fixtureAllows fixture to be mounted underledge of stacked stone or brick wallwithout drilling56

RRBL13-3/16"[81mm]3-3/16"[81mm]3-9/16"[90mm]3-9/16"[90mm]2"[51mm]2"[51mm]RRCL13-3/16"3-3/16" [81mm][81mm]3-9/16"3-9/16" [90mm][90mm]7/8"[23mm] 7/8"[23mm]RRFL13-3/16"[81mm] 3-3/16"[81mm]3-9/16"[90mm] 3-9/16"[90mm]13/16"[20mm] 13/16"[20mm]1-1/16"[27mm]1-1/16"[27mm]2-5/8"[67mm]2-5/8"[67mm]4"[102mm]4"[102mm]11/16"[18mm]11/16"[18mm]1-1/16"1-1/16" [27mm][27mm]2-5/8"2-5/8" [67mm][67mm]4"[102mm] 4"[102mm]11/16"11/16" [18mm][18mm]1-1/16"[27mm] 1-1/16"[27mm]11/16"[18mm] 11/16"2-5/8"[18mm][67mm] 2-5/8"[67mm]4"[102mm] 4"[102mm]Lo w Vo l t a g e Ro u n d St e p l y t e Pr o d u c t Selection Gu i d eT thermalCatalogProtectionNumber Description Finish Device (P)* Max Wattage Lamp SocketRRBL13-A Recessed Steplyte, Bubble Faceplate Black Specify 12w 93** Single Contact BayonetRRBL13-H Recessed Steplyte, Bubble Faceplate Bronze Specify 12w 93** Single Contact BayonetRRBL14-A Recessed Steplyte, Bubble Faceplate Black Specify 10w T3 Bi-PinRRBL14-H Recessed Steplyte, Bubble Faceplate Bronze Specify 10w T3 Bi-PinRRCL13-A Recessed Steplyte, Louver Faceplate Black Specify 12w 93** Single Contact BayonetRRCL13-B Recessed Steplyte, Louver Faceplate White Specify 12w 93** Single Contact BayonetRRCL13-H Recessed Steplyte, Louver Faceplate Bronze Specify 12w 93** Single Contact BayonetRRCL14-A Recessed Steplyte, Louver Faceplate Black Specify 10w T3 Bi-PinRRCL14-B Recessed Steplyte, Louver Faceplate White Specify 10w T3 Bi-PinRRCL14-H Recessed Steplyte, Louver Faceplate Bronze Specify 10w T3 Bi-PinRRFL13-A Recessed Steplyte, Flat Opal Faceplate Black Specify 12w 93** Single Contact BayonetRRFL13-H Recessed Steplyte, Flat Opal Faceplate Bronze Specify 12w 93** Single Contact BayonetRRFL14-A Recessed Steplyte, Flat Opal Faceplate Black Specify 10w T3 Bi-PinRRFL14-H Recessed Steplyte, Flat Opal Faceplate Bronze Specify 10w T3 Bi-Pin* Thermal protection device is required for installations in drywall, plaster, wood or other non-masonry materials. Add the suffix “P” to the catalog number to order.** Lamp included.58

SteplytesCB100 compositeRSBL2 polycarbonateRSFL2 polycarbonateHousing – Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications.Flange – Die-cast aluminum trim contains less than 0.3% copper to resist corrosion. (Note: Flange not included with CB100 fixture.)Finish – Aluminum parts have zinc-rich primer and thermoset powdercoat for durability. Faceplates are color-impregnated.Horizontal Louver FACEPLATE – Injection molded Ryton ® composite with frosted tempered glass, with stainless steel screws.Bubble Faceplate – UV stabilized injection molded colored/clear polycarbonate with stainless steel screws.Opal FACEPLATE – UV stabilized, injection molded polycarbonate, reinforced with frosted tempered glass, with stainless steel screws.Socket – Single contact bayonet (S-8) or bi-pin (G4).Electrical – Low voltage models are pre-wired with 6-ft. cord and low voltage quick connector.ADA Compliant – Compliant when used in indoor and outdoor wall applications.ETL, cETL Listed.Ac c e s s o r i e sCatalog Number DescriptionMAKMMasonry Construction Mounting KitMAKNSNew Stud Wall Construction Mounting KitMAKESExisting Stud Wall Construction Mounting KitMAKEC (CB100 only) Existing Stud Wall Construction Mounting KitNote: All units supplied with mounting hardware for concrete pour installation. If other mounting kits are required, order accessory above.59

1-3/8"[34mm]4-1/16"[103mm]8-1/8"[207mm]11/16"[17mm]CB1002-11/16"[68mm]1-3/8"[34mm]RSBL23-1/2"[89mm]4-1/16"[103mm]11/16"[17mm]5/8"[16mm]11/16"[17mm]9"[229mm]2-11/16"[68mm]1-3/8"[34mm]11[173-1/2"[89mm]1"[26mm]5/8"[16mm]3-1/2"[89mm]1/2"[26mm]9"[229mm]RSFL23-1/2"[89mm]1-3/8"[34mm]8-1/8"[207mm]11/16"[17mm]2-5/8"[67mm]11/16"[17mm]11/16"[17mm]5/16"[8mm]9"[229mm]9"[229mm]5/8"[16mm]5/16"[8mm]5/8"Bottom for RSBL2, RSFL2, [16mm]1-3/8"[34mm]2-11/16" 1-3/8"[68mm] [34mm]2-11/16"3-1/2"[68mm][89mm]3-1/2"[89mm]3-1/2"[89mm]11/16"[17mm]11/16"[17mm][Lo w Vo l t a g e St e p l y t e Pr o d u c t Selection Gu i d e1-3/8"[34mm]1-3/8"[34mm]4-1/16"[103mm]8-1/8"[207mm] 4-1/16"[103mm]8-1/8"[207mm]11/16"[17mm]11/16"[17mm]3-1/2"[89mm]T thermal3-1/2"CatalogProtection 9"[89mm]Number Description Finish Device (P)* Max [229mm] Wattage Lamp SocketCB100AK5812 Recessed Steplyte, Composite Louvered Faceplate Black Specify 2- 1 8w 114 1 **11/16"1-3/8" Single Contact BayonetCB100HK5812 Recessed Steplyte, Composite Louvered Faceplate Bronze Specify [17mm] 2- 1 8w 9" 114 1 ** [34mm] Single Contact Bayonet[229mm]RSBL2AT5412 Recessed Steplyte, Bubble Faceplate Black Specify 20w T3 Bi-PinRSBL2HT5412 Recessed Steplyte, Bubble Faceplate Bronze Specify 11/16" 20w T31-3/8"2-11/16" Bi-PinRSFL2AL5812 Recessed Steplyte, Flat Opal Faceplate Black Specify [17mm][34mm]2- 1 8w 114 [68mm] 1 ** Single Contact BayonetRSFL2HL5812 Recessed Steplyte, Flat Opal Faceplate Bronze Specify1"2- 1 8w 114 1 ** Single Contact Bayonet2-11/16"RS2-AHO*** Housing Only for Pre-Shipment Black [26mm] n/a n/a n/a 3-1/2" [68mm]n/aRS2-HHO*** Housing Only for Pre-Shipment Bronze n/a n/a [89mm] n/a n/a5/8"1/2"1"* Thermal protection device is required for installations in drywall, plaster, wood or other non-masonry materials. [16mm] Add the suffix “P” to the catalog number to order. [26mm][26mm]3-1/2"** Lamp Included.[89mm]*** When housing only is ordered for pre-shipment, add suffix “LH” (Less Housing) to complete catalog 5/8"1/2"number to order fixture without housing.[16mm][26mm]6011[1711[17

SteplytesRSCL2 aluminumRSVL2 aluminumRSCL2 cast bronzeRSVL2 cast bronzeHousing – Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications.Flange – Die-cast aluminum trim contains less than 0.3% copper to resist corrosion.Finish – Aluminum parts have zinc-rich primer and thermoset powdercoat for durability.FACEPLATE – Die-cast copper free aluminum with 45º cutoff, with frosted tempered glass. Cast bronze louver is natural cast bronze with frosted tempered glass.Socket – Single contact bayonet (S-8) or bi-pin (G4).Electrical – Low voltage models are pre-wired with 6-ft. cord and low voltage quick connector.ADA Compliant – Compliant when used in indoor and outdoor wall applications.ETL, cETL Listed.Ac c e s s o r i e sCatalog Number DescriptionMAKMMasonry Construction Mounting KitMAKNSNew Stud Wall Construction Mounting KitMAKESExisting Stud Wall Construction Mounting KitNote: All units supplied with mounting hardware for concrete pour installation. If other mounting kits are required, order accessory above.61

[17mm]5/16"[8mm]5/8"[16mm]2-11/16"[68mm]3-1/2"[89mm][17mm]1/4"[26mm]5/8"[16mm]2-11/16"[68mm]3-1/2"[89mm]11/16"[17mm]9"[229mm]2-11/16"[68mm][89mm]1-3/8"[34mm]]3-1/2"5/16"[89mm][8mm]5/8"RSCL2 RSVL2 Bottom[16mm]for RSCL2, RSVL23-1/2"1-3/8"11/16" [89mm][34mm]4-1/16" [17mm][103mm]9"8-1/8" 9"[229mm][207mm][229mm]11/16"[17mm]1"[26mm]11/16"[17mm]9"[229mm]1/4"[26mm]5/8"[16mm]5/8"[16mm]9"[229mm]1-3/8"[34mm]2-11/16" 3-1/2"[89mm] [68mm]3-1/2"[89mm]3-1/2"[89mm]2-11/16"[68mm]3-1/2"[89mm]1-3/8"[34mm]1/2"[26mm]11/16"[17mm]5/8"[16mm]1-3/8"[34mm]2-11/16"[68mm]3-1/2"[89mm]1-3/8"[34mm]11/16"[17mm]1"[26mm]4-1/16"[103mm]8-1/8"[207mm]9"[229mm]5/8"[16mm]2-11/16"[68mm]3-1/2"[89mm]11/16"[17mm]3-1/2"[89mm]1-3/8"[34mm]3-1/2"[89mm]11/16"[17mm]1-3/8"[34mm]2-11/16"[68mm]Lo w Vo l t a g e St e p l y t e Pr o d u c t Selection Gu i d e3-1/2"T[89mm]thermal1/2" Catalog 5/8"Protection[26mm] Number Description [16mm]Finish Device (P)* Max Wattage Lamp SocketRSCL2AK5812 Recessed Steplyte, Louver Faceplate Black Specify 2- 1 8w 114 1 ** Single Contact BayonetRSCL2BK5812 Recessed Steplyte, Louver Faceplate White Specify 2- 1 8w 114 1 ** Single Contact BayonetRSCL2HK5812 Recessed Steplyte, Louver Faceplate Bronze Specify 2- 1 8w 114 1 ** Single Contact BayonetRSCL2NK5812 Recessed Steplyte, Cast Bronze Louver Faceplate Natural Bronze Specify 2- 1 8w 114 1 ** Single Contact BayonetRSVL2AK5812 Recessed Steplyte, Vertical Louver Faceplate Black Specify 2- 1 8w 114 1 ** Single Contact BayonetRSVL2BK5812 Recessed Steplyte, Vertical Louver Faceplate White Specify 2- 1 8w 114 1 ** Single Contact BayonetRSVL2HK5812 Recessed Steplyte, Vertical Louver Faceplate Bronze Specify 2- 1 8w 114 1 ** Single Contact BayonetRSVL2NK5812 Recessed Steplyte, Cast Bronze Vertical Louver Natural Bronze Specify 2- 1 8w 114 1 ** Single Contact BayonetRS2-AHO*** Housing Only for Pre-Shipment Black n/a n/a n/a n/aRS2-BHO*** Housing Only for Pre-Shipment White n/a n/a n/a n/aRS2-HHO*** Housing Only for Pre-Shipment Bronze n/a n/a n/a n/aRS2-NHO*** Housing Only for Pre-Shipment Natural Bronze n/a n/a n/a n/a* Thermal protection device is required for installations in drywall, plaster, wood or other non-masonry materials. Add the suffix “P” to the catalog number to order.** Lamp Included.*** When housing only is ordered for pre-shipment, add suffix “LH” (Less Housing) to complete catalog number to order fixture without housing.62

steplyte installationtwo (2) l-Bracketscross BracketsFine AdjustmentslotDetachableWiring1/2-14 nPt Plugcompartment4" Round steplyte showncross Bracket slot(nails supppliedby customer)studthermal Protector(Mounted fromInside Housing)Installation for new stud wall(Use Accessory Kit #MAKNS)1. Using the supplied template, cut a level hole throughthe existing wall between studs. (Failure to levelhole will cause fixture to have tilted appearance.)2. Mount L-brackets onto top and bottom of housingwith screws positioned in center of slots.3. Insert cross brackets through L-brackets.4. Position fixture so the back of the finishing ringextends past the studs the thickness of the wallboard.5. Level fixture and hammer tabs on cross bracketsinto studs. Nail brackets securely to studs.6. Fine adjust fixture position and tighten any loosescrews.7. Remove the 1/2” NPT plugs from the sides/bottomof the housing and pull the supply wire throughinto the housing.8. Remove finishing ring by removing flathead screws.9. Install wallboard.10. Replace finishing ring.11. Install thermal protector (attached to electrical chassis).TemplateHoleFlagFastener1/2"-14 NPTPlugDetachable WiringCompartment4" Mini RoundSteplyte ShownMounting Screws& Screw HolesThermalProtector(Mounted frominside housing)Installation for existing stud wall(Use Accessory Kit #MAKES)1. Using the supplied template, cut a level hole throughthe existing wall between studs. (Failure to levelhole will cause fixture to have tilted appearance.)2. Push the mounting screws through the housingholes and into rear channels. (Note: a thinmembrane covers the housing holes and mayrequire forcing the screws through by tappingthem lightly with a hammer.)3. Place flags flat on rear of housing. Thread screwsinto and through the flags.4. Remove the 1/2” NPT plugs from the sides/bottomof the housing and pull the supply wire through intothe housing. (Through wiring not recommended.)5. Remove wiring compartment screw and wiringcompartment from housing.6. Push housing into the hole in the wall.7. Tighten the mounting screws until the flag fastenersare drawn tight against the inner surface of the wall.8. Replace wiring compartment in its original positionand replace screw.9. Install thermal protector (attached to electrical chassis).Mounting ng screw Holelocations (2 places)Finishing Ring Mount4" Mini Roundsteplyte showntemplatetwo Washers& 8-32 X 2"long screwsoRFlush MountInstallation for Concrete Pour(Hardware included with each fixture)1. Level supplied template on wood support frame and drill 3/16” diameter clearanceholes as marked.2. Remove the 1/2” NPT plugs from the sides/bottom of the housing.3. Install plastic protective shield (if supplied) into housing.4. Pull the supply wire through into the housing. (Through wiring not recommended.)Be sure all unused electrical plugs are replaced. Finishing ring may be removednow and replaced after concrete pour.5. Secure housing to wood support with screws supplied in hardware packet.6. Pour concrete.7. If finishing ring was removed, replace it and tighten flathead screws.If screws are not tight, fixture may leak.4" Round steplyte shownscrew, Washer,and BracketMorterBracketHolesFinishing Ringextends PastBlockInstallation for masonry(Use Accessory Kit #MAKM)1. Install screw through washer and lower masonrybrackets and into tapped housing hole on bottomof fixture.2. Remove the 1/2” NPT plugs from the sides/bottomof the housing and pull the supply wire throughinto the housing.3. Press fixture and lower masonry brackets intolayer of mortar so that mortar comes throughthe holes of the brackets.4. After laying another course of blocks, install thetwo upper masonry brackets onto the housingas in Step 1.63

Low Voltagecross BracketsFour (4)l-Brackets1/2-14 nPt Plugone (1) on sidetwo (2) on Bottomcross Bracket slot(nails supppliedby customer)Bricklyte shownFour (4) Finishing Ring& screw locationsWall BoardthicknessstudFine Adjustmentslotthermal Protector(Mounted fromInside Housing)Installation for new stud wall(Use Accessory Kit #MAKNS)1. Using the supplied template, cut a level hole throughthe existing wall between studs. (Failure to levelhole will cause fixture to have tilted appearance.)2. Mount L-brackets onto top and bottom of housingwith screws positioned in center of slots.3. Insert cross brackets through L-brackets.4. Position fixture so the back of the finishing ringextends past the studs the thickness of the wallboard.5. Level fixture and hammer tabs on cross bracketsinto studs. Nail brackets securely to studs.6. Fine adjust fixture position and tighten anyloose screws.7. Remove the 1/2” NPT plugs from the sides/bottomof the housing and pull the supply wire through intothe housing. (Through wiring not recommended.)8. Remove finishing ring by removing flathead screws.9. Install wallboard.10. Replace finishing ring.11. Install thermal protector (attached to electricalchassis).1/2-14 nPt Plugone (1) on sidetwo (2) on Bottomtemplate Holetwo (2)Flag FastenersBricklyte shownMounting screws& screw Holesthermal Protector(Mounted fromInside Housing)Installation for existing stud wall(Use Accessory Kit #MAKES)1. Using the supplied template, cut a level holethrough the existing wall between studs.(Failure to level hole will cause fixture to havetilted appearance.)2. Push the four (4) mounting screws throughthe housing holes and into rear channels.(Note: a thin membrane covers the housingholes and may require forcing the screwsthrough by tapping them lightly with a hammer.)3. Place flags flat on rear of housing. Threadscrews into and through the flags.4. Remove the 1/2” NPT plugs from thesides/bottom of the housing and pull thesupply wire through into the housing.5. Push housing into the hole in the wall.6. Tighten the mounting screws until the flagfasteners are drawn tight against the innersurface of the wall.7. Install thermal protector (attached toelectrical chassis).1/2-14 nPt Plugsone (1) on each sidetwo (2) on FixtureBottomFinishing Ringand screwlocationsWire compartmentcoverMounting screw Holelocations (Four (4) places)Finishing Ring MountoRtemplateBricklyteshownFour (4) Washers& 8-32 X 2"long screwsFlush MountInstallation for Concrete Pour(Hardware included with each fixture)1. Level supplied template on wood support frame and drill four (4) 3/16” diameterclearance holes as marked.2. Remove the 1/2” NPT plugs from the sides/bottom of the housing and pullthe supply wire through into the housing.3. Install plastic protective shield (if supplied) into housing and make sure all unusedelectrical plugs are replaced.4. Finishing ring may be removed now and replaced after concrete pour.5. Secure housing to wood support with screws supplied in hardware packet.6. Pour concrete.7. If finishing ring was removed, replace it and tighten flathead screws.If screws are not tight, fixture may leak.1/2-14 nPt Plugone (1) on sidetwo (2) on BottomlowerMasonryBracketscrew,Washer,BracketBricklyte shownFinishing Ringextends Past BrickMortarBracketHolesInstallation for masonry(Use Accessory Kit #MAKM)1. Install screw through washer and lower masonrybrackets and into tapped housing hole on bottomof fixture.2. Remove the 1/2” NPT plugs from the sides/bottomof the housing and pull the supply wire throughinto the housing.3. Press fixture and lower masonry brackets intolayer of mortar so that mortar comes throughthe holes of the brackets.4. After laying another course of blocks, install thetwo upper masonry brackets onto the housingas in Step 1.64

Low VoltageWalkway Lighting

Perhaps as important as the destination: the lights that show the way.From spun solid copper that patinas with age to minimalist cast bronze,from Art Nouveau to Arts and Crafts, our pathlytes harmonizewith a broad range of architectural styles.If you’re not sure about the ideal placement, our easy-to-understandrecommended spacing diagrams make it easy to decide.As for which style to pick … it all depends where the path leads you.

pathlytesCUL2 CopperCUL2 Copper• 12 Volt• 1/2” NPS fitter• 20 watt maximum • Includes stem• T3 Lamp (included)Housing – Spun solid copper roof withsolid copper stem. Machined copper threadedadapter for tool-less relamping.Finish – Natural copper will patina with age.Reflective white powdercoat on underside of roof.Lens – Clear borosilicate glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.CUL3 CopperCUL3 Copper• 12 Volt• 1/2” NPS fitter• 20 watt maximum • Includes stem• T3 Lamp (included)Housing – Spun solid copper roof with 180°glare shield and solid copper stem. Machinedcopper threaded adapter for tool-less relamping.Finish – Natural copper will patina with age.Reflective white powdercoat on underside ofroof and inside of glare shield.Lens – Clear borosilicate glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.CUL4 CopperCUL4 Copper• 12 Volt• 1/2” NPS fitter• 20 watt maximum • Includes stem• T3 Lamp (included)Housing – Spun solid copper roof rolled underfor strength with solid copper stem. Machinedbrass threaded adapter for tool-less relamping.Finish – Natural copper will patina with age.Reflective white powdercoat on underside of roof.Lens – Frosted borosilicate glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - CUL2 - 15’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 6.46 3.03 1.57 .81 .61 .54 .45 .41 .323-1/2"[89mm]Recommended Spacing - CUL3 - 12’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 3.10 1.70 1.20 .85 .62 .49 .39 .36 .302-1/2"[64mm]Recommended Spacing - CUL4 - 11’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 10.23 4.55 1.52 1.19 .87 .20 .09 - -22-1/2"[572mm]23-1/8"[587mm]4"[102mm]11-9/16"[294mm]67

CUL6 CopperCUL6 Copper• 12 Volt• 1/2” NPS fitter• 20 watt maximum • Includes stem• T3 Lamp (included)Housing – Spun solid copper roof rolled underfor strength with solid copper stem. Machinedbrass threaded adapter for tool-less relamping.Finish – Natural copper will patina with age.Reflective white powdercoat on underside of roof.Lens – Frosted borosilicate glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.CUL7 CopperCUL7 Copper• 12 Volt• 1/2” NPS fitter• 20 watt maximum • Includes stem• T3 Lamp (included)Housing – Spun solid copper roof with solidcopper stem. Machined copper threaded adapterfor tool-less relamping.Finish – Natural copper will patina with age.Reflective white powdercoat on underside of roof.Lens – Clear borosilicate glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.CUL9 CopperCUL9 Copper• 12 Volt• 1/2” NPS fitter• 20 watt maximum • Includes stem• T3 Lamp (included)Housing – Spun solid copper roof with solidcopper stem. Machined copper threaded adapterfor tool-less relamping.Finish – Natural copper will patina with age.Reflective white powdercoat on underside of roof.Lens – Clear borosilicate glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - CUL6 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 9.89 5.32 2.12 1.20 .98 .52 .33 .10 -Recommended Spacing - CUL7 - 15’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 9.15 4.30 2.03 1.00 .48 .26 .18 .16 .136"[152mm]Recommended Spacing - CUL9 - 20’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 9.46 4.55 2.13 1.13 .83 .74 .64 .59 .4611"[279mm]6"[152mm]16-1/4"[413mm]23-1/8"[587mm]23-1/2"[567mm]68

pathlytesCUL10 CopperCUL10 Copper• 12 Volt• 1/2” NPS fitter• 20 watt maximum • Includes stem• T3 Lamp (included)Housing – Spun solid copper roof rolledunder for strength with solid copper stem.Machined brass threaded adapter fortool-less relamping.Finish – Natural copper will patina with age.Reflective white powdercoat on undersideof roof.Lens – Frosted borosilicate glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.GAL3 CopperGAL3-AC Hand-Crafted Copper• 12 Volt• 12 watt maximum• 10 watt Xenon lamp (included)• 1/2” NPS fitterHousing – Solid copper square extrusionwith solid copper end and brass fitter.Finish – Natural copper will patina with age.Socket – Wedge base, hinged for re-lamping.Reflector – Stainless steel.Wiring – Pre-wired with a 3-ft pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.GAL3-SS Stainless SteelGAL3-SS Stainless Steel• 12 Volt• 12 watt maximum• 10 watt Xenon lamp (included)• 1/2” NPS fitterHousing – Stainless steel square extrusionwith stainless steel end and stainless steel fitter.Finish – Stainless steel. Brushed matte finish.Socket – Wedge base, hinged for re-lamping.Reflector – Stainless steel brushedmatte finish.Wiring – Pre-wired with a 3-ft pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - CUL10 - 12’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 8.25 6.50 3.24 2.01 1.19 .95 .61 .24 .08Recommended Spacing - GAL3-6’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 10W Xenon 2.17 1.07 .54 .29 .12 - - - -Recommended Spacing - GAL3-6’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 10W Xenon 2.17 1.07 .54 .29 .12 - - - -9"[229mm]6-1/8"[156mm]1"[25mm]6-1/8"[156mm]1"[25mm]21-5/16"[541mm]22-3/8"[568mm]22-3/8"[568mm]69

GAML1 CopperGAML1-AC Hand-Crafted Copper• 12 Volt• 10 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Hand-formed solid copper,mushrooms have unique individual tops.Finish – Natural copper with hand-appliedoxide coating will age to a fine patina.Lens – Frosted tempered glass sprinkler shield.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.GAML2 CopperGAML2-AC Hand-Crafted Copper• 12 Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Hand-formed solid copper,mushrooms have unique individual tops.Finish – Natural copper with hand-appliedoxide coating will age to a fine patina.Lens – Frosted tempered glass sprinkler shield.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and aquick connector for easy hookup to the supplycable.ETL, cETL Listed.GAML3 CopperGAML3-AC Hand-Crafted Copper• 12 Volt• 10 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Hand-formed solid copperand copper tubing. Mushrooms have uniqueindividual tops. (Large mushroom is the onlyone that illuminates.)Finish – Natural copper with hand-appliedoxide coating will age naturally to a fine patina.Lens – Frosted tempered glass sprinkler shield.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - GAML1-AC- 8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 10W T3 4.54 1.49 .49 .23 .13 - - - -Recommended Spacing - GAML2-AC - 12’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 2.34 1.12 1.1 .55 .32 .18 .11 .05 -Recommended Spacing - GAML3-AC - 8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 2.34 1.12 1.1 .55 .32 .18 .11 .05 -12-1/2"[318mm]9"[229mm]17-1/8"[435mm]11"[279mm]14-1/2"[368mm]9"[229mm]70

pathlytesGAML4 CopperGAML4-AC Hand-Crafted Copper• 12 Volt• 10 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Hammered copper roofwith hemmed edge and copper stem.Finish – Natural copper with a hand-appliedoxide coating will age naturally to a fine patina.Lens – Frosted tempered glass sprinkler shield.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.GAML5 CopperGAML5-AC Hand-Crafted Copper• 12 Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Hammered copper roofwith hemmed edge and copper stem.Finish – Natural copper with a hand-appliedoxide coating will age naturally to a fine patina.Lens – Frosted tempered glass sprinkler shield.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - GAML4-AC - 8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 10W T3 4.25 1.35 .50 .25 .11 - - - -Recommended Spacing - GAML5-AC - 12’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 2.40 1.33 1.07 .57 .35 .15 .05 - -9-1/16"[230mm]11-7/8"[302mm]5-1/2"[140mm]17-1/8"[435mm]71

pathlytesGAGL1 CopperGAGL1-AC Hand-Crafted Copper• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – Hand-formed solid copperand copper tubing with individually shaped leaves.Finish – Natural copper with hand-appliedoxide coating will age naturally to a fine patina.Glass – Hand-blown amber glass shades withgreen accent.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.GATL1 CopperGATL1-AC Hand-Crafted Copper• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – Hand-formed solid copperand copper tubing with individually shaped leaves.Finish – Natural copper with hand-appliedoxide coating will age naturally to a fine patina.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.EPL1 BrassEPL1-N Natural Brass• 12 Volt• 10 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast brass with brass stemand screws. Includes 30º flood aluminum reflector.Finish – Natural brass.Lens – Clear tempered glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - GAGL1-AC - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 10.7 1.05 .42 .2 .1 .06 .04 .02 -9-9/16"[243mm]Recommended Spacing - GATL1-AC - 14’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 9.96 3.93 1.54 .71 .39 .24 .16 .11 -9-9/16"[243mm]Recommended Spacing - EPL1 - 8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 15.29 6.51 3.4 2.59 .68 .39 .21 - -7-11/16"[195mm]25-1/16"[636mm]25-1/16"[636mm] 24-5/16"[618mm]73

EL2 BrassEL2-N Natural Brass• 12 Volt• 10 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast brass with fully-adjustablebrass yoke-mounted arm, brass stem and screws.Includes 30º flood aluminum reflector.Finish – Natural brass.Lens – Clear tempered glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - EL2 - 8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 15.29 6.51 3.4 2.59 .68 .39 .21 - -2-15/16"[75mm]2-5/8"[67mm]SPL4 BrassSPL4-N Natural Brass• 12 Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast brass top, brass stemand spun brass shade. (Natural brass fixturehas spun stainless steel shade.) Lens and shadeassembly is twist-lock for tool-less relamping.Finish – Natural brass with stainless steel shade.Lens – Frosted tempered glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - SPL4 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 1.42 5.29 2.4 1.3 .74 .29 .17 - -7-9/16"[192mm]SPL5 BrassSPL5-N Natural Brass• 12 Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast brass top, brass stemand glass guard with spun brass shade. (Naturalbrass fixture has natural spun copper shade.)Lens and shade assembly is twist-lockfor tool-less relamping.Finish – Natural brass with naturalcopper shade.Lens – Frosted tempered glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - SPL5 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 11.67 4.97 2.34 .86 .35 .19 .09 - -7-7/8"[200mm]20-11/16"[525mm]20-7/16"[519mm]24-3/4"[629mm]24-3/4"[629mm]74

pathlytesMUL4 AluminumMUL4-A BlackMUL4-H BronzeMUL4-G VerdeMUL4-U Sienna• 12 Volt• T3 Lamp (included) • 20 watt maximumHousing – Cast aluminum • 1/2” with NPS stainless fittersteelhinges and spring latch providing tool-less entry.Finish – Black, bronze, hand-rubbed verdeantiqued over black thermoset powdercoat,speckled stone or sienna thermoset powdercoat.Lens – Frosted, tempered glass sprinkler shieldwith molded silicone gaskets.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.MUL4 BRASSMUL4-N Natural BrassMUL4-OB Oiled Brass• 12 Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast brass with stainless steelhinges and spring latch, providing tool-less entry.Finish – Natural brass or oiled brass.Lens – Frosted, tempered glass sprinkler shieldwith molded silicone gaskets.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.MUL5 AluminumMUL5-A Black MUL5-G VerdeMUL5-H Bronze MUL5-T Speckled StoneMUL5-U Sienna• 12 Volt• T3 Lamp (included)• 35 watt maximum• 1/2” NPS fitterHousing – Cast aluminum with stainless steelhinges and spring latch providing tool-less entry.Finish – Black, bronze, hand-rubbed verdeantiqued over black thermoset powdercoat,speckled stone or sienna thermoset powdercoat.Lens – Frosted, tempered glass sprinkler shieldwith molded silicone gaskets.Socket – Bi-pin (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - MUL4 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 9.62 1.52 .46 .17 .10 .05 .03 - -5-1/16"[129mm]Recommended Spacing - MUL4 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 9.62 1.52 .46 .17 .10 .05 .03 - -5-1/16"[129mm]Recommended Spacing - MUL5 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 35W T3 9.62 1.52 .46 .17 .10 .05 .03 - -9"[229mm]19-1/2"[495mm]19-1/2"[495mm]25"[635mm]See page 21for LED models.75

MUL5 BrassMUL5-N Natural BrassMUL5-OB Oiled Brass• 12 Volt• 35 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast brass with stainless steelhinges and spring latch, providing tool-less entry.Finish – Natural brass or oiled brass.Lens – Frosted, tempered glass sprinkler shieldwith molded silicone gaskets.Socket – Bi-pin (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - MUL5 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 35W T3 9.62 1.52 .46 .17 .10 .05 .03 - -9"[229mm]AL4 ALUMINUMAL4-G Verde AL4-OM Old Marble• 12Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast aluminum with stainlesssteel hinges and spring latch, providing tool-less entry.Finish – Verde is hand-rubbed over blackthermoset powdercoat, old marble is hand appliedover dark red thermoset powdercoat.Lens – Frosted, tempered glass sprinkler shieldwith molded silicone gaskets.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - AL4 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 9.12 1.68 .55 .20 .11 .07 - - -7-1/4"[183mm]AL41 ALUMINUMAL41-G VerdeAL41-OM Old Marble• 12Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast aluminum with stainless steelhinges and spring latch, providing tool-less entry.Finish – Verde is hand-rubbed over blackthermoset powdercoat, old marble is hand appliedover dark red thermoset powdercoat.Finial – Clear seeded glass finial sparkleswhen illuminated.Lens – Frosted, tempered glass sprinkler shieldwith molded silicone gaskets.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - AL41 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 9.1.2 1.68 .55 .20 .11 .07 - - -7-1/4"[183mm]25"[635mm]20-3/8"[518mm]20-3/8"[518mm]See page 21for LED models.See page 21for LED models.76

pathlytesTRL4 ALUMINUMTRL4-G VerdeTRL4-T Speckled StoneTRL4-U Sienna• 12 Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast aluminum with stainlesssteel hinges and spring latch, providing tool-less entry.Finish – Hand-rubbed verde antiqued overblack thermoset powdercoat, speckled stone,or sienna thermoset powdercoat.LENS – Frosted tempered glass sprinkler shieldwith molded silicone gaskets.Socket – Bi-pin type (G-4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - TRL4 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 9.62 1.52 .46 .17 .10 .05 .03 - -8-5/16"[211mm]TRL5 ALUMINUMTRL5-G Verde• 12 Volt• 35 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast aluminum with stainlesssteel hinges and spring latch, providing tool-less entry.Finish – Hand-rubbed verde antiqued overblack thermoset powdercoat.LENS – Frosted tempered glass sprinkler shieldwith molded silicone gaskets.Socket – Bi-pin type (G-4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - TRL5 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 35W T3 9.62 1.52 .46 .17 .10 .05 .03 - -9-7/8"[251mm]MSL12 AluminumMSL12-A Black MSL12-G VerdeMSL12-H Bronze• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – Cast aluminum with hiddenfasteners and aluminum stem.Finish – Black, hand-rubbed verde antiquedover black thermoset powdercoat, or bronzethermoset powdercoat.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - MSL12 - 8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 26.0 4.7 1.2 .3 - - - - -23-7/16"[597mm]28-1/8"[715mm]13-1/2"[343mm]4-1/2"[114mm]See page 19for LED models.77

MSL18 AluminumMSL18-A BlackMSL18-H BronzeMSL18-G Verde• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – Cast aluminum with hiddenfasteners and aluminum stem.Finish – Black, hand-rubbed verde antiquedover black thermoset powdercoat, or bronzethermoset powdercoat.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - MSL18 - 9’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 5.4 1.5 .3 .15 .08 .03 - - -CPL12 AluminumCPL12-A Black CPL12-H BronzeCPL12-T Speckled Stone• 12 Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast aluminum with twist-locktop for tool-less relamping. Built-in segmentedreflector casts a high-angle distribution.Finish – Black, bronze or speckled stonethermoset powdercoat.Lens – Clear tempered glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - CPL12 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 12.5 4.89 3.58 1.90 .27 .15 .07 - -CPL21 AluminumCPL21-A BlackCPL21-T Speckled StoneCPL21-H Bronze• 12 Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Die-cast aluminum with twist-locktop for tool-less relamping. Built-in segmentedreflector casts a high-angle distribution.Finish – Black, bronze or speckled stonethermoset powdercoat.Lens – Clear tempered glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - CPL21 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 12.5 4.89 3.58 1.90 .27 .15 .07 - -4-1/2"[114mm]4-3/4"[121mm]4-3/4"[121mm]19-1/2"[495mm]20"[508mm]21"[533mm]See page 21for LED models.78

pathlytesSPL1 AluminumSPL1-A BlackSPL1-G Verde• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – Single-piece cast aluminumwith aluminum stem included.Finish – Black or hand-rubbed verde over blackthermoset powdercoat.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.SPL18 AluminumSPL18-A Black SPL18-G Verde• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – Single-piece cast aluminumwith aluminum stem included.Finish – Black or hand-rubbed verde over blackthermoset powdercoat.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - SPL1 - 15’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 5.0 2.6 1.9 1.5 1.2 .5 .3 .1 -Recommended Spacing - SPL18 - 13’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 20.7 5.6 1.8 .7 .4 .25 .1 .05 -6-5/8"[168mm]6-5/8"[168mm]31"[787mm]18"[457mm]79

TUL1 AluminumTUL1-G Verde• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – One-piece cast aluminumwith aluminum stem.Finish – Hand-rubbed verde antiqued over blackthermoset powdercoat.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.TUL1 Cast BronzeTUL1-N Natural Cast Bronze• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – One-piece cast bronzewith brass stem.Finish – Natural cast bronze to age over time.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - TUL1 - 8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 8.7 2.7 .9 .3 .05 - - - -Recommended Spacing - TUL1 - 8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 8.7 2.7 .9 .3 .05 - - - -7-3/8"[188mm]7-3/8"[188mm]22-1/16"[560mm]4-5/8"[117mm]22-1/16"[560mm]4-5/8"[117mm]80

pathlytesTUL3 AluminumTUL3-G Verde• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – One-piece cast aluminumwith aluminum stem.Finish – Hand-rubbed verde antiqued over blackthermoset powdercoat.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.UL, cUL Listed.FUL1 AluminumFUL1-G Verde• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – One-piece cast aluminumwith aluminum stem.Finish – Hand-rubbed verde antiqued over blackthermoset powdercoat.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.UL, cUL Listed.Recommended Spacing - TUL3 - 11’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 12.8 5.4 2.3 1.6 .9 .4 0.8 - -Recommended Spacing - FUL1 - 12’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 9.1 3.2 1.3 .8 .4 .25 - - -10-5/16"[262mm]8-1/4"[209mm]36"[915mm]7-1/4"[183mm]21-1/2"[544mm]4"[101mm]24"[610mm]81

TL19 AluminumTL19-G Verde• 12 Volt• 20 watt maximum• Xenon Lamp (included) • 1/2” NPS fitter• Stem not included, order separatelyHousing – Cast aluminum construction.Finish – Hand-rubbed verde antiqued overblack thermoset powdercoat.Socket – Wedge base.Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.TL39 AluminumTL39-G Verde• 12 Volt• 20 watt maximum• Xenon Lamp (included) • 1/2” NPS fitter• Stem not included, order separatelyHousing – Cast aluminum construction.Finish – Hand-rubbed verde antiqued overblack thermoset powdercoat.Socket – Wedge base.Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Optional StemsCatalog No. Finish DescriptionS12 (Specify) * Stem-12”, 1/2” NPSS24 (Specify) * Stem-24”, 1/2” NPSS36 (Specify) * Stem-36”, 1/2” NPS*Specify Finishes: G- Verde (shown)Optional StemsCatalog No. Finish DescriptionS12 (Specify) * Stem-12”, 1/2” NPSS24 (Specify) * Stem-24”, 1/2” NPSS36 (Specify) * Stem-36”, 1/2” NPS*Specify Finishes: G- Verde (shown)Recommended Spacing - TL19 - 8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 7.1 2.7 1.0 .4 .2 .08 - - -Recommended Spacing - TL39 - 8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 7.2 1.8 .4 .18 .05 - - - -5-7/8"[150mm]12"[305mm]7-5/16"[185mm]8-1/4"[209mm]13-3/4"[349mm]11-3/16"[284mm]82

pathlytesAL42 AluminumAL42-G VerdeAL42-T Speckled StoneAL42-U Sienna• 12 Volt• 20 watt maximum• T3 Lamp (included) • 1/2” NPS fitter• Stem not included, order separatelyHousing – Cast aluminum construction.Removable roof for easy relamping.Finish – Hand-rubbed verde antiqued overblack thermoset powdercoat, speckled stoneor sienna thermoset powdercoat.Lens – Opalescent glass panels.Socket – Bi-pin type (G4)Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Optional StemsCatalog No. Finish DescriptionS12 (Specify) * Stem-12”, 1/2” NPSS24 (Specify) * Stem-24”, 1/2” NPSS36 (Specify) * Stem-36”, 1/2” NPS*Specify Finishes: G-Verde (shown), T-Speckled Stone, U-SiennaRecommended Spacing - AL42 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 3.1 2.4 1.3 .7 .25 .05 - - -12"[305mm]AL43 AluminumAL43-G Verde AL43-T Speckled StoneAL43-U Sienna• 12 Volt• 20 watt maximum• T3 Lamp (included) • 1/2” NPS fitter• Stem not included, order separatelyHousing – Cast aluminum construction.Removable roof for easy relamping.Finish – Hand-rubbed verde antiqued over blackthermoset powdercoat, speckled stone or siennathermoset powdercoat.Lens – Opalescent glass panels.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Optional StemsCatalog No. Finish DescriptionS12 (Specify) * Stem-12”, 1/2” NPS.S24 (Specify) * Stem-24”, 1/2” NPSS36 (Specify) * Stem-36”, 1/2” NPS*Specify Finishes: G-Verde (shown), T-Speckled Stone, U-SiennaRecommended Spacing - AL43 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 3.1 2.4 1.3 .7 .25 .05 - - -7-3/8"[187mm]12-7/16"[315mm]11-1/4"[286mm]7-3/8"[187mm]83

RL4 AluminumRL4-A BlackRL4-T Speckled StoneRL4-G VerdeRL4-U Sienna• 12 Volt• 20 watt maximum• T3 Lamp (included)• 1/2” NPS fitterHousing – Cast aluminum construction.Finish – Black, hand-rubbed verde antiquedover black thermoset powdercoat, speckled stoneor sienna thermoset powdercoat.Lens – Frosted glass.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.RL3 AluminumRL3-G Verde• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – Cast aluminum construction.Finish – Hand-rubbed verde antiqued overblack thermoset powdercoat.Lens – Painted glass jar with clear glass top.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - RL4 - 8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 3.0 1.0 .5 .1 .05 - - - -10"[253mm]Recommended Spacing - RL3 - 8’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 7.2 1.8 .4 .18 .05 - - - -9-1/8"[232mm]17-1/4"[435mm]18"[457mm]See page 21for LED models.84

pathlytes/beaconsPL3 AluminumPL3-G Verde• 12 Volt• 27 watt maximum• 1156 Lamp (included)• 1/2” NPS fitterHousing – Cast aluminum construction.Finish – Hand-rubbed verde antiquedover black thermoset powdercoat.Lens – Painted, molded glass with clear top.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - PL3 - 7’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 3.0 1.0 .5 .1 - - - - -6"[152mm]PL39 AluminumPL39-K Garden Green• 12 Volt• 27 watt maximum• 1156 Lamp (included) • 1/2” NPS fitter• Stem not included, order separatelyHousing – Cast aluminum construction.Finish – Garden green thermoset powdercoat.Lens – Clear molded glass.Socket – Single contact bayonet (S-8).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Optional StemsCatalog No. Finish DescriptionS12 K-Garden Green Stem-12”, 1/2” NPSS24 K-Garden Green Stem-24”, 1/2” NPSS36 K-Garden Green Stem-36”, 1/2” NPSRecommended Spacing - PL39 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 27W 1156 2.8 3.6 1.1 .5 .2 .1 - - -6"[152mm]18-1/2"[470mm]7"[178mm]85

DWL1 Cast BronzeDWL1-N Natural Cast Bronze• 12 Volt• 20 watt maximum• T3 Halogen lamp (included)Housing – Constructed of cast bronze,which offers superior strength and durability.Recessed housing is compressionmolded composite.Finish – Natural bronze.Lens – Borosilicate frosted glass lens,fully gasketed top and bottom.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.DWCL1 CompositeDWCL1-A Black• 12 Volt• 20 watt maximum• T3 Halogen lamp (included)Housing – Injection molded polyestercomposite resin.Finish – Color impregnated black.Lens – Borosilicate glass lens, fullygasketed top and bottom.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.DWCL2 CompositeDWCL2-A Black• 12 Volt• 20 watt maximum• T3 Halogen lamp (included)Housing – Injection molded polyestercomposite resin.Finish – Color impregnated black.Lens – Ribbed clear acrylic, fully gasketed.Socket – Bi-pin type (G4).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.Recommended Spacing - DWL1 - 15’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’1 2V, 20W T3 13.35 3.94 1.42 .90 .56 .37 .24 .17 -Recommended Spacing - DWCL1 - 15’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 13.35 3.94 1.42 .90 .56 .37 .24 .17 -Recommended Spacing - DWCL2 - 13’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’12V, 20W T3 10.67 2.73 1.17 .65 .36 .22 .07 .02 -5"5"[127mm] [127mm]1-3/4" 5-5/16"[45mm] [135mm]8-3/4"[222mm]3-5/8"[92mm]8-3/4"[222mm]3-5/8"[92mm]7-3/8"[188mm]3-7/8"[99mm]86

Low VoltageUnderwater Lighting

Liquid luminescence. Enchanting dimension. Water featuresbring elemental beauty to almost any environment.Our underwater lights illuminate water features safely and strikingly.And our selection of colored lenses gives you the freedom to exploreeven more dramatic effects.From pond to fountain to waterfall, the glow of underwater lightingmakes every breeze – every ripple – a detail remembered.

UNDERWATERUWL1 CompositeUWL1-A Black• 12 Volt• 20 watt maximum• T3 Lamp (10 watt included)Housing – Molded Lexan ® composite,internally weighted.Finish – Color impregnated black.Lens – Molded prismatic acrylic with optionalreflector to block uplight.Socket – Bi-pin (G4).Wiring – 10-ft. SVO cord for hard wiringto low voltage supply cable.NOTE: Underwater fixtures are not for use inswimming pools or spas due to exposed wiring.ETL, cETL Listed.UWUL516 CompositeUWUL516-H Bronze• 12 Volt• 35 watt maximum• MR16 LampHousing – Injection molded fiberglassreinforced ULTEM ® High Performance Polymer.lens ring – Single-peice ingection moldedULTEM ® High Performance Polymer with gasketedlens. Twist-off operation for ease of maintenance.Base – Weighted concrete with swivel to allowup to 90° aiming.Finish – Color impregnated bronze.Lens – Tempered clear glass with high impactpolycarbonate clear lens guard.Socket – Bi-pin (GU5.3).Wiring – 10-ft. STWA cord for hard wiringto low voltage supply cable.NOTE: Underwater fixtures are not for use inswimming pools or spas due to exposed wiring.ETL, cETL Listed.catalog no.IBL16descriptionIce Blue Lens4-1/16"[103mm]5"[127mm]6-11/16"[170mm]3"[76mm]5-1/8"[130mm]See page 21for LED models.89

UWL1075/UWL1100Cast BronzeUWL1075-N Natural Cast BronzeUWL1100-N Natural Cast Bronze• 12 Volt• 100 watt maximum• UWL1075: 75W MR16 Lamp (Included)• UWL1100: 100W T3 Lamp (Included)Housing – Cast nickel bronze guard, spunstainless steel housing, stainless steel fasteners.Base – Cast nickel bronze swivel base.Finish – Natural finish.Lens – Tempered clear convex glass(see below for optional colored lenses).Socket – Bi-Pin (GY6.5).Wiring – 10-ft. SVO cord for hard wiringto low voltage supply cable.Note: Underwater fixtures are not for use inswimming pools or spas due to exposed wiring.ETL, cETL Listed.UWL2075/UWL2100Cast BronzeUWL2075-N Natural Cast BronzeUWL2100-N Natural Cast Bronze• 12 Volt• 100 watt maximum• UWL2075: 75W MR16 Lamp (Included)• UWL2100: 100W T3 Lamp (Included)Housing – Cast nickel bronze guard, spunstainless steel housing, stainless steel fasteners.Niche – Stainless steel with cast nickel bronze trim.Finish – Natural finish.Lens – Tempered clear convex glass(see below for optional colored lenses).Socket – Bi-Pin (GY6.5).Wiring – 10-ft. SVO cord for hard wiringto low voltage supply cable.Note: Underwater fixtures are not for use inswimming pools or spas due to exposed wiring.ETL, cETL Listed.catalog no. descriptioncatalog no. descriptioncatalog no. descriptioncatalog no. descriptionUWBLU Blue LensUWGRN Green LensUWBLU Blue LensUWGRN Green LensUWRED Red LensUWAMB Amber LensUWRED Red LensUWAMB Amber Lens7-7/16"[189mm]6"[152mm]25ºMax. AimingAngle (AnyDirection)5-1/2"[140mm]5-1/8"[130mm]90

UNDERWATER AccessoriesJBH1 Junction BoxTwo (2) lights, 10.5 cubic inches. Single 3/4” NPTbottom. Two (2) 1/2” or 3/4”, one (1) each end.Please specify factory-machined conduit entrywaysupon ordering.1-1/4"[32mm]NTOPVIEWJBH2 Junction BoxFour (4) lights, 21.3 cubic inches. Two (2) 1” max.NPT bottom. Four (4) 1/2” or 3/4”, one (1)each end.Please specify factory-machined conduit entrywaysupon ordering.1-3/8"[35mm]NTOPVIEWSJBH10 Junction BoxTwo (2) lights, 21 cubic inches. Single 3/4” NPTbottom. Two (2) 1/2” or 3/4”, one (1) each end.Please specify factory-machined conduit entrywaysupon ordering.2-1/32"[52mm]NTOPVIEWWE2"[51mm]WEWE3-3/8"[86mm]4-3/8"[111mm]S2-15/16"[75mm]4-3/8"[111mm]4-3/4"[121mm]4-3/4"[121mm]S3-1/2"[90mm]4-3/4"[121mm]3-7/8"[98mm]4-7/8"[124mm]S3-1/4"[82mm]4-7/8"[124mm]CCH50Machined Naval Brass Cord Seal-Neoprenepacking seal, brass friction ring. 1/2” NPT for usewith 16-3 STO-WA entry into junction box.CCH50FStrain Relief, Machined Naval Brass CordSeal-Neoprene packing seal, brass friction ring.1/2” NPTx 16-3 cord.MA1Re-enterable encapsulant for inground installations.Two-part field mixable material in one convenientpackage. Boxed six (6) per carton.91

Fixtures are intended for use in water gardens, fountains or ponds and not for use in swimming pool applications.Underwater lighting techniques may include uplighting above-surface water features, or illuminating the water itself.P o n d Ap p l i c a t i o n—Lo w Vo l t a g e1. Remove screw(s) and lens cover and install lamp.2. Replace lens and cover and reinstall screw(s). Be certain that gasket area is wiped cleanand is free of any debris and that screws are tightly fastened (do not overtighten).3. Submerge fixture in water, making sure that the end of the 10-ft. SVO cord is not submerged.Fixture must be submerged a minimum of 2” below the water surface.4. Connect dry end of SVO cord to cable run, using silicone-filled wire nuts (MA22 or similar).5. Power supply (transformer) must be mounted in accordance to NEC specifications.6. Do not allow the underwater fixture to freeze as this may cause fixture failure.Transformer12"Min.GFCIOutlet10'Connection10' Min.92

Low VoltageSpecialty Lighting

A range of innovative specialty lighting products: from a decorative copper sunto rocklytes, barbecue lights, and patiolytes.Let your imagination wander with our selection of specialty fixtures,each with its own special function and flourish.

RockLytes/Decorative/PatiolyteRL116 RockLyteRL116-I Granite• 12 Volt• 50 watt maximum• MR16 LampHousing – Constructed of fiberglass reinforcedmolded concrete and cast aluminum lamp housingwith non-ferrous fasteners.Finish – Natural granite.Lens – Clear tempered glass.Socket – Bi-pin type (GU5.3).Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.RL336 RockLyteRL336-I Granite• 12 Volt• 50 watt maximum• PAR36 LampRL336-IL Granite• 12 Volt• 50 watt maximum• PAR36 Lamp (18 watt WFL PAR36included)Housing – Constructed of fiberglass reinforcedmolded concrete and silicone lamp holder.Finish – Natural granite.Socket – Double screw terminal.Wiring – Pre-wired with a 3-ft. pigtail and a quickconnector for easy hookup to the supply cable.ETL, cETL Listed.GASUN CopperGASUN-AC Hand-Crafted Copper• 12 Volt• Two (2) 27 watt maximum• Two (2) 1156 Lamps (included)Housing – Hand-formed solid copperperforated to allow projection of light.Finish – Natural copper will patina with age.Socket – Two (2) single contact bayonets(S-8).Wiring – Pre-wired with a 6-ft. pigtail and quickconnector for easy hookup to the supply cable.ETL, cETL Listed.23-3/4"[603mm]8"[203mm]8-7/8"[225mm]6"[152mm]7"[178mm]95

LL48 STAINLESS STEELThis portable contemporary stainless fixture comes with a 25-ft. cordand integral transformer, and has an adjustable height and a convenientOn/Off switch, ideal for outdoor living spaces.LL48-SS Stainless Steel• 120 Volt with integral inline 12 volt transformer• 20 watt maximum• T3 Lamp (included)• Weighted base mountFixture Head – Spun stainless steel housing with stainless steel shroud.Lens – Clear tempered glass, siliconed into shroud.Gasket – Silicone channel gasket between housing and shroud.Switch – On/Off switch is protected with a weatherproof silicone covering.Finish – Brushed stainless steel finish.Flexible Neck – Stainless steel.Adjustable Stem – Stainless steel tubing adjusts up to 14”.Base – Spun stainless steel cover with concrete-filled composite base.Socket – Bi-pin type (G4).Electrical – 25-ft. insulated low voltage cord with integralwall-mounted electronic transformer with grounded plug.CSA Listed.4-3/4"[121mm]LL20 STAINLESS STEELMount this contemporary stainless fixture directly to a grill or table for perfectaccent lighting. The heavy-duty clamp combined with the streamlined luminaireand flexible arm will insure years of complimentary outdoor illumination.LL20-SS Stainless Steel• 120 Volt with integral inline 12 volt transformer• 20 watt maximum• T3 Lamp (included)• C-clamp mountFixture Head – Spun stainless steel housing with stainless steel shroud.Lens – Clear tempered glass, siliconed into shroud.Gasket – Silicone channel gasket between housing and shroud.Switch – On/Off switch is protected with a weatherproof silicone covering.Finish – Brushed stainless steel finish.Flexible Neck – Stainless steel.Clamp – Chrome-plated zinc with stainless steel bolt. The base of theclamp is removable, allowing the top portion to direct mount to any surface.Socket – Bi-pin type (G4).Electrical – 25-ft. insulated low voltage cord with integralwall-mounted electronic transformer with grounded plug.CSA Listed.4-3/4"[121mm]45-1/8"[1147mm]to59-1/8"[1505mm]3-1/2"[89mm]27-3/16"[691mm]19-1/4"[488mm]3-1/2"[89mm]10-1/16"[255mm]3"[76mm]96

Low VoltageAccessories and Photometrics

Just as important as our vast selection of fixtures, Philips Hadco accessoriesgive you all the options you need to finish the job with confidence.Browse our broad array of transformers and our wide variety of stakes,connectors and mounting canopies. You’ll find the right accessories to implementalmost any installation you can imagine.

TransformersTC_-1515 Volt StandardTransformers• Polyester powdercoated steel case.• Removable, gasketed hinged door.• Weatherproof compartment for plug intime clock (T5 or T6, sold separately).• Plug-in photocell (PC3 or PC15,sold separately).• 1 /2” knockout for photocell mounting.• Four (4) to eight (8) double knockoutsfor 1 /2” or 3/4” conduit.• One (1) 1 -1 /2” conduit inlet.• Hinged bottom plate.• Large wiring compartment.• Large terminal blocks to accommodateup to four (4) #1 0 wires.• Plug-in photo cell outlet.• Plug-in time clock outlet (X10 compatible).• Epoxy encapsulated toroidal transformerwith built-in primary thermal protection.• 12V, 13V, 14V, and 15V output taps.• Magnetic circuit breaker for each 300wsecondary circuit.• 6-ft. grounded cord and plug.• Indoor/Outdoor UL and cUL listed.• Ten-year warranty.TSS_-1515 Volt StainlessSteel Transformers• 304 brushed stainless steel case.• Removable, gasketed hinged door.• Weatherproof compartment for plug intime clock (T5 or T6, sold separately).• Plug-in photocell (PC3 or PC15,sold separately).• 1/2” knockout for photocell mounting.• Four (4) to eight (8) double knockoutsfor 1 /2” or 3/4” conduit.• One (1) 1-1/2” conduit inlet .• Hinged bottom plate.• Large wiring compartment.• Large terminal blocks to accommodateup to four (4) #1 0 wires.• Plug-in photo cell outlet.• Plug-in time clock outlet (X10 compatible).• Epoxy encapsulated toroidal transformerwith built-in primary thermal protection.• 12V, 13V, 14V, and 15V output taps.• Magnetic circuit breaker for each 300wsecondary circuit.• 6-ft. grounded cord and plug.• Indoor/Outdoor UL and cUL listed.• Limited lifetime warranty.TC_-2222 Volt StandardTransformers• Polyester powdercoated steel case.• Removable door.• Weatherproof compartment for plug in timeclock (T5 or T6 sold separately).• Plug-in photocell (PC3 or PC15 sold separately).• 1/2” knockout for photcell mounting.• Four (4) to eight (8) double knockoutsfor 1/2” or 3/4” conduit.• One (1) 1- 1/2” conduit inlet.• Hinged bottom plate.• Large wiring compartment.• Large terminal blocks to accommodateup to four (4) #10 wires.• Plug-in photo cell outlet.• Plug-in time clock outlet (X10 compatible).• Epoxy encapsulated toroidal transformerwith built-in primary thermal protection.• 12V, 13V, 14V, 15V, 17V, 20V, and 22Voutput taps.• Magnetic circuit breaker for each 300wsecondary circuit.• 6-ft. grounded cord and plug.• Indoor/Outdoor ETL, cETL Listed.• Limited lifetime warranty.TSS_-2222 Volt StainlessTransformers• 304 stainless steel case.• Removable door.• Weatherproof compartment for plug in timeclock (T5 or T6 sold separately).• Plug-in photocell (PC3 or PC15 sold separately).• 1/2” knockout for photocell mounting.• Four (4) to eight (8) double knockoutsfor 1/2” or 3/4” conduit.• One (1) 1- 1/2” conduit inlet.• Hinged bottom plate.• Large wiring compartment.• Large terminal blocks to accommodateup to four (4) #10 wires.• Plug-in photo cell outlet.• Plug-in time clock outlet (X10 compatible).• Epoxy encapsulated toroidal transformerwith built-in primary thermal protection.• 12V, 13V, 14V, 15V, 17V, 20V, and 22Voutput taps.• Magnetic circuit breaker for each 300wsecondary circuit.• 6-ft. grounded cord and plug.• Indoor/Outdoor ETL, cETL Listed.• Limited lifetime warranty.TBC_-15IngroundTransformers• Fiberglass reinforced composite boxwith composite lid and silicone gasketing.• Separate wiring compartment with two (2)3/4” inlets.• Epoxy encapsulated toroidal transformerwith built-in primary thermal protection.• Magnetic circuit breaker for each 300wsecondary circuit.• Shielding between primary andsecondary circuits.• 12V, 13V, 14V, and 15V output taps.• Multiple 1/2” knockouts on bottom of box.• Waterproof connectors for low voltage cableoutlets. One (1) supplied with 300w unit,two (2) supplied with 600w unit.• Potting compound supplied for linevoltage wiring compartment.• ETL, cETL Listed.• Ten-year warranty.99

Tr a n s f o r m e r sTr a n s f o r m e r Ac c e s s o r yCo m p a t a b il i t y*Cat. Number Description Height Width Depth PC1 PC3 PC15 T5 T6TC151-12 150VA, 12V TAP, Painted (not pictured) 11-1/2” 3-1/4” 3-1/4” 4TC151-12TP 150VA, 12V TAP, Painted, W/Timer, PC (not pictured) 11-1/2” 3-1/4” 3-1/4”TC344-15 300VA Multitap, Painted, Hinged Door 11-3/8” 6-3/8” 5-5/8” 4 4 4 4TC644-15 600VA Multitap, Painted, Hinged Door 12-5/8” 7-1/2” 6” 4 4 4 4TC944-15 900VA Multitap, Painted, Hinged Door 14” 8-7/8” 7” 4 4 4 4TSS344-15 300VA Multitap, Stainless, Hinged Door 11-3/8” 6-3/8” 5-5/8” 4 4 4 4TSS644-15 600VA Multitap, Stainless, Hinged Door 12-5/8” 7-1/2” 6” 4 4 4 4TSS944-15 900VA Multitap, Stainless, Hinged Door 14” 8-7/8” 7” 4 4 4 4TC383-22 300VA HO Multitap, Painted 11-3/8” 6-3/8” 5-3/8” 4 4 4 4TC683-22 600VA HO Multitap, Painted 17” 5-1/4” 5-1/4” 4 4 4 4TC983-22 900VA HO Multitap, Painted 17-1/4” 8” 6-3/4” 4 4 4 4TC1283-22 1200VA HO Multitap, Painted 17-1/4” 8” 6-3/4” 4 4 4 4TC1583-22 1500VA HO Multitap, Painted 17-1/4” 8” 6-3/4” 4 4 4 4TSS683-22 600VA HO Multitap, Stainless 17” 5-1/4” 5-1/4” 4 4 4 4TSS983-22 900VA HO Multitap, Stainless 17-1/4” 8” 6-3/4” 4 4 4 4TSS1283-22 1200VA HO Multitap, Stainless 17-1/4” 8” 6-3/4” 4 4 4 4TSS1583-22 1500VA HO Multitap, Stainless 17-1/4” 8” 6-3/4” 4 4 4 4TB100-12 100VA Cast Iron Inground, 12V (not pictured) 4” 4” 5”TBC303-15 300VA Inground Multitap, one 1/2” Knockout 9-5/8” dia. 12-7/8”TBC603-15 600VA Inground Multitap, two 1/2” Knockouts 10-5/8” dia. 12-7/8”*Accessory compatability is model specific. Please see accessory descriptions below.Tr a n s f o r m e r Ac c e s s o r i e s:T5T6PC1PC3PC15Plug-in analog transformertime clock.Plug-in digital transformertime clock with batteryback-up.Hardwire photo cell.Finger type, adjustablephoto control.1/2” [13mm] NPSfor mounting.Plug-in photo cell,3” [78mm] leadfor direct mountto transformer housing.Plug-in photo cell,15-ft. [46.8m] leadfor remote mount.100

Stakes/Connectors/Miscellaneous SuppliesConnectorsLVC3Low Voltage Quick Connectorwith positive lock screw design.Heavier prongs for a more positiveconnection with base ensuresproper fit for single circuit.LVC4Low Voltage “T” connectorfor branching off existing lowvoltage cable for additional runs.MA22Silicone-filled wire connectors.Necessary to protect splicingsfrom moisture and oxidation.Handles up to 10 gauge wire.Boxed twenty-five (25)per carton.StakesS1S6S7S7NExtruded aluminum stake,10” [254mm] long with1/2” [13mm] NPS stainlesslocking screws.Black powdercoat finish.Telescopic low voltage stake.Constructed of non-corrosivePVC. Field adjustable 2”-14”[51mm-356mm] aboveground. Ideal for use in fastgrowing annual beds. (U.S.Patent No. 7,741,133).Two-piece low voltagemounting stake. PVC stake1-3/8” [35mm] O.D. x 9-1/2”[241mm] long with integral1/2” [ 13mm] NPS fitter.Includes ABS, removable1/2” NPS [ 13mm] fitter.Two-piece low voltagemounting stake with brass cap.PVC stake 1-3/8” [35mm]OD x 9-1/2” [241mm] longwith integral 1/2” [13mm] NPSfitter. Includes die-cast brass,removable 1/2” NPS [13mm]fitter.S8Two-piece low voltagemounting stake. PVC stake1-3/8” [35mm] O.D. x 15”[375mm] long with threaded1/2” [13mm] NPS removablefitter.S8NTwo-piece low voltagemounting stake with brass cap.PVC stake 1-3/8” [35mm]O.D. x 15” [375mm] longwith die-cut brass removable1/2” [ 13mm] NPS fitter.TS375-12Black 19” [494mm] PVCMounting Stake with integral75w Electronic Transformer.3” [78mm] OD ABS cap withthreaded 1/2” [13mm] NPShub. To be used with 12 voltfixtures (sold separately)and 120 volt power source.101

Mounting CanopiesMC1MC1NM0040M0041Low voltage mounting canopy.Cast aluminum with 1/2” [13mm]NPS inlet. Suitable for trees,soffit, wall or deck mountingof many low voltage fixtures.2-7/8” [73mm] round.Low voltage mounting canopy.Cast brass with 1/2” [13mm]NPS inlet. Suitable for trees,soffit, wall or deck mountingof many low voltage fixtures.2-7/8” [73mm] round.Low voltage mountingcanopy for single fixture.5” [1 27mm] square.Low voltage mountingcanopy for two (2) fixtures.5” [1 27mm] square.Tree Mount AcessoriesTM1HLow voltage tree mountcanopy. Bronze finish.Combination lag screwswith hex nuts included.WireTMS10Nylon Tree Strap-Black – A non-intrusiveway of mounting line or low voltage bullytefixture to a tree. 10-ft. [3.05m], field-cutto length. Nylon strap [7/8” wide] with highstrength, durable ABS adjustable fastener.500 lbs strength test. Use with: TMC2H(line voltage) TM1H (low voltage).MiscellaneousMF1Pack of twelve (12)combination galvanizedlag screws with hex nutsfor attaching canopiesand ballast boxes in trees.SCW100-12Low Voltage Cable – SingleCircuit 12V, 2 conductor,12 gauge, 100-ft.SCW500-12Low Voltage Cable – SingleCircuit 12V, 2 conductor,12 gauge, 500-ft.SCW500-10Low Voltage Cable – SingleCircuit 12V, 2 conductor,10 gauge, 500-ft.MA2Marker flags. Vinyl 3”[76mm] x 5” [127mm]on 18” [457mm] stemwith area for writing modelnumbers and lampnumbers.MA4Corrosion preventive compound.Two-ounce tube. Speciallyformulated non-conductive sealantand corrosion preventative.For use on sockets and electricalcontacts.102

Photometric Data20W MR11Average Life, 2000 Hrs.35W MR11Average Life, 2000 Hrs.20W MR16Average Life, 2000 Hrs.35W MR16Average Life, 3000 Hrs.42W MR16Average Life, 3000 Hrs.50W MR16Average Life, 3000 Hrs.75W MR16Average Life, 3500 Hrs.18W PAR36 (Halogen)Average Life, 4000 Hrs.36W PAR36 CAP (Halogen)Average Life, 4000 Hrs.50W PAR36Average Life, 2500 Hrs.103

104

IDEA GALLERYThese pages show the versatility of Philps Hadco lighting tools in bringing outdoor landscapes to life.The images capture our products doing what they do best – blending into design and making it shine.Pathlytes safely lead the way to the mainentrance, while bullytes create shadow intereston an otherwise plain brick wall.Skilled application of underwater lighting addsenchantment to this fountain, framed in thelush texture of uplit foliage.The geometry of this landscape designtakes on an additional glow with focusedinground lighting.This installation demonstrates the depth andtexture uplighting can bring to a night landscape.Uplighting this home lends dramatic dimensonand allows its simple, strong lines to shinethrough dusk and beyond.Combined spotlighting, uplighting andunderwater lighting give each element of thislandscape just enough definition to harmonizeinto a rich, yet unified scene.105

An otherwise plain structure takes on newlife as a canvas for shadowing effects …while at the same time, benefiting fromthe added security.Walkway lighting welcomes guests intoa lovely scene without disrupting theatmosphere with unwanted glare.This inground installation grazes the textureof the masonry work, while at the same timeguiding the eye upward toward the subject.With this holiday display, the city made creativeuse of accent lights to enhance the festiveatmosphere.Stately columns are ideal subjects to spotlight,downlight, and paint with light … especiallyin a courtyard where a gentle rain gives lightmore room to play.This backyard landscape is just as safe, secureand inviting after dark thanks to well-placedspread, walkway, and silhouette lighting.106

IDEA GALLERYBeautiful outdoor environments become warm and welcoming after dark with a creative blend of fixtures and techniques.Note that, as in all well-crafted lighting installations, darkness is not eradicated; rather, it is used as a defining tool.Another view of the same deck/patio area shows how vertical post-mounted downlights punctuatethe lines of the patio … while at the same time revealing the potentially hazardous dropoff.In another corner of the pool area, uplightingthe natural beauty and texture of this statelytree makes it a source of visual warmthand an important anchor point in thelandscape design.107

The dramatic artistry of this landscape loses none of its beauty to the night, thanks to a skilled application of various fixtures and techniques.Note the depth and intrigue created by accentuating different layers of this environment.Closer inspection of the same home reveals how, with properly controlled lighting, this landscapedesigner gently directs the viewer’s attention to the most noteworthy features of the scene.From front landscape to back, the hometransitions from formal to casual. Spreadlighting, uplighting and spotlighting framethe enchanting illuminated water features . . .while walkway and spread lighting showthe way in.108

Line VoltageAccent Lighting

For ultimate flexibility in large-scale or commercial projects,count on Philips Hadco accent products to give you all the options.We engineer our fixtures to create possibilities, not to limit them.That’s why our accent lights can accommodate incandescent,fluorescent or HID lamping.You can also rely on Philips Hadco to offer the control you need …from integral stepdown transformers to our variety of shroud styles.And our selection of remote ballasts gives you the freedomto place our fixtures virtually anywhere in your design.

BULLYTESEW 1-N BrassEW1-N Natural Brass• 120 Volt with integral transformer• 10 watt maximum• T3 Lamp (included)Housing – Die-cast brass bodywith fully-adjustable yoke, brass canopywith brass stem and screws. Includes 30ºflood aluminum reflector.Finish – Natural brass.Lens – Clear tempered glass.Socket – Bi-pin type (G4).Electrical – Stepdown transformerreduces line voltage to 12 volts. Transformeris potted/encapsulated and features thermaloverload protection.Wiring – Incandescent pre-wiredwith high temperature #18 wire.ETL, cETL Listed.18-3/8"[467mm]BT711 AluminumBT711-A BlackBT711-H Bronzecatalog no.ML7descriptionLouverBT711-G Verde• 120 Volt• 35 watt maximum (MR11)• 20 watt maximum (T3 halogen)• 1/2” NPS fitter• Integral stepdown transformerHousing – Die-cast aluminum withfully-adjustable swivel arm, with vibration-prooflocking teeth.Shroud – Fully-rotatable, gasketed,cast aluminum.Finish – Black, hand-rubbed verde antiquedover black thermoset powdercoat, or bronzethermoset powdercoat.Lens – Clear tempered glass.Socket – Ceramic bi-pin (G4).Electrical – Stepdown transformer reducesline voltage to 12 volts. Transformer is potted/encapsulated and features thermal overloadprotection. Can be used with energy-efficienthalogen lamps.Wiring – Pre-wired with #18 AWG black,white and ground.ETL, cETL Listed.4-3/8"[111mm]BT5016 AluminumBT5016-A Black BT5016-G VerdeBT5016-H Bronze• 120 Volt• 50 watt maximum• MR16 Lamp• 1/2” NPS fitter• Integral stepdown transformerHousing – Die-cast marine-gradealuminum with fully-adjustable swivel arm,with vibration-proof locking teeth.Shroud – Fully-rotatable, gasketed,cast marine-grade aluminum.Finish – Black, hand-rubbed verde antiquedover black thermoset powdercoat, or bronzethermoset powdercoat.Lens – Clear tempered glass affixed at 10º anglefor natural cleaning.Socket – Ceramic bi-pin (GU5.3).Electrical – Stepdown transformer reduces linevoltage to 12 volts. Transformer is potted/ encapsulatedand features thermal overload protection. Can be usedwith energy-efficient halogen lamp.Wiring – Pre-wired with #18 AWG black,white and ground.ETL, cETL Listed.catalog no.descriptionICG16 LouverIBL16 Ice Blue Lenscatalog no.5-3/8"[137mm]ISL16descriptionSpread LensIAS16 Linear Spread Lens7-1/4"[184mm]5"[127mm]2"[51mm]5"[127mm]2-13/16"[71mm]111

BT1 Aluminum (LONG SHROUD)BT1-AL BlackBT1-HL Bronze• 120 Volt• 75 watt maximum• MR16 Lamp• 1/2” NPS fitter• Integral stepdown transformerHousing – Die-cast aluminum with fully-adjustableswivel arm, with vibration-proof locking teeth.Shroud – Fully-rotatable, gasketed, cast aluminum.Finish – Black or bronze thermoset powdercoat.Lens – Clear, tempered glass.Socket – Ceramic bi-pin (GU5.3).Electrical – Stepdown transformer reduces linevoltage to 12 volts. Transformer is potted/encapsulatedand features thermal overload protection.Can be used with energy-efficient halogen lamp.Wiring – Pre-wired with #18 AWG black,white and ground.ETL, cETL Listed.BT1 Aluminum (SHORT SHROUD)BT1-AS BlackBT1-HS Bronze• 120 Volt• 75 watt maximum• MR16 Lamp• 1/2” NPS fitter• Integral stepdown transformerHousing – Die-cast aluminum with fully-adjustableswivel arm, with vibration-proof locking teeth.Shroud – Fully-rotatable, gasketed, cast aluminum.Finish – Black or bronze thermoset powdercoat.Lens – Clear, tempered glass.Socket – Ceramic bi-pin (GU5.3).Electrical – Stepdown transformer reduces linevoltage to 12 volts. Transformer is potted/encapsulatedand features thermal overload protection.Can be used with energy-efficient halogen lamp.Wiring – Pre-wired with #18 AWG black,white and ground.ETL, cETL Listed.catalog no.descriptioncatalog no.descriptioncatalog no.descriptioncatalog no.descriptionICG16 LouverISL16Spread LensICG16 LouverISL16Spread LensIBL16Ice Blue LensIAS16 Linear Spread LensIBL16Ice Blue LensIAS16 Linear Spread Lens8-3/8"[213mm]6-5/16"[161mm]5"[127mm]3-7/8"[98mm]5"[127mm]3-13/16"[96mm]112

ullytesB1 AluminumB1-A Black B1-G Verde B1-H BronzeB1-T Speckled Stone B1-U Sienna• 120 Volt• 100 watt maximum• PAR/R20 Lamp (R & HID lamp requires shroud)• 1/2” NPS fitter • Shrouds optionalBALLAST – Remote ballast housing available for HID models.Please see remote ballast ordering guide on page 12 1.Housing – Die-cast aluminum with fully-adjustableswivel arm with vibration-proof locking teeth.SHROUDS – Die-cast aluminum, provided with lensand silicone O-ring. (See ordering chart below.)Finish – Black, hand-rubbed verde antiqued over blackthermoset powdercoat, bronze, speckled stoneor sienna thermoset powdercoat.Lens – Provided with optional shrouds only.Socket – High temperature porcelain medium base.Wiring – Pre-wired with high temperature #18 wire.ETL, cETL Listed.Or d e r i n g Gu i d e f o r Op t io n a l Sh r o u d sFinish(A) Black(G) Verde Lens(H) Bronze Shroud (B) Convex Ice BlueSize (T) Speckled Stone (L) Long (C) Convex Clear(1) Small (B1) (U) Sienna (S) Short (O) Flat/Clear1 (Specify) (Specify) (Specify)B1 BrassB1-NL Natural BrassB1-OBL Oiled Brass• 120 Volt• 100 watt maximum• PAR20 or R20 Lamp• 1/2” NPS fitter• Long shroud includedBALLAST – Remote ballast housing availablefor HID models.Please see remote ballast ordering guide on page 12 1.Housing – Die-cast brass with fully-adjustableswivel arm with vibration-proof locking teeth.Shroud – Fully-rotatable, gasketed, die-cast brass.Finish – Natural brass or oiled brass.Lens – Flat, clear tempered glass.Socket – High temperature porcelain medium base.Wiring – Pre-wired with high temperature #18 wire.ETL, cETL Listed.catalog no.ML1descriptionLouvercatalog no.descriptionML1Louver6-5/16"[160mm]5-7/16"[138mm]2-5/16"[59mm]8-1/2"[216mm]3-7/8"[98mm]2-3/8"[60mm]8-3/16"208mm]3-7/8"[98mm]113

BU1 CompositeBU1-A BlackBU1-H BronzeBU1-G Verde• 120 Volt• 50 watt maximum• PAR/R20 Lamp (R & HID lamp requires shroud)• 1/2” NPS fitter• Shrouds optionalBALLAST – Remote ballast housing available for HID models.Please see remote ballast ordering guide on page 12 1.Housing – One-piece injection molded Ultem ®High Performance Polymer with fully-adjustable swivel armwith vibration-proof locking teeth.Finish – Color impregnated material in black,hand-rubbed verde antiqued over black, or bronze.Lens – Provided with optional shrouds only.Socket – High temperature porcelain medium base.Wiring – Pre-wired with high temperature #18 wire.ETL, cETL Listed.Or d e r i n g Gu i d e f o r Op t io n a l Sh r o u d sFinish Lens(A) Black Shroud (B) Convex Ice BlueSize (G) Verde (L) Long (C) Convex Clear(1) Small (BU1) (H) Bronze (S) Short (O) Flat/Clear1U (Specify) (Specify) (Specify)catalog no.descriptionB3 AluminumB3-A BlackB3-G VerdeB3-H Bronze• 120 Volt• 100 watt maximum• PAR/R30 Lamps• 1/2” NPS fitter• Long shroud includedBALLAST – Remote ballast housing availableor HID models.Please see remote ballast ordering guide on page 12 1.Housing – Die-cast aluminum with fully-adjustableswivel arm with vibration-proof locking teeth.Shroud – Fully-rotatable, gasketed, die-cast aluminum.Finish – Black, hand-rubbed verde antiqued over blackthermoset powdercoat, or bronze thermoset powdercoat.Lens – Clear tempered glass permanently affixedat 10º angle for natural cleaning.Socket – High temperature porcelain medium base.Wiring – Pre-wired with high temperature #18 wire.ETL, cETL Listed.catalog no.ML3descriptionLouverML1Louver8-1/2"[216mm]9-1/2"[241mm]6-5/16"[160mm]5-7/16"[138mm]2-5/16"[59mm]3-7/8"[98mm]2-5/16"[59mm]5-5/16"[135mm]114

ullytesBU3 CompositeBU3-A BlackBU3-G VerdeBU3-H Bronze• 120 Volt• 75 watt maximum• PAR/R30 Lamps• 1/2” NPS fitter• Long shroud includedBALLAST – Remote ballast housing available for HID models.Please see remote ballast ordering guide on page 12 1.Housing – One-piece injection molded Ultem ®High Performance Polymer with fully-adjustable swivel armwith vibration-proof locking teeth.Shroud – Fully-rotatable, gasketed, injection moldedUltem ® High Performance Polymer.Finish – Color impregnated material in black,hand-rubbed verde antiqued over black, or bronze.Lens – Clear tempered glass permanently affixedat 10º angle for natural cleaning.Socket – High temperature porcelain medium base.Wiring – Pre-wired with high temperature #18 wire.ETL, cETL Listed.1020 Aluminum1020-H Bronze• 120 Volt• 150 watt maximum• PAR38 Lamp• 1/2” NPS fitterHousing – Cast aluminum constructionwith fully adjustable swivel arm with vibration-prooflocking teeth.Finish – Bronze thermoset powdercoat finish.Socket – Porcelain medium base.Wiring – Pre-wired with high temperature#18 wire.ETL, cETL Listed.catalog no.descriptionML3Louver9-1/2"[241mm]5-5/16"[135mm]7-3/16"[183mm] 6"[152mm]2-5/16"[59mm]3-7/16"[187mm]115

B4 BrassNon Reflector Models HID Reflector ModelsB4-NL Natural Brass BN4-NL Natural Brass, Narrow ReflectorB4-OBL Oiled BrassBN4-OBL Oiled Brass, Narrow ReflectorBW4-NL Natural Brass, Wide ReflectorBW4-OBL Oiled Brass, Wide Reflector• 300 watt maximum incandescent• 150 watt maximum HID*• PAR38/R40 Lamp, non reflector model• E17 Lamp, reflector models• 1/2” NPS fitter• Long shroudBALLAST – Remote ballast housing available for HID models.Please see remote ballast ordering guide on page 121.Housing – Die-cast brass with fully adjustable swivel armwith vibration-proof locking teeth.Shroud – Fully-rotatable with silicone O-ring gasket,die-cast brass.Finish – Natural brass or oiled brass.Lens – BN4, BW4, flat clear tempered glass.Socket – Porcelain medium base.Wiring – Pre-wired with high temperature #18 wire.ETL, cETL Listed.*150w HID cannot be oriented in a straight downward vertical position.Ph o t o m e t r i c In f o r m a t io nBW4-150H Canopy, 30’ SetbackTransverse Distance (ft.)Transverse Distance (ft.)Transverse Distance (ft.)Longitudinal Distance (ft.)BN4-150H Canopy, 30’ Setback12110.1 .2 .5 15 220122 1 1 2Longitudinal Distance (ft.)Transverse Distance (ft.)1BW4-150H Wall, 10’ Setback, 60° tilt.1.251Longitudinal Distance (ft.)BN4-150H Wall, 10’ Setback, 60° tilt.1.25120Longitudinal Distance (ft.)catalog no.ML4descriptionLouver6-1/4"[159mm]13"[330mm]2-5/16"[59mm]116

ullytesB4 Aluminum (NO shroud) B4 Aluminum (short shroud)Incandescent Models HID Reflector ModelsB4-A BlackBN4-AL Black, Long Shroud, Narrow ReflectorB4-G VerdeBN4-HL Bronze, Long Shroud, Narrow ReflectorB4-H BronzeBN4-AS Black, Short Shroud, Narrow ReflectorBN4-HS Bronze, Short Shroud, Narrow ReflectorBW4-AL Black, Long Shroud, Wide ReflectorBW4-HL Bronze, Long Shroud, Wide ReflectorBW4-AS Black, Short Shroud, Wide ReflectorBW4-HS Bronze, Short Shroud, Wide Reflector• 300 watt maximum incandescent (R40 Lamp)• 150 watt maximum HID*• PAR38/R40 Lamp (HID or R Lamp, must order shroud, below)• E17 Lamp, reflector models• 1/2” NPS fitter• Shrouds optionalBallast – Remote ballasts required for HID lamps.Please see remote ballast ordering guide on page 121.Housing – Die-cast aluminum with fully-adjustable swivel armwith vibration-proof locking teeth.Shroud – Fully-rotatable with silicone O-ring gasket, die-castaluminum. B4, shroud is optional (see ordering information below);BN4, BW4, shroud included.Finish – Black thermoset powdercoat, hand-rubbed verde antiquedover black thermoset powdercoat, or bronze thermoset powercoat.Lens – BN4, BW4 clear convex tempered glass included with shroud.Socket – Porcelain medium base.Wiring – Pre-wired with highcatalog no. descriptiontemperature #18 wire.ML4 LouverETL, cETL Listed.*150w HID cannot be oriented in a straight downward vertical position.Or d e r i n g Gu i d e f o r Op t io n a l Sh r o u d sFinishLens(A) Black Shroud (B) Convex Ice BlueSize (G) Verde (L) Long (C) Convex Clear(4) Large (B4) (H) Bronze (S) Short (O) Flat/Clear4 (Specify) (Specify) (Specify)Ph o t o m e t r i c In f o r m a t io nTransverse Distance (ft.)Transverse Distance (ft.)2112BW4-150H Canopy, 30’ Setback10-3/16"[259mm]Longitudinal Distance (ft.)BN4-150H Canopy, 30’ Setback.1 .2 .5 15 28-9/16"[218mm]2-5/16"[59mm]10202 1 1 2Longitudinal Distance (ft.)Transverse Distance (ft.)Transverse Distance (ft.)16-1/2"[419mm]11BW4-150H Wall, 10’ Setback, 60° tilt1.25.1Longitudinal Distance (ft.)BN4-150H Wall, 10’ Setback, 60° tilt20.1.251Longitudinal Distance (ft.)6-1/4"[159mm]117

B4 ALUMINUM (LONG SHROUD)Fluorescent ModelsBF432-AL Black, Long Shroud, 32W CFLBF432-HL Bronze, Long Shroud, 32W CFLBF432-AS Black, Short Shroud, 32W CFLBF432-HS Bronze, Short Shroud, 32W CFLBF426-AL Black, Long Shroud, 26W CFLBF426-HL Bronze, Long Shroud, 26W CFLBF426-AS Black, Short Shroud, 26W CFLBF426-HS Bronze, Short Shroud, 26W CFLBF418-AL Black, Long Shroud, 18W CFLBF418-HL Bronze, Long Shroud, 18W CFLBF418-AS Black, Short Shroud, 18W CFLBF418-HS Bronze, Short Shroud, 18W CFL• 32 watt maximum• Compact fluorescent lamp• 1/2” NPS fitter• Long or short shroudHousing – Die-cast aluminum with fully-adjustableswivel arm with vibration-proof locking teeth.Shroud – Fully-rotatable with silicone O-ring gasket,die-cast aluminum.Finish – Black or bronze thermoset powdercoat.Lens – Clear convex tempered glass includedwith shroud.Socket – 32 and 26w: GX24q-3;18w: GX24q-2Reflector – Spun aluminum flood reflector.Ballast – Integral electronic fluorescent ballast,120 volt feed. Min. -20°C start temp.Contact factory for other voltage options.Wiring – Pre-wired with high temperature #18 wire.ETL, cETL Listed.Ph o t o m e t r i c In f o r m a t io nBF432 Canopy, 10’ SetbackTransverse Distance (ft.).See page 18for LED models.catalog no.ML421.1 .2 .5Longitudinal Distance (ft.)2-5/16"[59mm]descriptionLouverTransverse Distance (ft.)16-1/2"[419mm]BF432 Wall, 10’ Setback, 60° tilt.25.1 .251 .25Longitudinal Distance (ft.)6-1/4"[159mm]118

ullytesBU4 Composite (long shroud)Incandescent Models HID Reflector ModelsBU4-A BlackBU4-G VerdeBU4-H BronzeBUN4-AL Black, Long Shroud, Narrow ReflectorBUN4-HL Bronze, Long Shroud, Narrow ReflectorBUN4-AS Black, Short Shroud, Narrow ReflectorBUN4-HS Bronze, Short Shroud, Narrow ReflectorBUW4-AL Black, Long Shroud, Wide ReflectorBUW4-HL Bronze, Long Shroud, Wide ReflectorBUW4-AS Black, Short Shroud, Wide ReflectorBUW4-HS Bronze, Short Shroud, Wide Reflector• 175 watt maximum incandescent (BU4 models)• 100 watt maximum HID* (BUN4 and BUW4 models)• PAR38/R40 Lamp (HID or R Lamp, must order shroud, below)• E17 Lamp, reflector models• 1/2” NPS fitter• Shrouds optional. See below.Ballast – Remote ballasts required for HID lamps.Please see remote ballast ordering guide on page 121.Housing – One-piece injection molded Ultem ® High PerformancePolymer, with fully-adjustable swivel arm with vibration-proof locking teeth.Shroud – One-piece injection molded Ultem ® High PerformancePolymer with silicone O-ring gasket. Lens is siliconed into shroud. BU4, shroudoptional (see ordering information below); BUN4, BUW4, shroud included.Finish – Color impregnated material in black or bronze,hand-rubbed Verde over black.Lens – BUN4, BUW4 clear convex tempered glass included with shroud.Socket – Porcelain medium base.Wiring – Pre-wired with highcatalog no. descriptiontemperature #18 wire.ML4 LouverETL, cETL Listed.*100w HID cannot be oriented in a straight downward vertical position.Or d e r i n g Gu i d e f o r Op t io n a l Sh r o u d sFinishLens(A) Black Shroud (B) Convex Ice BlueSize (G) Verde (L) Long (C) Convex Clear(4) Large (BU4) (H) Bronze (S) Short (O) Flat/Clear4U (Specify) (Specify) (Specify)BU4 Composite (no shroud)Ph o t o m e t r i c In f o r m a t io nTransverse Distance (ft.)Transverse Distance (ft.)2112BW4-100H Canopy, 30’ Setback10-3/16"[259mm]8-9/16"[218mm]Longitudinal Distance (ft.)BN4-100H Canopy, 30’ Setback.1 .2 .5 15 22-5/16"[59mm]10202 1 1 2Longitudinal Distance (ft.)16-1/2"[419mm]Transverse Distance (ft.)Transverse Distance (ft.)11BW4-100H Wall, 10’ Setback, 60° tilt1.25.1Longitudinal Distance (ft.)BN4-100H Wall, 10’ Setback, 60° tilt20.1.251Longitudinal Distance (ft.)6-1/4"[159mm]119

BU4 composite (long shroud)Fluorescent ModelsBUF432-AL Black, Long Shroud, 32W CFLBUF432-HL Bronze, Long Shroud, 32W CFLBUF432-AS Black, Short Shroud, 32W CFLBUF432-HS Bronze, Short Shroud, 32W CFLBUF426-AL Black, Long Shroud, 26W CFLBUF426-HL Bronze, Long Shroud, 26W CFLBUF426-AS Black, Short Shroud, 26W CFLBUF426-HS Bronze, Short Shroud, 26W CFLBUF418-AL Black, Long Shroud, 18W CFLBUF418-HL Bronze, Long Shroud, 18W CFLBUF418-AS Black, Short Shroud, 18W CFLBUF418-HS Bronze, Short Shroud, 18W CFL• 32 watt maximum• Compact fluorescent lamp• 1/2” NPS fitter• Long or short shroudHousing – One-piece injection molded Ultem ®High Performance Polymer with fully-adjustableswivel arm with vibration-proof locking teeth.Shroud – One-piece injection molded Ultem ®High Performance Polymer with silicone O-ring gasket.Lens is siliconed into shroud.Finish – Color impregnated material in black or bronze.Lens – Clear convex tempered glass included with shroud.Socket – 26 and 32w: GX24q-3;18w: GX24q-2Reflector – Spun aluminum flood reflector.Ballast – Integral electronic fluorescent ballast,120 volt feed. Min. -20°C start temp. Contact factoryfor other voltage options.Wiring – Pre-wired with high temperature #18 wire.ETL, cETL Listed.Transverse Distance (ft.)catalog no.ML42-5/16"[59mm]descriptionLouverPh o t o m e t r i c In f o r m a t io nBF432 Canopy, 10’ Setback.21.1 .2 .5Longitudinal Distance (ft.)Transverse Distance (ft.)16-1/2"[419mm]BF432 Wall, 10’ Setback, 60° tilt.25.1 .251 .25Longitudinal Distance (ft.)6-1/4"[159mm]120

Remote BallastsMetal Halide HID Ballast BoxesModel NumberMax. DistanceAbove Ground (Dimensions) Description to LampABH351 6-1/4”W, 10-3/8”H ( 1) 35w MH 15 ft.ABH501 6-1/4”W, 10-3/8”H ( 1) 50w MH 25 ft.ABH701 6-1/4”W, 10-3/8”H ( 1) 70w MH 25 ft.ABH1001 6-1/4”W, 10-3/8”H ( 1) 100w MH 25 ft.ABH1501 6-1/4”W, 10-3/8”H ( 1) 150w MH 25 ft.Consult factory for fixture mounting options.(factory recommended drilling and tapping)Consult factory for recommended maximum distance to lamp.Can be extended to 50 ft. if used with a long range ignitor.ABH Above GroundElectrical – 120V standard. Contact factory for other voltages.Long range ignitor standard. Core and coil ballast encapsulatedfor moisture resistance.Housing – Above ground: Zinc-plated steel thermosetpowder-coated black with stainless steel screwsInstallation – Housing must be mounted at least one (1) footabove ground level.Certification – ETL/cETL Listed to US and Canadiansafety standards for wet locations.Metal Halide HID Ballast BoxesModel NumberMax. DistanceInground (Dimensions) Description to LampIBH351 9-5/8” Dia., 12-1/4”H ( 1) 35w MH 15 ft.IBH501 9-5/8” Dia., 12-1/4”H ( 1) 50w MH 25 ft.IBH701 9-5/8” Dia., 12-1/4”H ( 1) 70w MH 25 ft.IBH1001 9-5/8” Dia., 12-1/4”H ( 1) 100w MH 25 ft.IBH1501 9-5/8” Dia., 12-1/4”H ( 1) 150w MH 25 ft.IBH IngroundElectrical – 120V standard. Contact factory for other voltages.Long range ignitor standard. Core and coil ballast encapsulatedfor moisture resistance.Housing – Fiberglass reinforced composite with composite lid,silicone gasket and stainless screws.Installation – Bury with minimum 3” gravel around housingfor drainage. Seal conduit entry with duct seal and potting compound.Lid must be visible for access.Certification – ETL/cETL Listed to US and Canadiansafety standards for wet locations.Consult factory for fixture mounting options.(factory recommended drilling and tapping)Consult factory for recommended maximum distance to lamp.Can be extended to 50 ft. if used with a long range ignitor.121

Metal Halide HID Ballast BoxesModel NumberAbove Ground (Dimensions) Description FinishWBH351A 7-5/32” Dia., 4-1 3/32” H (1 ) 35w MH BlackWBH351H 7-5/32” Dia., 4-1 3/32” H (1 ) 35w MH BronzeWBH701A 7-5/32” Dia., 4-1 3/32” H (1 ) 70w MH BlackWBH701H 7-5/32” Dia., 4-1 3/32” H (1 ) 70w MH BronzeWBH1001A 7-5/32” Dia., 4-1 3/32” H (1 ) 1 00w MH BlackWBH1001H 7-5/32” Dia., 4-1 3/32” H (1 ) 1 00w MH BronzeWB wall mountShown with BW4 Bullyte (not included)Electrical – 120V Standard.Contact factory for other voltages.Long range ignitor standard. Core and coilballast encapsulated for moisture resistance.Housing – Cast Aluminum housing andbackplate, with stainless steel mounting screws,1/2” NPS threaded center.Installation – Mount at least one 1’above ground, over recessed junction box(multiple j-box mounting options).After mounting fixture to canopy, attachbackplate to canopy and seal with silicone(provided), to prevent moisture intrusion.Certification – UET/cETL Listed to USand Canadian Standards for wet locations.Su g g e s t e d Applications:ABM/ABH Above GroundIBM/IBH IngroundWB Wall MountShown with S3 Perma Postand B3 Bullyte (not included).3” minimum drainage gravel (by others.)Shown with B4 Bullyte (not included).Shown with BW4 Bullyte (not included).122

Line VoltageFloodlytes

With floodlytes as small as 20 watts, as large as 400 watts,and everything in between, Philips Hadco gives you the flexibilityto install just the right illumination in any application.Whether your goal is sign lighting or security,we give you the lamping options and accessories you’ll needto get the job done.

5"[126mm]WAM1(F) * AluminumWAM1-A BlackWAM1-G VerdeWAM1-B WhiteWAM1-H Bronze• 120 Volt• 75 watt maximum• T3 Halogen lamp• 1/2” NPS fitterHousing – Die-cast aluminum housing with fully adjustableswivel arm (1/2” NPS) with vibration-proof locking teeth.Shroud – Die-cast aluminum with silicone gasketfor waterproof seal.Finish – Black, hand-rubbed verde antiquedover black thermoset powdercoat, bronze or whitethermoset powdercoat.Lens – 1/8” Clear or Frosted tempered glass is siliconedto the shroud.Socket – Mini-can screw base.Wiring – Pre-wired with high temperature #18 wire.ETL, cETL Listed.4-7/8"[123mm]catalog no.3/4"[19mm]MW12descriptionCutoff Louver3-13/16"[96mm]6-7/8" 5"[175mm] [126mm]4-7/8"[123mm]1.22.34.69.3Ph o t o m e t r i c10'In f o r m a t io n8'3-7/16" 6-7/8" WBM16'[88mm] [175mm] Lamp Wattage 75W4' Setback 12'2' Tilt 45º4-7/8"[123mm] 0'WBM1(F) * AluminumWBM1-A BlackWBM1-G VerdeWBM1-B WhiteWBM1-H Bronze• 120 Volt• 75 watt maximum• T3 Halogen lamp • 1/2” NPS fitterHousing – Die-cast aluminum with fully-adjustableswivel arm, with vibration-proof locking teeth.TRIM RING – Die-cast aluminum with silicone gasketfor waterproof seal.Finish – Black, hand-rubbed verde antiquedover black thermoset powdercoat, bronze or whitethermoset powdercoat.Lens – 1/8” Clear or Frosted tempered glass is siliconedto the shroud.Socket – Mini-can screw base.Wiring – Pre-wired with #18 AWG black,white and ground.ETL, cETL Listed.catalog no.setback or Mtg. Ht.Lamp Lumens 2’ 4’ 6’ 8’ 10’ 12’ 14’35w T3 700 18.7 4.7 2.1 1.2 0.7 0.5 0.4* (F) denotes optional Frosted Lens60w T3 1150 30.3 7.6 3.4 1.9 1.2 0.8 0.675w T3 1350 37.2 9.3 4.1 2.4 1.4 1.0 0.7* (F) denotes optional Frosted LensTransverse Distance2 4 6 8Longitudinal 3-13/16" Distance3-13/16"3/4" [96mm] 3/4" [96mm][19mm] Is o f o o t c a n d l e [19mm] Co n v e r s io n sMW12descriptionCutoff Louver6-7/8" 3-7/16"[175mm] [88mm]4-7/8"[123mm]3/4"[19mm]catalog no.MW113-13/16"[96mm]descriptionBarn Doors6-7/8"[175mm]126

floodlytes3/4"[19mm]WAF1/WAF13 FluorescentWAF1-A Black WAF1-B White WAF1-G Verde WAF1-H BronzeWAF13-A Black WAF13-B White WAF13-G Verde WAF13-H Bronze• 120 Volt • 1/2” NPS fitter• WAF1 – 18 watt maximum, WAF13 – 13 watt maximum• WAF1 – two (2) PL9 lamps, WAF13 – one (1) PL13 lampHousing – Die-cast aluminum housing with fully-adjustableswivel arm (1/2” NPS) with vibration-proof locking teeth.Shroud – Die-cast aluminum shroud with silicone gasketfor weatherproof seal.Finish – Black, hand-rubbed verde antiqued over blackthermoset powdercoat, bronze or white thermoset powdercoat.Lens – 1 /8” borosilicate glass is sealed to the door framewith a one-piece molded silicone gasket and spring clips.Reflector – Formed from aluminum, paintedwith high reflectance white paint.Socket – Two (2) G23 (WAF1), or GX23 (WAF13) base,mounted directly to reflector assembly.Ballast – Integral core and coil, NPF, Class B,starting temperature 25˚F (WAF1) and 32˚F(WAF13).ACCESSORIES – Accessories are availablefor this product. Please see FloodlyteAccessory Section on page 137.ETL, cETL Listed.9-11/16"[246mm]8-11/16"[221mm]Transverse Distance (ft.)0.1 0.20.5 125WA1 AluminumWA1-A BlackWA1-G VerdeWA1-B WhiteWA1-H Bronze• 120 Volt• 75 watt maximum• A19 Lamp• 1/2” NPS fitterHousing – Die-cast aluminum housing with fully adjustableswivel arm (1/2” NPS) with vibration-proof locking teeth.Shroud – Single die-cast aluminum shroudwith silicone gasket for weatherproof seal.Finish – Black, hand-rubbed verde antiquedover black thermoset powdercoat, bronze or whitethermoset powdercoat.Lens – 1/8” borosilicate glass is siliconed to the shroud.Socket – Medium base.Wiring – Pre-wired with high temperature #18 wire.ACCESSORIES – Accessories are available for this product.Please see Floodlyte Accessory Section on page 137.ETL, cETL Listed.30'15'0'Ph o t o m e t r i cIn f o r m a t io nWAF1Lamp Wattage 18w (2) PL9Setback 6'Tilt 45ºFixture15'30' 15' 0' 15' 30'9-11/16"Longitudinal 9-11/16" Distance (ft.)9-11/16"[246mm] [246mm][246mm]5-13/16"5-13/16" 5-13/16"5-13/16"[148mm] Is o f o o t c a n d l e Co n v [148mm] e r s io n s [148mm][148mm]Setback or Mtg. Ht.8-11/16" 8-11/16"8-11/16"Lamp[221mm]Lumens 2’ 4’[221mm]6’ 8’ 10’ 12’[221mm]3/4"75w A19 3/4" 1190 3.5 0.9 0.4 0.2 .14 0.1 3/4"4-3/4" [19mm]18w [19mm] (2)PL9 1200 3.5 0.94-3/4"0.4 0.2 .14 0.1 4-3/4" [19mm] 4-3/4"[121mm]13w PL13 900 2.6 .68 [121mm] .56 .17 .11 .07 [121mm][121mm]127

WA2 HIDHOUSING – One-piece aluminum extrusion with architecturally styled rounded die-castaluminum sides. Integral hinged lens bracket pivots down for lens removal and relamping.Silicone gasket between the housing and lens provides a long-lasting weathertight seal.Finish – Black, hand-rubbed verde antiqued over black thermoset powdercoat,bronze or white thermoset powdercoat.REFLECTOR – Formed from highly reflective hammertone aluminum and semi-specularkick plates. Reflector assembly is secured to the housing with four (4) stainless steel screws.SOCKET – Mounted directly onto the reflector assembly and UL recognized for appropriatelamps, rated for 4 kv.ELECTRICAL COMPONENTS – Mounted directly to the housing and prewiredwith leads extending from the swivel arm. All electrical components are UL, cUL recognized.BALLAST – Ballasts (HID) are regulating with power factors better than 90% (HPF)and provide +/- 5% lamp power regulation with +/- 10% input voltage regulation.Ballasts are factory wired and tested.MOUNTING – Aluminum die-cast. Locking teeth provide adjustment by tightening one (1)stainless steel recessed screw. 1/2-14” NPS threaded nipple provides secure mounting.Aiming up to a 60º backtilt. Fixtures used outdoors must be protected from rain and sprinklersif aimed downward.ACCESSORIES – Accessories are available for this product. Please see FloodlyteAccessory Section on page 137.ETL, cETL Listed.Transverse Distance (ft.)Ph o t o m e t r i c In f o r m a t io nLamp Wattage 70W HPSSetback 10'Tilt 45º50403020100Fixture1040 30 20 10 0 10 20 30 40Longitudinal Distance (ft.)Lamp Wattage 40W BIAXIs o f o o Setback t c a n d l e Co n 6' v e r s io n sTilt Setback 45º or Mtg. Ht. 45Lamp Lumens 2’ 4’ 6’ 8’ 10’ 12’ 14’35w HPS 2250 8.8 2.2 .98 .55 .35 .24 .1850w HPS 4000 15.6 3.9 1.7 .98 .63 .4330.3270w HPS 6400 25.0 6.3 2.8 1.6 1 .69 .5150w MH 3400 13.3 3.3 1.5 .83 .53 .37 .2770w MH 5500 21.5 5.4 2.4 1.3 .86 .615.44Transverse Distance (ft.)0Or d e r i n g Gu i d eFinish(A) Black(B) White Voltage T total Lamp(G) Verde (E) 120V L lumen LifeSeries (H) Bronze Wattage (H) 277V Wattage Lamp Output (Hrs.)WA2 (Specify) 35S (Specify) 35w HPS E 17 2250 24000WA2 (Specify) 50S (Specify) 50w HPS E 17 4000 24000WA2 (Specify) 70S (Specify) 70w HPS E 17 6400 24000WA2 (Specify) 50H (Specify) 50w MH E 17 3400 5000WA2 (Specify) 70H (Specify) 70w MH E 17 5500 50007-1/8"[181mm]6"[152mm]nsverse Distance (ft.)Fixture17-3/4" 15[451mm]30 15 0 15 30Longitudinal Distance (ft.)Lamp Wattage 40W T12Setback 6'Tilt 45º459"[229mm]3015128

floodlytesWA2 FLuoRESCENTWA2 FLuoRESCENTWA2 FLuoRESCENTHOUSING – One-piece aluminum extrusion with architecturally styled rounded die-cast aluminum sides. Integral hinged lens bracketpivots down for lens removal and relamping. Silicone gasket between the housing and lens provides a long-lasting weathertight seal.Finish – Black, hand-rubbed verde antiqued over black thermoset powdercoat, bronze or white thermoset powdercoat.REFLECTOR – Formed from highly reflective hammertone aluminum and semi-specular kick plates.Reflector assembly is secured to the housing with four (4) stainless steel screws.ELECTRICAL COMPONENTS – Mounted directly to the housing and prewired with leads extending from the swivel arm.All electrical components are UL, cUL recognized.SOCKET – Mounted directly onto the reflector assembly and are UL recognized for appropriate lamps, rated for 4 kv.BALLAST – Ballasts are regulating with power factors better than 90% (HPF).Ballasts shall provide +/- 5% lamp power regulation with +/- 10% input voltage regulation. Ballasts are factory wired and tested.MOUNTING – Aluminum die-cast. Locking teeth provide adjustment by tightening one (1) stainless steel recessed screw.1/2-14” NPSM stainless steel threaded nipple provides secure mounting. Aiming up to a 60˚ backtilt.Fixtures used outdoors must be protected from rain and sprinklers if aimed downward.ACCESSORIES – Accessories are available for this product. Please see Floodlyte Accessory Section on page 137.ETL, cETL Listed.Or d e r i n g Gu i d eFinish(A) Black(B) White voltage total FixtureCatalog (G) Verde (E) 120V Total Min Start Lumen Lamp HousingNumber (H) Bronze Wattage (H) 277V Wattage Lamp Temp Output Life (Hrs) Socket LengthWA2 (Specify) CF213 (Specify) 26w (2)13CFL 0˚C 1600 10000 GX23 17-3/4”WA2 (Specify) CF226 (Specify) 52w (2)26CFL -20˚C 3600 10000 GX24q-3 17-3/4”WA2 (Specify) CF232 (Specify) 64w (2)32CFL -20˚C 4800 10000 GX24q-3 17-3/4”WA2 (Specify) F40BX (Specify) 40w Biax 10˚C 3150 20000 2G 11 30-3/4”WA2 (Specify) F240BX (Specify) 80w (2) Biax 10˚C 6300 20000 2G 11 30-3/4”WA2 (Specify) F240BXCW (Specify) 80w (2) Biax 0˚C 6300 20000 2G 11 30-3/4”WA2 (Specify) F50BX (Specify) 50w Biax 0˚C 4000 12000 2G 11 30-3/4”WA2 (Specify) F250BX (Specify) 100w (2) Biax 0˚C 8000 12000 2G 11 30-3/4”WA2 (Specify) F32 (Specify) 32w T8 10˚C 2950 20000 G13 55-1/2”WA2 (Specify) F232 (Specify) 64w (2) T8 10˚C 5900 20000 G13 55-1/2”129

Ph o t o m e t r i c In f o r m a t io nIs o f o o t c a n d l e Co n v e r s io n sSetback or HeightLamp Lumens 2’ 4’ 6’ 8’ 10’ 12’32w T8 2950 8.7 2.2 0.9 .58 .35 .2464w T8 5900 17.4 4.4 1.8 1.06 0.7 .48Lamp Wattage 70W HPSSetback 10'Tilt 45º504030Is o f o o t c a n d l e Co n v e r s io n sSetback or Height 20Lamp Lumens 2’ 4’ 6’ 8’ 10’ 12’1026w (2)PL 13 1800 5.3 1.4 .59 .35 .21 .1552w (2)PL26 3600 9.8 2.9 1.2 .70 .42 .29040w Biax 3150 9.3 2.3 1.0 .58 .37 .2680w (2)Biax 6300 18.6 10Fixture4.7 2.1 1.2 .74 .5250w Biax 4000 11.8 3.0 1.3 0.7 .47 .3340 30 20 10 0 10 20 30 40100w (2)Biax 8000 23.6 5.9 2.6 1.5 .95 .66Longitudinal Distance (ft.)Transverse Distance (ft.)Lamp Wattage 40W BIAXSetback 6'Tilt 45º45Transverse Distance (ft.)3015015Fixture30 15 0 15 30Longitudinal Distance (ft.)9"[229mm]15-3/4"[400mm]55-1/2"[1410mm]24"[610mm]Transverse Distance (ft.)Lamp Wattage 40W T12Setback 6'Tilt 45º45301509"[229mm]30-3/4"[781mm]Fixture1530 15 0 15 30Longitudinal Distance (ft.)8-7/8"[225mm]17-3/4"[451mm]13"[330mm]7-1/8"[181mm]9"[229mm]6"[152mm]130

floodlytesWA3–HFWB3–HFHOUSING – One-piece aluminum die-casting. Integral cast hinge with stainless steel pinsis concealed internally and allows easy access for relamping. One-piece molded silicone gasketbetween the housing and door frame provides a long-lasting weathertight seal.DOOR FRAME – One-piece die-cast aluminum. WA3 – long shroud with tapered sidesis part of the door frame. Hinged door frame is secured to housing by four (4) stainless steelrecessed captive phillips-head screws.Finish – Black, hand-rubbed verde antiqued over black thermoset powdercoat,bronze or white thermoset powdercoat.REFLECTOR – Formed from highly reflective hammertone aluminum and semi-specular kick plates.Reflector assembly is secured to the housing with four (4) stainless steel screws.LENS – 1/8” tempered glass and is sealed to the door frame with a one-piece molded siliconegasket and spring clips.ELECTRICAL COMPONENTS – Mounted directly to the housing and prewired with leadsextending from the swivel arm. All electrical components are UL, cUL recognized.SOCKET – Mounted directly onto the reflector assembly and are UL recognizedfor appropriate lamps, rated for 4 kv.BALLAST – Ballasts (HID) are regulating with power factors better than 90% (HPF).Ballasts shall provide +/- 5% lamp power regulation with +/- 10% input voltage regulation.MOUNTING – Aluminum die-cast. Locking teeth provide adjustment by tightening one (1)stainless steel recessed screw. 1/2-14” NPS threaded nipple provides secure mounting.accessories – Accessories are available for this product.Please see Floodlyte Accessories Section on page 137.ETL, cETL Listed.131

Is o f o o t c a n d l e Co n v e r s io n sSetback or Mtg. HeightLamp Lumens 4’ 6’ 8’ 10’ 12’ 14’ 16’ 18’ 20’70w HPS 6400 2.5 1.1 1 .63 .40 .28 .20 .16 .12 .10100w HPS 9500 3.7 1.6 .93 .59 .41 .30 .23 .18 .15150w HPS 16000 6.3 2.8 1.6 1 .69 .51 .39 .31 .2570w MH 5500 2.1 .95 .54 .34 .24 .18 .13 .1 1 .09100w MH 7200 2.8 1.2 .70 .45 .31 .23 .18 .14 .1 1150w MH 14000 5.5 2.4 1.4 .88 .61 .45 .34 .27 .22300w Inc. 10450 4.1 1.8 1.0 .65 .45 .33 .25 .20 .16WA3-HF8-1/16"[205mm]11-3/16"[284mm]16-13/16"[427mm]9"[229mm]Transverse Distance (ft.) Transverse Distance (ft.)Setback 10'Tilt 37-1/2º20Fixture60 40 20 0 20 40 60Ph o t o m e Longitudinal t r i c In f Distance o r m a t (ft.) io nWA3-HFHorizontal Flood w/ ShroudLamp Wattage 150W HPSSetback 10'Tilt 37-1/2º6080402004020Fixture2060 40 20 0 20 40 60Longitudinal Distance (ft.)WB3-HF0Transverse Distance (ft.) Transverse Distance (ft.)11-3/16"[284mm]WB3-HFHorizontal Flood w/o ShroudLamp Wattage 150W HPSSetback 10'Tilt 37-1/2º80402020Fixture60 40 20 0 20 40 60Longitudinal Distance (ft.)WA3-HFHorizontal Flood w/ ShroudLamp Wattage 150W HPSSetback 10'16-13/16" Tilt 37-1/2º[427mm]600402005-11/16"[145mm]20Fixture60 40 20 0 20 40 608-1/16" Longitudinal Distance (ft.)[205mm]Or d e r i n g Gu i d eV voltageFinish(E) 120V(A) Black(F) 208VSeries (B) White Photo (G) 240VWA3 (G) Verde Optics Control (H) 277VWB3 (H) Bronze (Horiz. Flood) (Y or N) Wattage (K) 347V Wattage(Specify) (Specify) HF (Specify) 70S (Specify) 70w HPS(Specify) (Specify) HF (Specify) 100S (Specify) 100w HPS(Specify) (Specify) HF (Specify) 150S (Specify) 150w HPS(Specify) (Specify) HF (Specify) 70H (Specify) 70w MH(Specify) (Specify) HF (Specify) 100H (Specify) 100w MH(Specify) (Specify) HF (Specify) 150H (Specify) 150w MH(Specify) (Specify) HF (Specify) 300Q E Only 300w qrtz.T-4 mini-can132

floodlytesWA3–VFWB3–VFHOUSING – One-piece aluminum die-casting. Integral cast hinge with stainless steel pinsis concealed internally and allows easy access for relamping. One-piece molded silicone gasketbetween the housing and door frame provides a long-lasting weathertight seal.DOOR FRAME – One-piece die-cast aluminum. WA3 – long shroud with tapered sidesis part of the door frame. Hinged door frame is secured to housing by four (4) stainless steelrecessed captive phillips-head screws.WA3 – Long shroud with tapered sides as part of the door frame. Hinged door frame is securedto the housing by four (4) stainless steel recessed captive phillips-head screws.Finish – Black, hand-rubbed verde antiqued over black thermoset powdercoat,bronze or white thermoset powdercoat.REFLECTOR – Formed from highly reflective hammertone aluminum and semi-specular kick plates.Reflector assembly is secured to the housing with four (4) stainless steel screws.LENS – 1/8” tempered glass and is sealed to the door frame with a one-piece molded siliconegasket and spring clips.SOCKET – Mounted directly onto the reflector assembly and are UL recognizedfor appropriate lamps, rated for 4 kv.ELECTRICAL COMPONENTS – Mounted directly to the housing and prewired with leadsextending from the swivel arm. All electrical components are UL, cUL recognized.BALLAST – Ballasts (HID) are regulating with power factors better than 90% (HPF).Ballasts shall provide +/- 5% lamp power regulation with +/- 10% input voltage regulation.MOUNTING – Aluminum die-cast. Locking teeth provide adjustment by tightening one (1)stainless steel recessed screw. 1/2-14” threaded nipple provides secure mounting.accessories – Accessories are available for this product.Please see Floodlyte Accessories Section on page 137.ETL, cETL Listed.133

Is o f o o t c a n d l e Co n v e r s io n sSetback or Mtg. HeightLamp Lumens 4’ 6’ 8’ 10’ 12’ 14’ 16’ 18’ 20’70w HPS 6400 2.5 1.11 .63 .40 .28 .20 .16 .12 .10100w HPS 9500 3.7 1.6 .93 .59 .41 .30 .23 .18 .15150w HPS 16000 6.3 2.8 1.6 1 .69 .51 .39 .31 .25250w HPS 27500 10.8 4.8 2.8 1.7 1.2 .88 .67 .53 .4370w MH 5500 2.1 .95 .54 .34 .24 .18 .13 .11 .09100w MH 7200 2.8 1.2 .70 .45 .31 .23 .18 .14 .11150w MH 14000 5.5 2.4 1.4 .88 .61 .45 .34 .27 .22250w MH 20500 8.1 3.6 2.1 1.3 .88 .65 .50 .40 .32300w Inc. 10450 4.1 1.8 1.0 .65 .45 .33 .25 .20 .16WA3-VF8-1/16"[205mm]11-3/16"[284mm]16-13/16"[427mm]9"[229mm]Ph o t o m e t r i c In f o r m a t io nWA3- vFHorizontal Flood w/ ShroudLamp Wattage 150W HPSSetback 10'Tilt 45º60Transverse Distance (ft.) Transverse Distance (ft.)402020Fixture40 20 0 20 40Longitudinal Distance (ft.)WB3-vFHorizontal Flood w/o ShroudLamp Wattage 150W HPSSetbackWB3-VF10'Tilt 45º8060402020Fixture40 20 0 20 40Longitudinal Distance (ft.)0011-3/16"[284mm]Transverse Distance (ft.) Transverse Distance (ft.)16-13/16"[427mm]8-1/16"[205mm]Lamp Wattage 150W HPSSetback 10'Tilt 45º60Fixture2040 20 0 20 40Longitudinal Distance (ft.)WB3-vFHorizontal Flood w/o ShroudLamp Wattage 150W HPSSetback 10'Tilt 45º805-11/16"[145mm]402060402020Fixture40 20 0 20 40Longitudinal Distance (ft.)00Or d e r i n g Gu i d eV voltageFinish(E) 120V(A) Black(F) 208VSeries (B) White Photo (G) 240VWA3 (G) Verde Optics Control (H) 277VWB3 (H) Bronze (Horiz. Flood) (Y or N) Wattage (K) 347V Wattage(Specify) (Specify) VF (Specify) 70S (Specify) 70w HPS(Specify) (Specify) VF (Specify) 100S (Specify) 100w HPS(Specify) (Specify) VF (Specify) 150S (Specify) 150w HPS(Specify) (Specify) VF (Specify) 250S* (Specify) 250w HPS(Specify) (Specify) VF (Specify) 70H (Specify) 70w MH(Specify) (Specify) VF (Specify) 100H (Specify) 100w MH(Specify) (Specify) VF (Specify) 150H (Specify) 150w MH(Specify) (Specify) VF (Specify) 250H* (Specify) 250w MH(Specify) (Specify) VF (Specify) 300Q E Only 300w qrtz.T-4 mini-can*250 watt ballast must be remote mounted.134

floodlytesWA3-HSWB3-HSHOUSING – One-piece aluminum die-casting. Integral cast hinge with stainless steel pinsis concealed internally and allows easy access for relamping. One-piece molded silicone gasketbetween the housing and door frame provides a long-lasting weathertight seal.DOOR FRAME – One-piece die-cast aluminum. WA3 – long shroud with tapered sidesis part of the door frame. Hinged door frame is secured to housing by four (4) stainless steelrecessed captive phillips-head screws.Finish – Black, hand-rubbed verde antiqued over black thermoset powdercoat,bronze or white thermoset powdercoat.REFLECTOR – Formed from highly reflective hammertone aluminum and semi-specular kick plates.Reflector assembly is secured to the housing with four (4) stainless steel screws.LENS – 1/8” tempered glass and is sealed to the door frame with a one-piece molded siliconegasket and spring clips.SOCKET – Mounted directly onto the reflector assembly and are UL recognizedfor appropriate lamps, rated for 4 kv.ELECTRICAL COMPONENTS – Mounted directly to the housing and prewired with leadsextending from the swivel arm. All electrical components are UL, cUL recognized.BALLAST – Ballasts (HID) are regulating with power factors better than 90% (HPF).Ballasts shall provide +/- 5% lamp power regulation with +/- 10% input voltage regulation.MOUNTING – Aluminum die-cast. Locking teeth provide adjustment by tightening one (1)stainless steel recessed screw. 1/2-14” threaded nipple provides secure mounting.accessories – Accessories are available for this product.Please see Floodlyte Accessories Section on page 137.ETL, cETL Listed.135

Is o f o o t c a n d l e Co n v e r s io n sSetback or Mtg. HeightLamp Lumens 10’ 15’ 20’ 25’ 30’ 35’ 40’70w HPS 6400 3.6 1.6 .91 .58 .40 .29 .22100w HPS 9500 5.4 2.4 1.3 .86 .59 .43 .32150w HPS 16000 9.1 4.0 2.3 1.5 1.0 .73 .55250w HPS 27500 16 6.9 3.9 2.5 1.7 1.2 .9470w MH 5500 3.1 1.4 .78 .50 .34 .25 .19100w MH 7200 4.1 1.8 1.0 .65 .45 .33 .25150w MH 14000 8.0 3.5 2.0 1.3 .88 .64 .48250w MH 20500 12 5.1 2.9 1.9 1.3 .93 .70300w Inc. 10450 5.6 2.6 1.4 .90 .60 .45 .35WA3-HS8-1/16"[205mm]11-3/16"[284mm]16-13/16"[427mm]9"[229mm]Ph o t o m e t r i c In f o r m a t io nWA3-HSHorizontal Spot w/ ShroudLamp Wattage 150W HPSSetback 30'Tilt 7-1/2º60Transverse Distance (ft.) Transverse Distance (ft.)3060Fixture60 30 0 30 60Longitudinal Distance (ft.)WB3-HSHorizontal Spot w/o ShroudLamp Wattage 150W HPSSetback WB3-HS 30'Tilt 7-1/2º603003060Fixture60 30 0 30 60Longitudinal Distance (ft.)03011-3/16"[284mm]Transverse Distance (ft.) Transverse Distance (ft.)16-13/16"[427mm]8-1/16"[205mm]Lamp Wattage 150W HPSSetback 30'Tilt 7-1/2º60Fixture6060 30 0 30 60Longitudinal Distance (ft.)WB3-HSHorizontal Spot w/o ShroudLamp Wattage 150W HPSSetback 30'Tilt 7-1/2º605-11/16"[145mm]303003060Fixture60 30 0 30 60Longitudinal Distance (ft.)030Or d e r i n g Gu i d eV voltageFinish(E) 120V(A) Black(F) 208VSeries (B) White Photo (G) 240VWA3 (G) Verde Optics Control (H) 277VWB3 (H) Bronze (Horiz. Flood) (Y or N) Wattage (K) 347V Wattage(Specify) (Specify) HS (Specify) 70S (Specify) 70w HPS(Specify) (Specify) HS (Specify) 100S (Specify) 100w HPS(Specify) (Specify) HS (Specify) 150S (Specify) 150w HPS(Specify) (Specify) HS (Specify) 250S* (Specify) 250w HPS(Specify) (Specify) HS (Specify) 70H (Specify) 70w MH(Specify) (Specify) HS (Specify) 100H (Specify) 100w MH(Specify) (Specify) HS (Specify) 150H (Specify) 150w MH(Specify) (Specify) HS (Specify) 250H* (Specify) 250w MH(Specify) (Specify) HS (Specify) 300Q E Only 300w qrtz. T-4 mini-can*250 watt ballast must be remote mounted.136

WA/WB Series accessoriesBARN DOORS (WB3 Only)Barn door assembly provides adjustable cutoff with hinged extruded aluminum baffle doors.Wire form mounts to pre-drilled door frame holes on the WB3 Floodlyte. Doors are lockedwith set screws and are individually removable. Not recommended in vandal prone areas.MW31Catalog No.MW31AMW31BMW31GMW31HFinishBlackWhiteVerdeBronzeMW32LEXAN SHIELDVandal shield is constructed of 1/8” clear convex UV stabilized injection molded polycarbonate.Shield mounts to pre-drilled door frame holes on the WA3 or WB3 Floodlyte. (Barn doorassembly may NOT be mounted over Lexan shield.) For use with 175W HID maximum.Catalog No.MW32DescriptionClear convex polycarbonate shieldMW33CYLINDRICAL J-BOXArchitecturally styled die-cast aluminum J-box for above grade installations. Large access coverallows easy entry into the splice compartment and for mounting a button eye photocell inthe cover. Photocell may be ordered factory installed or “knock-out” may be drilled in the fieldand photocell installed. One-piece molded neoprene cover gasket provides a water tight seal.Cover screws are captive and countersunk. Internal ground screw is provided. On top a 1/2”NPSM is provided for fixture mounting and on the bottom two (2) 1/2” NPT for conduit entry.Finish(A) Black(B) White(G) VerdeCatalog No. (H) Bronze DescriptionMW33 (Specify) Cylindrical J-BoxMW331 (Specify) Cylindrical J-Box w/120V Button-eye photocontrolMW332 (Specify) Cylindrical J-Box w/277V Button-eye photocontrolM0004 - 120V Button-eye photocontrol (field installation)M0005 - 277V Button-eye photocontrol (field installation)MW34WALL or CEILING CANOPY MOUNTFixture mounts to a cast aluminum mounting plat e and installs on standard 4” square or octagonalJ-box via galvanized steel plate. Fixture mounts with 1/2” stainless steel nipple and is lockedby turning two (2) stainless steel set screws. The aluminum canopy cover provides splice access.Catalog No.MW34-AMW34-BMW34-GMW34-HFinishBlackWhiteVerdeBronzeTM3TREE MOUNT J-BOXCast aluminum J-box for tree mount installations. Two (2) cast ears with holes allow easyinstallation with galvanized lag screws with hex nuts (provided) to mount the J-box awayfrom the tree surface. Front access cover allows easy entry into the splice compartment.On the front a 1/2” NPSM is provided for fixture mounting and four (4) 1/2” NPT equally spaced90º on the side for conduit entry. Fixture is mounted by turning two (2) stainless steel set screws.Catalog No.TM3-ATM3-BTM3-GTM3-HFinishBlackWhiteVerdeBronze137

PT21SINGLE POST TOP MOUNTOne-piece cast aluminum fitter for mounting a single fixture on a pole with a 2” pipe tenon.Fixture mounts with 1/2” stainless steel stud and is locked by turning two (2) stainless steelset screws. Fitter is secured to the pole with a 1/4”-20 allen set screw allowing 360º horizontaladjustment and has a removable top cap for splice access.Catalog No. FinishPT21-A BlackPT21-B WhitePT21-G VerdePT21-H BronzePT22TWIN POST TOP MOUNTOne-piece cast aluminum fitter for mounting two (2) fixtures on a pole with a 2” pipe tenon.Fixture mounts with 1/2” stainless steel stud and is locked by turning two (2) stainless steel setscrews. Fitter is secured to the pole with a 1/4”-20 allen set screw allowing 360º horizontaladjustment and has a removable top cap for splice access.Catalog No. FinishPT22-A BlackPT22-B WhitePT22-G VerdePT22-H BronzeSINGLE POST TOP MOUNT FOR 3” O.D. POLEOne-piece cast aluminum fitter for mounting a single fixture on a 3” O.D. pole. Fixture mountswith 1/2” stainless steel stud and is locked by turning two (2) stainless steel set screws.Fitter is secured to the pole with a 1/4”-20 allen set screw allowing 360º horizontal adjustment.PT23Catalog No.PT23-APT23-BPT23-GPT23-HFinishBlackWhiteVerdeBronzeSINGLE STANCHION MOUNT3” O.D. x 18” high extruded aluminum post (0.125” wall) with 1/2” NPSM fixture mount.Flush mount access cover allows easy access for wiring connections. Internal ground lug supplied.SS18Catalog No.SS18-ASS18-BSS18-GSS18-HFinishBlackWhiteVerdeBronze138

Line VoltageInground Lighting

Whether used to graze walls or uplight features, inground fixturesare powerful, versatile tools for expressing your design vision.They’ll deliver the illumination you need – yet blend seamlesslywith their surroundings. And our flush mount fixtures integrate so completely,people can even walk on them.With a generous selection of trim rings, rock guards, lenses and louvers,our ingrounds will harmonize with almost any terrain. And properly installed,they’ll provide years of light to your landscape.

ingroundsI2CompositeCompositeCast BronzeCast BronzeStainless SteelTrim RingRockguardTrim RingRock guardBRUSHED MATTE FINISHTrim RingHousing – Single-piece compression molded, fiberglass reinforced polyester composite housing.Trim Ring – Compression molded polyester, or die-cast stainless steel or natural cast bronze.Rock Guard – Directional for glare control. Compression molded polyester or natural cast bronze.Lens – Clear convex, tempered soda-lime glass for high impact resistance. 2,200-pound live-load rated, standard walk-over.Socket – PAR or R lamp: medium base. MR16: bi-pin type (GU5.3). PAR36/AR111: double screw terminal base. Fluorescent: GX24q-3 or GX24q-2 base.Electrical – Integral electronic transformer converts 120V to 12V; integral electronic fluorescent ballast.Aiming – MR16 and PAR36 lamps have 15º either side of vertical and 358º rotation. PAR/R 20 or 30 and fluorescent are not aimable.ADA Compliant – Compliant when used in concrete and flush mounted with CP2 or CPS2.ETL, cETL Listed.Ac c e s s o r i e sICG16Internal Snap-onHoneycombLouver.Lamp – MR16ICG20Internal Snap-onHoneycombLouver.Lamp – PAR20ICG30Internal Snap-onHoneycombLouver.Lamp – PAR30ICG36Internal Snap-onHoneycombLouver.Lamp – PAR36IBL1Exterior Ice BlueTempered Lens.IS1HCast AluminumExterior GlareShield.Finish –Bronze colorIBL16Internal SnaponIce BlueTemperedLens.Lamp – MR16ISL16Internal Snap-onSpread Lens.Lamp – MR16IAS16Internal LinearSpread Lens.Lamp – MR16CP2CPS2PVC ConcretePour Kit.8-1/4"[210mm]Stainless SteelConcretePour Kit.Fl u o r e s c e n tSection View6-5/8" 6-5/8"[169mm] [169mm]2-1/8"[54mm]Section View6-3/4" 6-5/8" 6-5/8"[171mm] [169mm]2-1/8"8-13/16" [54mm][224mm]2-1/8"[54mm]In c a n d e s c e n t1-1/2"[38mm]Lo w Vo l t a g e Wi t hIn t e g r a l Tr a n s f o r m e rPAR36.8-1/4"[210mm]Section View6-5/8"6-5/8"[169mm][169mm]2-1/4"[54mm]Lo w Vo l t a g e Wi t hIn t e g r a l Tr a n s f o r m e rMR16.8-1/4"[209mm]Section View6-5/8"[169mm]2-1/8"[54mm]1-1/2"[38mm]Bottom View5-1/2"[143mm]Two (2) 1/2” NPS ThreadedConduit inlets on bottom.8-1/4"[210mm]6[16141

Pr o d u c t Selection Gu i d e (In c a n d e s c e n t)CatalogNumber Description Finish Max Wattage Lamp socketI2-H Small Inground with Composite Trim Ring Bronze 100w PAR/R20 or PAR/R30 Medium BaseI2-N Small Inground with Cast Bronze Trim Ring Natural Cast Bronze 100w PAR/R20 or PAR/R30 Medium BaseI2-SS Small Inground with Stainless Steel Trim Ring Stainless Steel 100w PAR/R20 or PAR/R30 Medium BaseI2G-H Small Inground with Composite Rock Guard Bronze 100w PAR/R20 or PAR/R30 Medium BaseI2G-N Small Inground with Cast Bronze Rock Guard Natural Cast Bronze 100w PAR/R20 or PAR/R30 Medium BasePr o d u c t Selection Gu i d e (In t e g r a l 12V Tr a n s f o r m e r)CatalogNumber Description Finish Max Wattage Lamp SocketIT216-H Small Inground with Composite Trim Ring Bronze 75w MR16 GU5.3 Bi-Pin SocketIT216-N Small Inground with Cast Bronze Trim Ring Natural Cast Bronze 75w MR16 GU5.3 Bi-Pin SocketIT216-SS Small Inground with Stainless Steel Trim Ring Stainless Steel 75w MR16 GU5.3 Bi-Pin SocketIT216G-H Small Inground with Composite Rock Guard Bronze 75w MR16 GU5.3 Bi-Pin SocketIT216G-N Small Inground with Cast Bronze Rock Guard Natural Cast Bronze 75w MR16 GU5.3 Bi-Pin SocketIT236-H Small Inground with Composite Trim Ring Bronze 75w PAR36/AR111 Double Screw TerminalIT236-N Small Inground with Cast Bronze Trim Ring Natural Cast Bronze 75w PAR36/AR111 Double Screw TerminalIT236-SS Small Inground with Stainless Steel Trim Ring Stainless Steel 75w PAR36/AR111 Double Screw TerminalIT236G-H Small Inground with Composite Rock Guard Bronze 75w PAR36/AR111 Double Screw TerminalIT236G-N Small Inground with Cast Bronze Rock Guard Natural Cast Bronze 75w PAR36/AR111 Double Screw TerminalPr o d u c t Selection Gu i d e (Fl u o r e s c e n t)Catalog Max Minimum Op LampNumber Description Finish Wattage Lamp socket Temperature Life (Hrs)IF232-H Small Inground with Composite Trim Ring Bronze 32w Compact Fluorescent GX24q-3 - 20°F 10000IF232G-H Small Inground with Composite Rock Guard Bronze 32w Compact Fluorescent GX24q-3 - 20°F 10000IF226-H Small Inground with Composite Trim Ring Bronze 26w Compact Fluorescent GX24q-3 - 20°F 10000IF226G-H Small Inground with Composite Rock Guard Bronze 26w Compact Fluorescent GX24q-3 - 20°F 10000IF218-H Small Inground with Composite Trim Ring Bronze 18w Compact Fluorescent GX24q-2 - 20°F 10000IF218G-H Small Inground with Composite Rock Guard Bronze 18w Compact Fluorescent GX24q-2 - 20°F 10000IF232-N Small Inground with Cast Bronze Trim Ring Natural Cast Bronze 32w Compact Fluorescent GX24q-3 - 20°F 10000IF232G-N Small Inground with Cast Bronze Rock Guard Natural Cast Bronze 32w Compact Fluorescent GX24q-3 - 20°F 10000IF226-N Small Inground with Cast Bronze Trim Ring Natural Cast Bronze 26w Compact Fluorescent GX24q-3 - 20°F 10000IF226G-N Small Inground with Cast Bronze Rock Guard Natural Cast Bronze 26w Compact Fluorescent GX24q-3 - 20°F 10000IF218-N Small Inground with Cast Bronze Trim Ring Natural Cast Bronze 18w Compact Fluorescent GX24q-2 - 20°F 10000IF218G-N Small Inground with Cast Bronze Rock Guard Natural Cast Bronze 18w Compact Fluorescent GX24q-2 - 20°F 10000IF232-SS Small Inground with Stainless Steel Trim Ring Stainless Steel 32w Compact Fluorescent GX24q-3 - 20°F 10000IF226-SS Small Inground with Stainless Steel Trim Ring Stainless Steel 26w Compact Fluorescent GX24q-3 - 20°F 10000IF218-SS Small Inground with Stainless Steel Trim Ring Stainless Steel 18w Compact Fluorescent GX24q-2 - 20°F 10000142

ingrounds9 3/4˝[248 mm]4 1/16˝[104 mm]15 3/4˝[400 mm]i2.5Housing: Single-piece compression molded, fiberglass reinforced polyester composite housing.Separate sealed compartments. Potted factory seal with anti-wicking wiring. Hinged lens ring withcaptive lens and fasteners. Only 2 fasteners required to secure lens ring. UL Listed silicone-filled wirenuts provided–no encapsulant or conduit seal required.trim ring: Natural cast bronze or cast stainless steel. Secured with stainless steel screws.rock guard: Natural cast bronze or cast stainless steel. Secured with stainless steel screws.half dome: Field adjustable for directional glare control. Natural cast bronze or cast stainless steel.Secured with stainless steel screws7 1/2˝[191 mm]A1˝[25 mm]4 1/4˝[108 Ac mm] c e s s o r i e sCPS25Stainless steelconcretepour kitA1 9/16˝[40 mm]I25CRGNExternal castnatural bronzerock guard3 9/16˝[91 mm]Two (2) 3/4˝ NPT ThreadedConduit entry holes.Two (2) 3/4˝ NPT ThreadedConduit entry holes.I25CRGSSExternal caststainless steelrock guardI25HDNExternal castnatural bronzehalf domeLENS: Clear convex, tempered borosilicate for high-impact resistance. 3,000 lb live-loadrated, drive-over. Cool touch lens option for T4, T6 and E17 lamps reduces external lenstemperatures by up to 35%–includes internal clear (double) lens, internal ice blue lens,internal multi-directional spread lens and internal linear spread lens.gasket: Gaskets for lens and ballast assembly are single-piece molded 100% silicone. Gasket forjunction box cover is single-piece die-cut neoprene.socket: MH T-4: Bi-pin socket type (G8.5). MH T-6: Bi-pin socket type (G12). Incandescent,MH E-17 and PAR: 4kv rated medium base porcelain socket. Compact Fluorescent: GX24Q-4 base.IBLR*Internal iceblue lens forreflectors(Lamp: T-4,T-6 or E-17)IMSLR*Internal multidirectionalspread lens forreflectors(Lamp: T-4, T-6or E-17)ILSLR*Internal linearspread lens forreflectors(Lamp: T-4, T-6or E-17)ICGR†Internalhoneycomblouver forreflectors(Lamp: T-4, T-6or E-17)Reflector: Handle enables easy tool-less removal for hot aiming and re-lamping.High-performance aluminum reflector for optimum symmetrical light output. MH T-4 and T-6:Available for spot, narrow flood or flood beam pattern. MH E-17: Available for spot or flood beampattern. Compact Fluorescent: Available in flood only.electrical : HID and CFL: Key-slotted Ballast Assembly with Quick Disconnects mounted tocast aluminum bracket for easy maintenance. Universal Smart Select TM electronic ballasts automaticallydetect 120-277 volts, 50/60 Hz, HPF. Ballasts provide ± 5% lamp power regulation with ± 10% inputvoltage regulation.I25HDSSExternal caststainless steel halfdomeI25SRLExternal slipresistantlensI25FRLExternal frostedlensICLR*Internal clear(double) lensfor reflectors(Lamp: T-4,T-6 or E-17)AIMING: 15° either side of vertical and full 360° rotation. Angle degree marks for precise verticalaiming with tool-less LOC-AIM ® .ADA COMPLIANT: Compliant when used in concrete and flush-mounted with CPS25.IP RATING: IP66/68 to 1M (3.28FT): Dust-tight and dual rated–sealed against direct jets of waterand against continuous immersion up to a depth of 1 meter (3.28 feet).ETL, cETL Listed.IDLR†Internal directionallouver,laser cut, forreflectors(Lamp: T-4, T-6or E-17)ISSR†Internal sourceshield forreflectors(Lamp: T-4, T-6or E-17)ICG20Internal snap-onhoneycomblouver(Lamp: PAR20)Not for usewith anyother internalaccessoryICG30Internal snap-onhoneycomblouver(Lamp: PAR30)Not for usewith anyother internalaccessoryNOTE: For internal accessories ICLR, IBLR, IMSLR, ILSLR, ICGR, IDLR and ISSR: 50W E-17, 35W T-4/T-6 and 20W T-4 = Use multiple internal accessories with any external lens(Example: IBLR + ILSLR + ICGR + I25FRL)70W T-4/T-6/E-17 = Use (1) internal lens* and (1) internal glare control † accessory with the standard external clear lens or the external slip-resistant lens; when using external frosted lens,use no accessories (Example: ICLR + ICGR + I25SRL) CFL, HID PAR, INC PAR = ICLR, IBLR, IMSLR, ILSLR, ICGR, IDLR and ISSR can not be used143

Ph o t o m e t r i c In f o r m a t io n (70W Me t a l Ha l i d e) Wa l li2.5 T4 Spot, 2´ Setback, 5° Tilti2.5 T6 Spot, 2´ Setback, 5° Tilt.1.1Transverse Distance (ft.)604020.25.5125 1020Transverse Distance (ft.)6030.25.5125102040 20 0 20 40Longitudinal Distance (ft.)30030Longitudinal Distance (ft.)i2.5 T4 Narrow Flood, 2´ Setback, 5° Tilti2.5 T6 Narrow Flood, 2´ Setback, 5° TiltTransverse Distance (ft.)604020.1.25.512Transverse Distance (ft.)6030.1.25.5125 10205102040 20 0 20 40Longitudinal Distance (ft.)Or d e r i n g Gu i d e (Fl u o r e s c e n t)30030Longitudinal Distance (ft.)See page 20for LED models.Catalog NumberFinish(N) Natural Cast Bronze(SS) Stainless SteelOptics(FL) Flood Wattage* Socket*Minimum OperatingTemperature Lamp Life (Hours)I25 ( ) FL 42PLT GX24q3/GX24q-4 -18°F 10,000† All CFL electronic ballasts are Smart Select TM universal voltage 120-277VAC 50/60Hz and will operate 26W, 32W or 42W lamps.* Universal CFL socket will accept 26W and 32W GX24q-3 and 42W GX24q-4 lamps.Or d e r i n g Gu i d e (In c a n d e s c e n t)Catalog Number Description FinishMaxWattage* Lamp SocketI25-N Hinge top ingrade with natural cast bronze trim ring Natural cast bronze 100W PAR/R20 or PAR/R30 Medium baseI25-SS Hinge top ingrade with stainless steel trim ring Stainless steel 100W PAR/R20 or PAR/R30 Medium baseOr d e r i n g Gu i d e (HID)Catalog NumberFinish(N) Natural Cast Bronze(SS) Stainless SteelOptics(SP) Spot(NF) Narrow Flood(FL) Flood(0) No Reflector (PAR/R lamps Wattage* Wattage/LampI25 ( ) (SP, NF, FL) 20T4 20W Metal Halide T-4, Bi-pin G-8.5I25 ( ) (SP, NF, FL) 35T4 35W Metal Halide T-4, Bi-pin G-8.5I25 ( ) (SP, NF, FL) 70T4 70W Metal Halide T-4, Bi-pin G-8.5I25 ( ) (SP, NF, FL) 35T6 35W Metal Halide T-6, Bi-pin G-12I25 ( ) (SP, NF, FL) 70T6 70W Metal Halide T-6, Bi-pin G-12I25 ( ) 0 35H 35W Metal Halide PAR20/30, Medium BaseI25 ( ) (SP, FL) 50H 50W Metal Halide E-17, Medium BaseI25 ( ) (SP, FL, 0) 70H 70W Metal Halide E-17, PAR30, Medium Base† All HID electronic ballasts are Smart Select TM universal voltage 120-277VAC 50/60Hz.144

ingroundsI3CompositeTrim RingCompositeRockguardCAST BRONZETrim RingCast BronzeRock guardStainless SteelBRUSHED MATTE FINISHTrim RingHousing – Single-piece compression molded, fiberglass reinforced polyester composite housing.Trim Ring – Compression molded polyester, or die-cast stainless steel, or natural cast bronze. All trim rings are secured with stainless steel screws.Rock Guard – Directional for glare control. Compression molded polyester or natural cast bronze.Lens – Clear convex, tempered soda-lime glass for high impact resistance. 2,200-pound live-load rated, standard walk-over.Gasket – Single-piece molded silicone U-channel.Socket – Incandescent and HID: medium base. Fluorescent: GX24q-3 or GX24q-4 base.Reflector – Optional specular aluminum spun reflector available for E17 spot (15°) or flood (70°) beam pattern. Fluorescent available in flood.Electrical – Standard quad-volt core and coil mounted on key-slotted removable tray with quick connect harness, high power factor,dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts.Aiming – 15° either side of vertical and 358° rotation. PAR/R and fluorescent are not aimable.ADA Compliant – Compliant when used in concrete and flush mounted with CP3 or CPS3.ETL, cETL Listed.Ac c e s s o r i e sCP3PVC ConcretePour Kit.CPS3Stainless SteelConcretePour Kit.ICG20Internal Snap-onHoneycombLouver.Lamp – PAR20ICG30Internal Snap-onHoneycombLouver.Lamp – PAR30ICG36Internal Snap-onHoneycombLouver.Lamp – PAR36ICG38Internal Snap-onHoneycombLouver.Lamp – PAR38I3ICLInternal Clear(Double) Lens.IS3HCast AluminumExterior Glare Shield.Finish – BronzeI3 With Trim Ring(Section View)I3 With Rock Guard(Section View)Bottom View8-1/10" 8-1/10"[210mm] [210mm]9-5/8" 9-5/8"[244mm] [244mm]9-5/8" 9-5/8"[244 mm] [244 mm]8-1/10"[210mm]9-5/8"[244mm]11-1/2" 11-1/2"[295mm] [295mm]1-7/8" 1-7/8"[48mm] [48mm] 1-9/16" 1-9/16"[40mm] [40mm]12-3/8" 12-3/8"[315 mm] [315 mm]1-7/8"[48mm]1-9/16"[40mm]11-1/2"[295mm]12-3/8[315 mmTwo (2) 3/4” NPS ThreadedConduit inlets on bottom.145

???Ph o t o m e t r i c In f o r m a t io n (100W Me t a l Ha l i d e)Fl o o d (Wa l l) 2’ s e t b a c k, 5˚ t i l tSp o t (Wa l l) 2’ s e t b a c k, 5˚ t i l tTransverse Distance (ft.)80604020.05?.662914Transverse Distance (ft.)80604020.06.152960 40 20 0 20 40 6060402020 40 60Longitudinal Distance (ft.)Longitudinal Distance (ft.)Fl o o d (Ca n o p y) 30’ s e t b a c kSp o t (Ca n o p y) 30’ s e t b a c kTransverse Distance (ft.)603003060.05 .1.3 .6Transverse Distance (ft.)6030030601 3.05 6.1 .3 .660 30 0 30 60Longitudinal Distance (ft.)60 30 0 30 60Longitudinal Distance (ft.)Pr o d u c t Selection Gu i d e (In c a n d e s c e n t)CatalogNumber Description Finish Max Wattage Lamp socketI3-H Medium Inground with Composite Trim Ring Bronze 100w PAR/R30 or PAR38/R40 Medium BaseI3G-H Medium Inground with Composite Rock Guard Bronze 100w PAR/R30 or PAR38/R40 Medium BaseI3-N Medium Inground with Cast Bronze Trim Ring Natural Cast Bronze 100w PAR/R30 or PAR38/R40 Medium BaseI3G-N Medium Inground with Cast Bronze Rock Guard Natural Cast Bronze 100w PAR/R30 or PAR38/R40 Medium BaseI3-SS Medium Inground with Stainless Steel Trim Ring Stainless Steel 100w PAR/R30 or PAR38/R40 Medium BaseOr d e r i n g Gu i d e (HID)opticsFinish (FL) Flood (70°)(G) Optional Rock Guard (H) Bronze (H) Horizontal (78º-100º) VoltageCatalog (available in composite (N) Natural Cast Bronze (SP) Spot (15°) 120, 208Number bronze or cast bronze only) (SS) Stainless Steel (O) No Reflector (PAR/R lamps) Wattage 240, 277 Wattage/LampI3 (G) (Specify) O 35H (Specify) 35w Metal Halide PAR20, Medium BaseI3 (G) (Specify) (FL, H, SP) 35TH (Specify) 35w Metal Halide T6, Bi-pinI3 (G) (Specify) (FL, SP) 50H (Specify) 50w Metal Halide E17, Medium BaseI3 (G) (Specify) (Specify) 70H (Specify) 70w Metal Halide E17, PAR30, Medium BaseI3 (G) (Specify) (FL, H, SP) 70TH (Specify) 70w Metal Halide T6, Bi-pinI3 (G) (Specify) (Specify) 100H (Specify) 100w Metal Halide E17, PAR38, Medium BaseI3-HHO*Housing OnlyOr d e r i n g Gu i d e (Fl u o r e s c e n t)Finish(G) Optional Rock Guard (H) BronzeVoltageCatalog (available in composite (N) Natural Cast Bronze Optics 120, 208 Minimum Op LampNumber bronze or cast bronze only) (SS) Stainless Steel (FL) Flood Wattage 240, 277 Socket Temperature Life (Hrs)I3 (G) (Specify) FL 26PLT (Specify) GX24q-3 - 20°F 10000I3 (G) (Specify) FL 32PLT (Specify) GX24q-3 - 20°F 10000I3 (G) (Specify) FL 42PLT (Specify) GX24q-4 - 20°F 10000*When housing only is ordered for pre-shipment, add suffix “LH” (Less Housing) to complete catalog number to order fixture without housing.146

ingroundsI4CompositeTrim RingCompositeRockguardCAST BRONZETrim RingCast BronzeRock guardStainless SteelBRUSHED MATTE FINISHTrim RingHousing – Single-piece compression molded, fiberglass reinforced polyester composite housing. Re-enterable compound provided to seal junction.Trim Ring – Compression molded polyester, or die-cast stainless steel, or natural cast bronze. All trim rings are secured with stainless steel screws.Rock Guard – Directional for glare control. Compression molded polyester or natural cast bronze.Lens – Clear convex, tempered soda-lime glass for high impact resistance. 2,600-pound live-load rated, standard walk-over.Gasket – Single-piece molded silicone U-channel.Socket – Incandescent and HID: medium base. Fluorescent: GX24q-3 or GX24q-4 base.Reflector – Optional specular aluminum spun reflector available for E17 spot (15º) or flood (70º) beam pattern. Hammertone aluminum for horizontal(78º-100º) beam pattern. Fluorescent available in flood or horizontal only.Electrical – HID: standard quad-volt core and coil mounted on key-slotted removable tray with quick connect harness, high power factor,dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts.Aiming – 15º either side of vertical and 358º rotation.ADA Compliant – Compliant when used in concrete and flush mounted with CP4 or CPS4.ETL, cETL Listed.Ac c e s s o r i e sCP4PVC ConcretePour Kit.CPS4Stainless SteelConcretePour Kit.ICG38Internal Snap-onHoneycombLouver.Lamp – PAR38ICGFLInternalHoneycombLouver for FLreflector.Lamp – EL17 orPLT LampICGSPInternalHoneycombLouver for SPreflector.Lamp – EL17I4SRLExternal SlipresistantLens.I4ICLInternal Clear(Double) Lens.I4IDLInternalDirectionalLouver, LaserCut.ISL4Internal MultidirectionalSpread Lens.IS4HCast Aluminumexterior GlareShield.Finish – BronzeI4 With Trim Ring(Section View)I4 With Rock Guard(Section View)Bottom View10-3/4"[279mm]12- 1/4"[3 10mm]12- 1/4"[3 10mm]10-3/4"[279mm]12- 1/4"[3 10mm]1-9/16"[40mm] 2-3/4"[170mm]14"[354mm]1-9/16"[40mm] 2-3/4"[170mm]Two (2) 3/4” NPS ThreadedConduit inlets on bottom.14[354m147

???Ph o t o m e t r i c In f o r m a t io n (150W Me t a l Ha l i d e)Fl o o d (Wa l l) 2’ s e t b a c k, 5˚ t i l tSp o t (Wa l l) 2’ s e t b a c k, 5˚ t i l tHo r i z o n t a l (Wa l l) 2’ s e t b a c k, 5˚ t i l tTransverse Distance (ft.)80604020.1? 1.25105060 40 20 0 20 40 60Transverse Distance (ft.)806040206040.120.255020 40 60Transverse Distance (ft.)80604020?1.1.255060 40 20 0 20 40 60Longitudinal Distance (ft.)Longitudinal Distance (ft.)Longitudinal Distance (ft.)Fl o o d (Ca n o p y) 30’ s e t b a c kSp o t (Ca n o p y) 30’ s e t b a c kHo r i zo n t a l (Ca n o p y) 30’ s e t b a c kTransverse Distance (ft.)603003060.1 .2.5 1Transverse Distance (ft.)603003060.1.2 .52 5101Transverse Distance (ft.)603003060.21 .5.160 30 0 30 60Longitudinal Distance (ft.)60 30 0 30 60Longitudinal Distance (ft.)60 30 0 30 60Longitudinal Distance (ft.)Pr o d u c t Selection Gu i d e (In c a n d e s c e n t)CatalogNumber Description Finish Max Wattage Lamp socketI4-H Large Inground with Composite Trim Ring Bronze 150w PAR38/R40 Medium BaseI4G-H Large Inground with Composite Rock Guard Bronze 150w PAR38/R40 Medium BaseI4-N Large Inground with Cast Bronze Trim Ring Natural Cast Bronze 150w PAR38/R40 Medium BaseI4G-N Large Inground with Cast Bronze Rock Guard Natural Cast Bronze 150w PAR38/R40 Medium BaseI4-SS Large Inground with Stainless Steel Trim Ring Stainless Steel 150w PAR38/R40 Medium BaseOr d e r i n g Gu i d e (HID)OpticsFinish (FL) Flood (70º)(G) Optional Rock Guard (H) Bronze (H) Horizontal (78º–100º) VoltageCatalog (available in composite, (N) Natural Cast Bronze (SP) Spot (15º) 120, 208Number bronze or cast bronze only) (SS) Stainless Steel (O) No Reflector (for PAR lamps) Wattage 240, 277 Wattage/LampI4 (G) (Specify) (FL, SP, H) 50S (Specify) 50w High Pressure Sodium E17I4 (G) (Specify) (FL, SP, H) 70S (Specify) 70w High Pressure Sodium E17I4 (G) (Specify) (FL, SP, H) 100S (Specify) 100w High Pressure Sodium E17I4 (G) (Specify) (FL, SP, H) 150S (Specify) 150w High Pressure Sodium E17I4 (G) (Specify) (FL, SP, H) 50H (Specify) 50w Metal Halide E17I4 (G) (Specify) (Specify) 70H (Specify) ??? 70w Metal Halide E17, PAR38I4 (G) (Specify) (FL, SP, H) 70TH (Specify) 70w Metal Halide T6????????????????I4 (G) (Specify) (Specify) 100H (Specify) 100w Metal Halide E17, PAR38I4 (G) (Specify) (FL, SP, H) 150H (Specify) ?????????150w Metal Halide E17I4 (G) (Specify) (FL, SP, H) 150TH (Specify) ?????????????150w Metal Halide T6I4-HHO* Housing Only?? ???????????????Or d e r i n g Gu i d e (Fl u o r e s c e n t)Finish(G) Optional Rock Guard (H) Bronze Optics VoltageCatalog (available in bronze (N) Natural Cast Bronze (FL) Flood 120, 208 Minimum Op LampNumber or cast bronze only) (SS) Stainless Steel (H) Horizontal Wattage 240, 277 Socket Temperature Life (Hrs)I4 (G) (Specify) (Specify) 26PLT (Specify) GX24q-3 - 20ºF 10000I4 (G) (Specify) (Specify) 32PLT (Specify) GX24q-3 - 20ºF 10000I4 (G) (Specify) (Specify) 42PLT (Specify) GX24q-4 - 20ºF 10000*When housing only is ordered for pre-shipment, add suffix “LH” (Less Housing) to complete catalog number to order fixture without housing.148

ingroundsI5Housing – Single-piece, compression molded, fiberglass-reinforced polyester composite with integral lamp, ballast and junction box compartmentwith epoxy anti-siphon barrier.Top Plate, Lens Frame – Dark bronze compression molded polyester; secured with stainless steel screws.Lens – 3/8” thick clear, high-impact tempered glass; crowned and mounted flush with lens retainer to resist debris accumulation;1,300-pound live-load rated, standard walk-over lens.Gasket – Single-piece, molded, ribbed silicone for lens and top plate to provide watertight sealing stem.Socket – Pulse-rated, heavy-duty glazed porcelain for medium and mogul base lamp. Porcelain mogul-end prong socket provided for PAR56 lamp.Reflector – E17, E28 and T15 vertical lamp specular spun aluminum; reflector for E17 horizontal lamp is combination of hammertoneand specular-formed aluminum. Lamp not included.Electrical – HID models: core and coil, high power factor; epoxy dipped for moisture resistance.Aiming – 360º horizontal rotation adjustment. E17, E28, and T15 vertical lamps: 15º adjustment either side of vertical.E17 horizontal and PAR56 lamps: 25º vertical adjustment. PAR38 and R40 lamps: 30º vertical adjustment.ADA Compliant – Compliant when used in concrete and flush mounted with concrete mounting frame I5CMF.ETL, cETL Listed.Ac c e s s o r i e sI5CMFI5CRGI5SRGI5HCLI5DSI5IGLI5DLI5DSGConcreteMountingFrame.External CastRock Guard.Finish – DarkBronzeAluminumExternalStainlessWire Guard.InternalHoneycombLouver.Lamp – E17ExternalDirectionalShield.Finish – DarkBronzeAluminumInternal GlareLouver.InternalDirectionalLouver.ExternalDirectional Shieldand Rock Guard,Dark BronzeAluminum.149

Section ViewPh o t o m e t r i c In f o r m a t io n12-1/4"19-5/16"[491mm]Bottom View4-1/2"[114mm]14SB13SB12SB11SB10SB9SB8SB7SB6SB5SB4SB3SB2SB1SB0SB1510202.55010010SB9SB8SB7SB6SB5SB4SB3SB2SB1SB0SB210015102050.512-1/8"[311mm]1-29/32"[48mm]9-1/2"[241mm]1-29/32"[48mm]4-1/2"[114mm]8SB6SB4SB2SB0SBI5HFL175H120 SymmetricSetback = 2 ft.2SB4SB6SB8SBMultipliers for other SetbacksSetback (Ft.) 2’ 3’ 4’ 5’ 6’ 8’150w MH E17 Coated 1 .44 .25 .16 .11 .06250w MH E28 Coated 1.5 .66 .38 .24 .17 .09Note: Fixture aimed 15° toward wall.6SB4SB2SB0SBI5HSP100S120 SymmetricSetback = 3 ft.2SB4SB6SBMultipliers for other SetbacksSetback (Ft.) 2’ 3’ 4’ 5’ 6’ 8’70w HPS B17 1.5 .67 .38 .24 .17 07100w HPS B172.25 2.25 1 .56 .36 .25 .11150w HPS B173.8 3.8 1.7 .95 .61 .43 .19Note: Fixture aimed 15° toward wall.Or d e r i n g Gu i d eOpticsvoltage(FL) Flood 120(H) Horizontal 208Catalog (SP) Spot 240Number (H) Dark Bronze Composite (O) No Reflector (for PAR lamps) Wattage 277 Wattage/LampI5 H (FL, SP, H) 35S (Specify) 35w High Pressure Sodium E17I5 H (FL, SP, H) 50S (Specify) 50w High Pressure Sodium E17I5 H (Specify) 70S (Specify) 70w High Pressure Sodium E17I5 H (FL, SP, H) 100S (Specify) 100w High Pressure Sodium E17I5 H (FL, SP, H) 150S (Specify) 150w High Pressure Sodium E17I5 H (FL, SP) 250S (Specify) 250w High Pressure Sodium E28I5 H O 35H (Specify) 35w Metal Halide PAR20I5 H (FL, SP, H) 50H (Specify) 50w Metal Halide E17I5 H (Specify) 70H (Specify) 70w Metal Halide E17, PAR38I5 H (Specify) 100H (Specify) 100w Metal Halide E17, PAR38I5 H (Specify) 150H (Specify) 150w Metal Halide E17I5 H (FL, SP) 250H (Specify) 250w Metal Halide S-T15, F-E28I5 H O 300I 120 Up to 300w Incandescent PAR38, R40I5 H O 500I 120 Up to 500w Incandescent PAR56150

LINE VOLTAGE INGROUNDInstallation of inground fixtures requires special consideration. Proper grading, drainage material and potting of internal wires are proceduresthat are key to a successful inground installation. The following are basic steps in installing inground fixtures in either concrete (using the concretepour accessory) or soil installation. For greater detailed instructions, refer to the installation sheet enclosed with each fixture.C o n c r e t e In s t a l l a t i o n (I4 Shown)NOTE: To ensure proper drainage, prepare gravel foundation, make certain that the concrete level, when poured, will be flush with the top of the concrete pour accessory.1. Remove trim ring and all internal components from fixture housing, except for the moisture absorbing dessicant pack attached to the sideof the housing. Set aside.2. Position the fixture housing into the concrete pour accessory, making sure that the underside of the housing flange rests on top of the set screws. Tighten setscrews on side of accessory to lock the housing into place (do not over-tighten). Secure assembly to the final location with re-bar or other anchoring device.3. Excavate soil where the fixture is to be installed. Dig a trench 18” deep for conduit installation.4. Place assembly into hole. Be sure there is a minimum of three 3” of drainage material (sand or gravel only) covering the bottom of the hole.5. Install the conduit to housing using a watertight fitting (by others), and pull supply wires through into housing.6. Press duct seal compound (by others) into wire entryway, and then fill the entire entryway with two-part potting compound(supplied with select fixtures) to seal the conduit entry point from moisture.7. Place the dirt cover on the fixture to prevent gravel and concrete from falling into the fixture housing.8. Fill area with a minimum of three 3” of drainage material. Be sure not to fill area flush with top of frame and assembly. This is to be filled with concrete.9. Pour concrete. Remember that fixture position cannot be altered after the concrete sets.10. Once the concrete has set and is completely cured, remove dirt cover from fixture and install electrical components. Use silicone wire nuts(by others) to connect supply wire to fixture wire, within housing.11.Install specified lamp, and then replace gasketed lens, making certain there is no debris between the gasket and the housing. Install trim ringor rock guard per installation instructions.12. Connect fixture to power source and energize.Concrete151Wires must be connected with silicone wirenuts and compartment must be potted.

I n s t a l l a t i o nG r o u n d In s t a l l a t i o n (I4 Shown)NOTE: Do not place fixture in a below grade location as the fixture will become a sump, collecting dirt and debris, and possibly become submergedin extremely wet conditions. Do not place plantings too close to the fixture as the foliage may grow over the luminaire, blocking the light.Do not allow mulch to touch inground fixture in any way as this may cause the fixture to overheat and fail.1 . Excavate soil for fixture placement and conduit runs, making sure the fixture will be elevated and the grade sloped down from the fixture.Be certain to allow a minimum of three 3” of drainage material (sand or gravel only) under and around the housing.2. Remove trim ring and all internal components from fixture housing, except for the moisture absorbing dessicant pack attachedto the side of the housing. Set aside.3. After drainage material is installed in the bottom, place fixture housing into hole, back-filling a minimum of 3” of drainage material(sand or gravel only) around the side of the housing. Be certain that the underside of housing flange rests on top of grade level.4. Install the conduit to housing using a watertight fitting (by others) and pull supply wires through, into housing.5. Press duct seal compound (by others) into wire entryway, and then fill the entire entryway with two-part potting compound(supplied with select fixtures) to seal the conduit entry point from moisture.5186. Re-install ballast tray. Use silicone wire nuts (by others) to connect supply wireto fixture wire within housing.7. Re-install balance of electrical components. Plug lamping module into quick connect, if applicable.3 48. Install specified lamp, and then replace gasketed lens, making certain there is no debrisbetween the gasket and the housing. Install trim ring or rock guard per installation instructions.9. Connect fixture to power source and energize.762Order in which to tighten screws.DrainageGravel(3” minimum)152

Line VoltagestepLytes

SteplytesRSB2 PolycarbonateRSf2 PolycarbonateHousing – Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concreteor masonry applications.Trim Ring – Die-cast aluminum trim contains less than 0.3% copper to resist corrosion.Finish – Zinc-rich primer and thermoset powdercoat for durability Polycarbonate parts are color impregnated.Bubble Lens – UV stabilized injection molded polycarbonate, partially clear for maximum light output.Opal Faceplate – UV stabilized injection molded polycarbonate with frosted glass siliconed on inside for durability.Louver Screen Faceplate – Clear UV stabilized injection molded polycarbonate with 45º louvered screen insert.Socket – Single contact bayonet (S-8), medium, G23, GX23-2 base (120 volt) or G24Q-1 base (277 volt)Ballast – Fluorescent ballasts are core and coil, NPF Class B, factory wired and tested, rated for 0º C starting temperature.Integral 120/12V transformer is electronic.Wiring – Pre-wired with high temperature #18 wire.ADA Compliant – Compliant when used in indoor and outdoor wall applications.ETL, cETL Listed.RSs2 PolycarbonateAc c e s s o r i e sCatalog Number DescriptionMAKMMasonry Construction Mounting KitMAKNSNew Stud Wall Construction Mounting KitMAKESExisting Stud Wall Construction Mounting KitNote: All units supplied with mounting hardware for concrete pour installation. If other mounting kits are required, order accessory above.155

11/16"[17mm][229mm]1-3/8"[34mm]11/16"[17mm][229mm]1-3/8"[34mm]3-1/2"[89mm]ISO Fo o t c 3-1/2" a n d l e Co n v e r s io n s[89mm]5/8" Mounting HeightLight Source [16mm] 2’ 2.5’ 3’ 4’PL9 (9w) 5/16" 2.55 1.63 1.13 .63PL13 (13w) [8mm] 3.83 2.45 1.70 .95T10 (40w) 1.87 1.20 .83 .461141 (36w) 2.25 1.44 1.00 .563-1/2"RSF2 & RSS2 – Symmetric reflector is precision formed steel 3-1/2" [89mm]with a white reflective coating. The opal lens of the RSF2 offers [89mm]light levels for stairways and area lighting, or as a marker9"9"[229mm]9"light source where shielding of the light source [229mm] is 9" less important.[229mm] 9"The internal louver 1-3/8" of the RSS2 offers11/16"lower 11/16" [229mm] light levels 1-3/8"1-3/8" [229mm][35mm]11/16"1-3/8"4-1/16" 11/16"[17mm]11/16"with cut off for lighting stairways or [17mm] general light ing where 1-3/8" [34mm] shielding [17mm][34mm]11/16"1-3/8"[17mm][34mm]of the light source is more important [103mm] [17mm] than high light levels. [34mm][17mm][34mm]RSB2 – Symmetric reflector8-1/8"is precision formed, semi-specular 2-11/16"2-11/16" 2-11/16"[207mm]2-11/16" [68mm][68mm]aluminum or highly polished aluminum (T10 lamping only),2-11/16" [68mm][68mm] which[68mm]produces a wide symmetric distribution 3-1/2" for general area lighting. 3-1/2"3-1/2"3-1/2" [89mm][89mm] 3-1/2" [89mm][89mm] 5/8"5/8" [89mm] 5/8"[16mm] 5/8"[16mm] [16mm] 5/8"RSB25/16" [16mm] RSF2 5/16" RSS21/4"[16mm]Front View 5/16" [8mm] Front View [8mm]1/4" [7mm] Front View[8mm][7mm]11/16"1-3/8"3-1/2"[17mm] 3-1/2" [34mm][89mm][89mm]3-1/2" 3-1/2"[89mm] [89mm]2-11/16"9"9"9"[68mm] 9" 1-3/8"11/16"[229mm][229mm][229mm] 9" [229mm] [35mm][17mm]9" 9"11/16" 9" 1-3/8" 9" 3-1/2"1-3/8"4-1/16"[229mm][229mm] 11/16"[229mm]11/16"Side [229mm] View1-3/8" 1-3/8"[17mm]11/16" [34mm] [229mm] [89mm][34mm]1-3/8" [35mm][17mm]11/16"1-3/8"1-3/8"[34mm]Side View[103mm]Side11/16"1-3/8"[17mm] View11/16" [17mm]1-3/8"4-1/16"11/16"1-3/8" 5/8"[17mm]1-3/8" [34mm]8-1/8"[34mm] [35mm][17mm] [103mm][17mm]11/16"11/16"[17mm] [34mm]4-1/16"[34mm] [34mm] [16mm] [34mm][207mm][17mm] 2-11/16" [17mm] 1/2"2-11/16"2-11/16" 8-1/8" [103mm][68mm] [12mm]2-11/16" [68mm]2-11/16" 2-11/16" [68mm] [207mm] 8-1/8"2-11/16" 2-11/16"2-11/16" [68mm][68mm] [68mm]3-1/2"[207mm] 3-1/2"[68mm] [68mm] 3-1/2" [68mm][89mm]3-1/2" [89mm]3-1/2" 1" 3-1/2"[89mm]3-1/2" 5/8" 3-1/2"3-1/2" [89mm]5/8"[89mm] [26mm] [89mm] 5/8"[89mm] [16mm] [89mm][89mm] 5/8" [16mm]5/8" [16mm] 5/8"5/16" 5/8" 5/8"[16mm] 5/8" 1/4"[16mm] [16mm][8mm] [16mm] [16mm] 5/16" [16mm] [7mm]5/16" 5/16"1/4" 1/4"5/16" [8mm]3-1/2"[8mm] [8mm][7mm] [7mm][8mm][89mm]See page 2211/16"1-3/8"for LED models.3-1/2"[17mm]1-3/8" [34mm]11/16"Or d e r i n g Gu i d 3-1/2" [89mm] e[17mm][34mm] 9"[89mm]2-11/16" [229mm]Finish Voltage Insulation9"Catalog (A) Black Sym 9" Optics (E) 120 Detector[68mm][229mm] 11/16" 2-11/16" 1-3/8"Number (H) Bronze [229mm] 9" K5, L5 or T5 9" Lamping 9" (H) 277 (P)** Wattage [68mm]1-3/8" [229mm] 11/16"3-1/2"[17mm] Socket [34mm]RSB2 (Specify) [229mm]1-3/8"11/16"T5[35mm]1-3/8" F13 [229mm] (Specify) n/a[17mm]11/16" [89mm] 13w PLC13 GX23-2, G24Q-1RSB2 1-3/8"11/16"[34mm]3-1/2"4-1/16"[34mm]1-3/8" (Specify) [17mm]1-3/8"1-3/8"[17mm]11/16" 11/16"T5 I E (Specify) 40w 5/8" T10 Medium[35mm][17mm]11/16"1-3/8"[89mm]2-11/16"RSF2 [35mm] (Specify) [34mm] [103mm]4-1/16" [17mm] [17mm] L5 11/16" F13[17mm][34mm] (Specify) [16mm]4-1/16"[34mm] n/a 13w 5/8" PLC13 GX23-2, [68mm] G24Q-1RSF2 (Specify) L5 8-1/8"[17mm]1/2"[103mm] [103mm]2-11/16"F9 (Specify) n/a 9w [16mm] PL9 2-11/16" G23RSF2 (Specify) L5 [207mm][12mm][68mm] I E (Specify) 1/2" 40w T10 [68mm] 3-1/2" MediumRSF2 8-1/8" (Specify) 8-1/8"L52-11/16"8* 2-11/16" E 2-11/16" (Specify) [12mm] 1" (2) 18w 1141[89mm](120/12) Single Contact Bayonet[207mm] [207mm] 3-1/2"[68mm]RSS2 (Specify) K5 F13 [68mm] E [68mm] n/a 3-1/2" [26mm] 13w PLC135/8"GX23-21" 3-1/2" [89mm][89mm][16mm]RSS2 (Specify) K5 I E (Specify) 40w T10 Medium5/8" 3-1/2" 3-1/2"RS2-AHO*** Black [26mm]5/8"1" [89mm] Housing[16mm] [89mm]Only for Pre-Shipment[89mm][16mm]RS2-HHO*** Bronze [26mm] 5/8" Housing Only for Pre-Shipment 5/8" 5/8"5/16"* Lamp Included[16mm][16mm] [16mm][8mm]**Thermal protection device is required for installations 5/16" in drywall, plaster, 5/16" wood or other non-masonry materials and must be ordered as an option, 1-3/8"[8mm] [8mm]11/16"except for fluorescent. Add the suffix 3-1/2" “P” to the catalog number to order.[34mm]11/16"1-3/8"[17mm]***When housing only is ordered for [89mm] pre-shipment, add suffix “LH” (Less Housing) to 11/16" complete catalog number 1-3/8" to order fixture without housing.[17mm] [17mm][34mm] [34mm]11/16"[17mm]3-1/2"[89mm]9"[229mm]9"[229mm]2-11/16"[68mm]11/16"[17mm]3-1/2"[89mm]1/4"[7mm]9"[229mm]5/8"[16mm]1-3/8"[34mm] 3-1/2"2-11/16"[68mm]Ph o t o m e t r i c In f o r m a t io n3-1/2"2-11/16"[68mm]2-11/16"[68mm]11/16"[17mm]3-1/2"[89mm]5/16"[8mm]3-1/2"[89mm]9"[229mm]1-3/8"[34mm]5/8"[16mm]5/8"2-11/16"[68mm]Bottom View (RSB2, RSF2, RSS2)2-11/16"[68mm]3-1/2[89mm156

SteplytesRSC2 Cast BronzeRSC2 AluminumRSV2 AluminumRSV2 Cast BronzeHousing – Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications.Trim Ring – Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Cast bronze fixture has polycarbonate, color-impregnated,dark bronze finish.Finish – Aluminum parts have zinc-rich primer and thermoset powdercoat for durability. Cast bronze has natural finish.Faceplate – Die-cast copper-free aluminum with 45˚ cutoff, with frosted tempered glass. Cast bronze louver is natural cast bronze with frosted tempered glass.Socket – Single contact bayonet (S-8), medium, G23, GX23-2 base (120 volt) or G24Q-1 base (277 volt)Ballast – Fluorescent ballasts are core and coil, NPF Class B, factory wired and tested, rated for 0º C starting temperature. Integral 120/12V transformer is electronic.Wiring – Pre-wired with high temperature #18 wire.ADA Compliant – Compliant when used in indoor and outdoor wall applications.ETL, cETL Listed.Ac c e s s o r i e sCatalog Number DescriptionMAKMMasonry Construction Mounting KitMAKNSNew Stud Wall Construction Mounting KitMAKESExisting Stud Wall Construction Mounting KitNote: All units supplied with mounting hardware for concrete pour installation. If other mounting kits are required, order accessory above.157

3/8"mm]2-11/16"[68mm]11/16"[17mm]"]-3/8"4mm]-11/16"68mm]2-11/16"2-11/16"[68mm][68mm]2-11/16"2-11/16"[68mm][68mm]3-1/2"3-1/2"[89mm]3-1/2"3-1/2"[89mm]5/8"[89mm][89mm]5/8"[16mm]5/8"5/8"[16mm]5/16"1/4" [16mm][16mm]5/16"1/4"[8mm][7mm][8mm][7mm]ISO Fo o t c a n d l e Co n v e r s io n sPh o t o m e t r i c In f o r m 3-1/2" a t io n[89mm]Mounting HeightRSC2 – Symmetric reflector is precision formed,Light Source 2’ 2.5’ 3’ 4’steel with a white reflective coating. The castPL9 (9w) 2.55 1.63 1.13 .63 9"louver 9" offers lower light levels with cut-offPL13 (13w) 3.83 2.45 1.70 .95 [229mm]for[229mm]9" lighting 9" stairways or general lighting where1-3/8"[229mm][229mm] 1-3/8"T10 (40w) 1.87 1.20 .83 11/16" .4611/16"[34mm]shielding of the[34mm]light source is more important1141 (36w) 2.25 1.44 1.00 [17mm]1-3/8".56 1-3/8"11/16"[17mm]1-3/8"[35mm]11/16"than high light levels.[17mm]11/16"1-3/8"[35mm] 4-1/16" [17mm]11/16"[17mm][34mm]4-1/16" 2-11/16"[17mm] RSV2 – Symmetric [34mm]2-11/16" reflector is precision formed,[103mm][103mm] [68mm]semi-specular aluminum [68mm] or highly polished8-1/8"8-1/8"aluminum, which 2-11/16"2-11/16" produces a wide symmetric3-1/2" [207mm][207mm]3-1/2" distribution for [68mm] general[68mm]area lighting.[89mm][89mm]5/8"3-1/2"3-1/2" 5/8"[16mm][89mm][89mm] [16mm]5/16"1/4"5/8"5/8"[8mm][7mm][16mm][16mm]RSC2RSV2 5/16"5/16"Front ViewBottom ViewFront [8mm] View [8mm] Bottom View11/16" 1-3/8"1-3/8"11/16"3-1/2"[17mm] [34mm][34mm]3-1/2"3-1/2"[89mm][17mm][89mm][89mm]9"3-1/2"[229mm]2-11/16"2-11/16"[89mm] 9"[68mm][68mm]9"1-3/8" 9"[229mm][229mm][229mm] 11/16"1-3/8"[35mm][17mm]11/16"3-1/2"1-3/8"4-1/16"9"11/16"1-3/8"[17mm] 3-1/2" [34mm]11/16"1-3/8" 9"[89mm]Side [229mm] View [34mm] 11/16" [103mm][17mm][34mm][89mm][17mm][34mm][229mm]5/8"5/8"[17mm]11/16"1-3/8"8-1/8"1-3/8"2-11/16" [16mm]11/16"[16mm][17mm] [34mm] 2-11/16"[207mm]1/2"[17mm] 2-11/16"[34mm]1/2"[68mm][68mm]2-11/16"[12mm][68mm][12mm][68mm]3-1/2"2-11/16"3-1/2" [68mm] 3-1/2"2-11/16" [89mm]3-1/2"[89mm]1" [89mm][68mm]5/8"1" [89mm][16mm]3-1/2"5/8" [26mm] 5/8"5/8"[26mm]3-1/2"5/16"[89mm][16mm]1/4"[16mm][16mm] [89mm][8mm][7mm] 5/8"5/8"1-3/8"[16mm][16mm]11/16"5/16"3-1/2"1/4"[17mm][34mm][8mm][89mm][7mm]See page 22for LED models. 2-11/16"9"[68mm]Or d e r i n g Gu i d e[229mm]Finish 9"3-1/2"[229mm]11/16"1-3/8"(A) Black[89mm][17mm][34mm](B) White 1-3/8"9" Voltage Insulation5/8"Catalog11/16"(H) Bronze [34mm] Sym Optics [229mm] (E) 120 Detector[16mm][17mm]1/2"Number 1-3/8" (N) Natural Cast Bronze11/16"K5 2-11/16" Lamping (H) 277 (P)** Wattage1-3/8"[35mm][17mm]11/16"[12mm]SocketRSC2 (Specify) K5 [68mm] 8* E4-1/16" 2-11/16"[17mm][34mm] (Specify) (2) 18w 1141 (120/12) Single Contact BayonetRSC2 (Specify)[103mm][68mm]K5 F13 (Specify) n/a 13w PLC13 GX23-2, G24Q-13-1/2"RSC2 (Specify) K58-1/8"1" [89mm]F9 (Specify) n/a 9w PL9 G23RSC2 3-1/2" (Specify) K5 I E 2-11/16" (Specify) 40w T10 Medium[207mm] [26mm] 5/8"RSV2 [89mm] (Specify) K5 [68mm][16mm]8* E (Specify) (2) 18w 1141 (120/12) Single Contact BayonetRSV2 (Specify) 5/8"K5 F13 (Specify) n/a 13w PLC13 GX23-2, G24Q-1RSV2 (Specify)[16mm]K53-1/2"F9 (Specify) n/a 9w PL9 G235/16"[89mm]RSV2 (Specify) K5 I[8mm]5/8"E (Specify) 40w T10 MediumRS2-AHO*** Black Housing Only for Pre-Shipment [16mm]RS2-BHO*** White 11/16" Housing 1-3/8" Only for 5/16" Pre-ShipmentRS2-HHO*** Bronze [17mm] Housing [34mm] Only for [8mm] Pre-ShipmentRS2-NHO*** Natural Cast Bronze Housing Only for Pre-Shipment11/16"1-3/8"[34mm]* Lamp 3-1/2" Included2-11/16"[17mm][89mm][68mm]**Thermal protection device is required for installations in drywall, plaster, wood or other non-masonry materials and must be ordered as an option,except for fluorescent. Add the suffix “P” 3-1/2" to the catalog number to order.2-11/16"***When housing only is ordered 9" for pre-shipment, [89mm] add suffix “LH” (Less Housing) to complete catalog number[68mm]to order fixture without housing.[229mm]11/16"[17mm]1-3/8"[34mm] 1/2"[12mm]5/8"[16mm]3-1/2"[89mm]1/2"5/8"[16mm]158

SteplytesCB100 CompositeHousing – Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications.Finish – Aluminum parts have zinc-rich primer and thermoset powdercoat for durability composite is color impregnated.Faceplate – Injection molded Ryton ® composite.Socket – Medium base or GX23-2 base.Ballast – Fluorescent ballasts are core and coil, NPF Class B, factory wired and tested, rated for 0º C starting temperature.Wiring – Pre-wired with high temperature #18 wire.ADA Compliant – Compliant when used in indoor and outdoor wall applications.ETL, cETL Listed.Ac c e s s o r i e sCatalog Number DescriptionMAKMMasonry Construction Mounting KitMAKNSNew Stud Wall Construction Mounting KitMAKECExisting Stud Wall Construction Mounting KitNote: All units supplied with mounting hardware for concrete pour installation. If other mounting kits are required, order accessory above.159

ISO Fo o t c a n d l e Co n v e r s io n sMounting HeightLight Source 2’ 2.5’ 3’ 4’PL13 (13w) 2.25 1.44 1.00 .56T10 (40w) 1.87 1.20 .83 .46Ph o t o m e t r i c In f o r m a t io nCB100 – Symmetric reflector is precision formed, steelwith a white reflective coating. The cast louver offerslower light levels with cut-off for lighting stairwaysor general lighting where shielding of the light sourceis more important than high light levels.Front ViewSide ViewBottom View3-1/2"[89mm]2-11/16"[68mm]1-3/8"[34mm]11/16"[17mm]9"[229mm]4-11/16"[103mm]11/16"[17mm]5/8"[16mm]1-3/8"[34mm]8-1/8"[207mm]2-5/8"[67mm]Or d e r i n g Gu i d eFinishInsulationCatalog (A) Black Sym Optics Voltage DetectorNumber (H) Bronze K5 Lamping (E) 120 (P)* Wattage socketCB100 (Specify) K5 I E (Specify) 40w T10 MediumCB100 (Specify) K5 F13 E n/a 13w PLC13 GX23-2*Thermal protection device is required for installations in drywall, plaster, wood or other non-masonry materials and must be ordered as an option,except for fluorescent. Add the suffix “P” to the catalog number to order.160

SteplytesRSB3 POLYCARBONATERSC3 AluminumRSC3 Cast BronzeHousing – Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications.Trim Ring – Die-cast aluminum trim contains less than 0.3% copper to resist corrosion. Cast bronze fixture (RSC3) has polycarbonate,color-impregnated, dark bronze finish.Finish – Zinc-rich primer and thermoset powdercoat for durability. Cast bronze has natural finish.Bubble Faceplate – UV stabilized injection molded clear polycarbonate.Horizontal Louver Faceplate – Die-cast copper-free aluminum with 45º cutoff, with frosted tempered glass.Cast bronze louver is natural cast bronze with frosted tempered glass.Socket – All incandescent and HID sockets are medium base. Fluorescent is GX24q-3 , T4 is GY6.35 bi-pin.Ballast – HID ballasts are HPF core and coil, factory wired and tested, mounted to a key-slotted removable tray with quick disconnect for easy installation.120V/ 12V integral transformer is electronic. Fluorescent ballast is electronic (-20º F cold weather start).Wiring – Pre-wired with high temperature #18 wire.ADA Compliant – Compliant when used in indoor and outdoor wall applications.ETL, cETL Listed.RSB3Side View Front View Section View Bottom View6-11/16"[170mm]1-3/16"[31mm]13/16"[21mm]11/16"[17mm]8-3/8"[212mm]3-1/4"[83mm]12-3/8"[314mm]2-1/2"5-3/4"[146mm]13/16"[21mm][64mm] 4-3/32"10-11/16" [104mm][271mm]RSC3Side View Front View Section View Bottom View6-11/16"[170mm] 1-3/16"[31mm]8-3/8"[212mm]5-3/4"[146mm]13/16"[21mm]11/16"[17mm]1-1/8"[28mm]12-3/8"[314mm]2-1/2"[64mm]10-11/16"[271mm]13/16"[21mm]4-3/32"[104mm]161

ISO Fo o t c a n d l e Co n v e r s io n sMounting HeightLight Source 2’ 2.5’ 3’ 4’35w HPS .79 .51 .35 .2050w HPS 1 .41 .90 .63 .3570w HPS 2.25 1.44 1.00 .5650w MH 1.20 .77 .53 .3070w MH 2.1 1.35 .94 .5326w PL .63 .41 .28 .1660w A19 .31 .20 .14 .0850w T4 .35 .23 .16 .09Ph o t o m e t r i c In f o r m a t io nRSB3Distribution: SymmetricLamp/Wattage: 70W HPSMounting Height: 3’RSC3 – Specular aluminum symmetric.RSB3 – Highly polished light diffuse aluminum material.Symmetric reflector is precision formed, light diffusealuminum for bubble and specular aluminum for louverwhich produces a wide distribution for general lightingpurposes. The RSC3 frosted lens offers lower light levelswith cutoff for lighting stairways or general area lightingwhere shielding of the light source is more importantthan high light levels.Asymmetric reflector is made from a combinationsemi-specular and light diffuse aluminum materialand is precision formed, highly polished aluminum,which is field-adjustable for an asymmetric left or rightdistribution for lighting stairways. PL lamping not availablewith asymmetric optics.Or d e r i n g Gu i d eFinish(A) BlackOptics(B) White T5 Sym Voltage InsulationCatalog (H) Bronze T3 Asym (E) 120 DetectorNumber (N) Natural Cast Bronze K5 Sym Lamping (H) 277 (P)** Wattage SocketRSB3 (A,H) (T3,T5) 4* E (Specify) 50w T4 Bi-Pin GY6.35RSB3 (A,H) (T3,T5) S (Specify) (Specify) 50w MH MediumRSB3 (A,H) (T3,T5) T † (Specify) n/a 70w MH MediumRSB3 (A,H) (T3,T5) X (Specify) (Specify) 35w HPS MediumRSB3 (A,H) (T3,T5) V (Specify) (Specify) 50w HPS MediumRSB3 (A,H) (T3,T5) H † (Specify) n/a 70w HPS MediumRSB3 (A,H) (T5) F26 (Specify) n/a 26w CFL GX24q-3RSB3 (A,H) (T5) F32 (Specify) n/a 32w CFL GX24q-3RSB3 (A,H) (T5) F42 (Specify) n/a 42w CFL GX24q-4RSB3 (A,H) (T3,T5) I E (Specify) 60w A19 MediumRSC3 (Specify) K5 4* E (Specify) 50w T4 Bi-Pin GY6.35RSC3 (Specify) K5 S † (Specify) n/a 50w MH MediumRSC3 (Specify) K5 T † (Specify) n/a 70w MH MediumRSC3 (Specify) K5 X (Specify) (Specify) 35w HPS MediumRSC3 (Specify) K5 V (Specify) (Specify) 50w HPS MediumRSC3 (Specify) K5 H † (Specify) n/a 70w HPS MediumRSC3 (Specify) K5 F26 (Specify) n/a 26w CFL GX24q-3RSC3 (Specify) K5 F32 (Specify) n/a 32w CFL GX24q-3RSC3 (Specify) K5 F42 (Specify) n/a 42w CFL GX24q-4RSC3 (Specify) K5 I E (Specify) 60w A19 MediumRS3-AHO*** Black Housing Only for Pre-ShipmentRS3-BHO*** White Housing Only for Pre-ShipmentRS3-HHO*** Bronze Housing Only for Pre-ShipmentRS3-NHO*** Natural Cast Bronze Housing Only for Pre-Shipment*Integral Low Voltage Transformer**Thermal protection device is required for installations in drywall, plaster, wood or other non-masonry materials and must be ordered as an option,except for fluorescent. Add the suffix “P” to the catalog number to order.***When housing only is ordered for pre-shipment, add suffix “LH” (Less Housing) to complete catalog number to order fixture without housing.†Brick, block, or stone installation only.Ac c e s s o r i e sCatalog Number DescriptionMAKMMasonry Construction Mounting KitMAKNSNew Stud Wall Construction Mounting KitMAKESExisting Stud Wall Construction Mounting KitNote: All units supplied with mounting hardware for concrete pour installation. If other mounting kits are required, order accessory above.162

SteplytesEWB4 AluminumHOUSING – Semi-recessed water tight die-cast aluminum with polycarbonate lens. Hinges allow for easy re-lamping.FASTENERS – Captive, black oxide stainless steel, tamper resistant.GASKET – Single piece molded siliconeSOCKET – Medium base socket is porcelain, 4kv pulse rated. Bi-pin socket is porcelain.REFLECTOR – Removable, field-adjustable symmetric/asymmetric specular aluminum reflector assembly.LENS – Injection molded, UV stabilized polycarbonate lens with silicone gasketing.BALLAST MODULE – Electrical components are mounted to a key-slotted removable tray with a quick disconnect for easy installation and replacement.BALLAST – Ballast is factory wired and tested. HPF. Starting temperature -20ºF.WIRING COMPARTMENT – One (1) 1/2” NPT conduit tap on the back, two (2) 3/4” NPT taps on the bottom and one (1) 3/4” NPT tapon each side for easy through-wiring.MOUNTING – Hardware and template for concrete pour is supplied. Mounting kits for masonry (MAKM) and new (MAKNS) or existing stud walls(MAKES) may be ordered as accessories. An insulation protector is required for installations in drywall, plaster, wood or other non-masonry materialsand must be ordered as an option.ADA Compliant – Compliant when used in indoor and outdoor wall applications.ETL, cETL Listed.Ac c e s s o r i e sCatalog Number DescriptionMAKMMasonry Construction Mounting KitMAKNSNew Stud Wall Construction Mounting KitMAKESExisting Stud Wall Construction Mounting KitNote: All units supplied with mounting hardware for concrete pour installation. If other mounting kits are required, order accessory above.163

La m p Multiplier39w 50w 70w 100w 35w 50w 70w 100wMH MH MH MH HPS HPS HPS HPS.37 .44 .64 1.0 .25 .44 .76 1.31Ph o t o m e t r i c In f o r m a t io n00881616242416 8 0 8 1616 8 012"8Symmetric Distribution100w, E17 MHAsymmetric Distribution [305mm]100w, E17 MHMounting Height: 3’Mounting Height: 3’(shown with right position socket)Front View Side View12"[305mm]Bottom View3-15/16"[100mm]5-[1312"12"[305mm][305mm]1-7/16"1-7/16"[37mm][37mm]12"12"[305mm][305mm]5-21/32"5-21/32"3-15/16"3-15/16"[144mm][144mm][100mm][100mm]7/8"7/8"5-13/32"5-13/32" [22mm][22mm][137mm][137mm]6"[152mm]1-7/16"[37mm]27/32"[21mm]6"[152mm]1-29/32"[48mm]11-11/32"[288mm]6-3/4"12" 6-3/4"[171mm] [305mm] [171mm]Section View12" Back View1-29/32"1-29/32"[305mm]27/32"27/32"[48mm][48mm]5-21/32"[21mm][21mm]3-15/16"[144mm]11-11/32"11-11/32"[100mm] 3-15/16"[288mm][288mm]12"[100mm] 7/8"Or d e r i n g Gu i d e[305mm] 12"6"6"5-13/32"[22mm][305mm][152mm][152mm] Finish[137mm](A) Black voltage Insulation(B) White 120, 208 Protection(H) Bronze 6-3/4"6-3/4"1-7/16"1-7/16"220 50 hz**, (Optional)[171mm][171mm] [37mm][37mm]Catalog No. (X) Silver 240, 277, 347 Add “P”* 12"Watt/Lamp socket[305mm]EWB4039MH (Specify) 120, 277 (Specify) 39w, T6 MH Bi-pinEWB4050MH (Specify) 120, 277, 347 (Specify) 50w, E17 MH Medium1-29/32"EWB4070MH (Specify) (Specify) 27/32" (Specify) 70w, E17 MH 27/32" Medium 1-29/32"[48mm]EWB4070TMH (Specify) 120, 277, 347 [21mm][48mm](Specify) 70w, T6 MH [21mm] Bi-pinEWB4100MH (Specify) (Specify) 11-11/32"100w, E17 MH MediumEWB4035HPS (Specify) 120 (Specify)[288mm]35w, E17 HPS MediumEWB4050HPS (Specify) (Specify) (Specify) 6"50w, E17 HPS MediumEWB4070HPS (Specify) (Specify) (Specify) [152mm]70w, E17 HPS MediumEWB4100HPS (Specify) (Specify) (Specify) 100w, E17 HPS Medium*Insulation protector is required for installations in drywall, plaster, wood or other non-masonry materials 6-3/4" and must be orderedas an option – add the suffix “P” to the catalog number. Available in 120/277v only. [171mm]**Available in 50, 70, 100 HPS and 70, 100 MH only.5-21/32"[144mm]7/8"[22mm5-13/3[137m11-11/3[288mm164

SteplytesEWR4 AluminumHOUSING – Semi-recessed water tight die-cast aluminum with glass lens. Hinges allow for easy re-lamping.FASTENERS – Captive, black oxide stainless steel, tamper resistant.SOCKET – HID models, porcelain socket is medium base, 4kv pulse rated, or porcelain bi-pin.Fluorescent model, 32 watt socket is GX24q-3; 42 watt socket is GX24q-4.GASKET – Single-piece molded silicone.REFLECTOR – Specular aluminum segmented reflector assembly.LENS – Frosted tempered glass lens with silicone gasketing.BALLAST MODULE – Electrical components are mounted to a key-slotted removable tray with a quick disconnectfor easy installation and replacement.BALLAST – Ballast is factory wired and tested. HPF. Starting temperature -20˚F.WIRING COMPARTMENT – One (1) 1/2” NPT conduit tap on the back, two (2) 3/4” NPT taps on the bottomand one (1) 3/4” NPT tap on each side for easy through-wiring.MOUNTING – Hardware and template for concrete pour is supplied. Mounting kits for masonry (MAKM) and new (MAKNS)or existing stud walls (MAKES) may be ordered as accessories. An insulation protector is required for installations in drywall, plaster,wood or other non-masonry materials and must be ordered as an option.ADA Compliant – Compliant when used in indoor and outdoor wall applications.ETL, cETL Listed.Ac c e s s o r i e sCatalog Number DescriptionMAKMMasonry Construction Mounting KitMAKNSNew Stud Wall Construction Mounting KitMAKESExisting Stud Wall Construction Mounting KitNote: All units supplied with mounting hardware for concrete pour installation. If other mounting kits are required, order accessory above.165

Ph o t o m e t r i c In f o r m a t io nLa m p Multiplier032w 42w 39w 50w 70w 100w 35w 50w 70w 100wPLT PLT MH MH MH MH HPS HPS HPS HPS.27 .35 .37 .44 .64 1.0 .25 .44 .76 1.3181616 8 0 8Symmetric Distribution100w, E17 MHMounting Height: 3’Front ViewBottom ViewSide View1-7/16"[37mm]12"[305mm]12"[305mm]27/32"[21mm]1-29/32"[48mm]11-11/32"[288mm]12"[305mm]19/32"[15mm]5-21/32"[144mm]7/8"[22mm]Section ViewBack View6"[152mm]5-13/32"[137mm]12"[305mm]6-3/4"[171mm]Or d e r i n g Gu i d eFinish(A) Black voltage Insulation(B) White 120, 208 Protection(H) Bronze 220 50 hz**, (Optional)Catalog No. (X) Silver 240, 277, 347 Add “P”* Watt/Lamp socketEWR4039MH (Specify) 120, 277 (Specify) 39w, T6 MH Bi pinEWR4050MH (Specify) 120, 277, 347 (Specify) 50w, E17 MH MediumEWR4070MH (Specify) (Specify) (Specify) 70w, E17 MH MediumEWR4070TMH (Specify) 120, 277, 347 (Specify) 70w, T6 MH Bi pinEWR4100MH (Specify) (Specify) (Specify) 100w, E17 MH MediumEWR4035HPS (Specify) 120 (Specify) 35w, E17 HPS MediumEWR4050HPS (Specify) (Specify) (Specify) 50w, E17 HPS MediumEWR4070HPS (Specify) (Specify) (Specify) 70w, E17 HPS MediumEWR4100HPS (Specify) (Specify) (Specify) 100w, E17 HPS MediumEWR4026F (Specify) 120, 208, 240, 277 n/A 26w, PLT-26 GX24q-3EWR4032F (Specify) 120, 208, 240, 277 n/A 32w, PLT-32 GX24q-3EWR4042F (Specify) 120, 208, 240, 277 n/A 42w, PLT-42 GX24q-4*Insulation protector is required for installations in drywall, plaster, wood or other non-masonry materials with the exceptionof fluorescent lamping and must be ordered as an option – add the suffix “P” to the catalog number. Available in 120/277v only.**Available in 50, 70, 100 HPS and 70, 100 MH only.166

SteplytesRRB1 Polycarbonate RRC1 Aluminum RRF1 PolycarbonateHOUSING – Aluminum die-casting containing less than 0.3% copper to prevent corrosion in con crete applications.SOCKET – Sockets are pre-wired with high temperature #18 wire.FASTENERS – Captive, black oxide stainless steel.GASKET – Single-piece molded silicone to prevent water, dust, and insect infiltration.LENS – RRB1: UV stabilized injection molded clear polycarbonate bubble lens, allowing positioning of lamp to project out of the wall enablingan efficient wide distribu tion. RRC1: Tempered glass spread lens for uniform light distribution. RRF1: UV stabilized injection molded opal polycarbonateallowing 80% light transmission for general lighting applications or where a mark er is required.REFLECTOR – Reflector is formed from highly reflective aluminum.WIRING COMPARTMENT – Internal wiring compartment contains two (2) 1/2” NPT conduit taps in the bottom and one (1) 1/2” NPT conduit tapin both sides. A removable plug will be provided for one (1) tap.Cast Louver – Die-cast aluminum, offering 45º shielding.ADA Compliant – Compliant when used in indoor and outdoor wall applications.ETL, cETL Listed.Ac c e s s o r i e sCatalog Number DescriptionMAKMMasonry Construction Mounting KitMAKNSNew Stud Wall Construction Mounting KitMAKESExisting Stud Wall Construction Mounting KitNote: All units supplied with mounting hardware for concrete pour installation. If other mounting kits are required, order accessory above.167

Ph o t o m e t r i c In f o r m a t io nRRB1 – Bubble lens offers efficient wide distribution.Distribution: SymmetricLamp/Wattage: 15w T7Mounting Height: 2’RRC1 – Cast louver and frosted lens offer lowerlight levels with cutoff for lighting stairways orgeneral area lighting where shielding of the lightsource is more important than high light levels.Distribution: SymmetricLamp/Wattage: 15w T7Mounting Height: 2’RRF1 – Opal lens is used as a marker or forgeneral lighting.Distribution: SymmetricLamp/Wattage: #93Mounting Height: 2’RRB1Front View Side View Front View Side View Front View Side View4"2"4"4"[102mm] [51mm][102mm][102mm]1-1/16"[27mm]3-9/16"[90mm]RRC11-1/16"[27mm]7/8"[23mm]RRF11-1/16"[27mm]13/16"[20mm]3-3/16"[81mm]2-5/8"[67mm]11/16"[18mm]Or d e r i n g Gu i d eFinish(A) Black InsulationCatalog (B) White Detector Max.Number (H) Bronze (P)* Face Plate Voltage Wattage Lamping SocketRRB1I (A, H) (Specify) Bubble 120 15w T7 Double Contact BayRRC1I (Specify) (Specify) Cast Louver 120 15w T7 Double Contact BayRRF1I (A, H) (Specify) Opal Lens 120 15w T7 Double Contact Bay*Insulation protector is required for installations in drywall, plaster, wood or other non-masonry materials with the exception of fluorescent lampingand must be ordered as an option – add the suffix “P” to the catalog number.168

SteplytesRRB3 PolycarbonateRRC3 AluminumHousing – Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications.Trim Ring – Die-cast aluminum trim contains less than 0.3% copper to resist corrosion.Finish – Aluminum parts have zinc-rich primer and thermoset powdercoat for durability.Bubble Faceplate – UV stabilized injection molded clear polycarbonate.Horizontal Louver Faceplate – Die-cast copper-free aluminum with 45º cut off, with frosted tempered glass.Socket – All incandescent and HID sockets are medium base. Fluorescent is GX24q-3 and GX24q-4. T4 is GY6.35 bi-pin.Ballast – HID ballasts are HPF core and coil, factory wired and tested, mounted to a key-slotted removable tray with quick disconnectfor easy installation. 120V/12V integral transformer is electronic. Fluorescent ballast is electronic (-20ºF cold weather start).Wiring – Pre-wired with high temperature #18 wire.ADA Compliant – Compliant when used in indoor and outdoor wall applications.ETL, cETL Listed.RRB3Section ViewFront ViewSide ViewRRC3Section ViewFront ViewSide View7-7/8"[200mm]7-7/8"[200mm]Bottom View2-1/4"[57mm]9-21/32"[246mm]3-3/4"[95mm]29/32"[23mm]2-7/8"[73mm]5-13/16"[148mm]1-7/16"[37mm]29/32"[23mm]Bottom View2-1/4"[57mm]9-21/32"[246mm] 1-1/8"[28mm] 5-13/16"[148mm]29/32"[23mm]2-7/8"[73mm]1-7/16"[37mm]29/32"[23mm]169

steplyte installationtwo (2) l-Bracketscross Brackets9" Round steplyte showncross Bracket slot(nails supppliedby customer)Fine AdjustmentslotWall BoardthicknessFour (4)FinishingRing & screwlocationsstudWirecompartmentcoverthermal Protector(Mounted fromInside Housing)Installation for new stud wall(Use Accessory Kit #MAKNS)1. Using the supplied template, cut a level hole throughthe existing wall between studs. (Failure to level holewill cause fixture to have tilted appearance.)2. Mount L-brackets onto top and bottom of housingwith screws positioned in center of slots.3. Insert cross brackets through L-brackets.4. Position fixture so the back of the finishing ringextends past the studs the thickness of thewallboard.5. Level fixture and hammer tabs on cross bracketsinto studs. Nail brackets securely to studs.6. Fine adjust fixture position and tighten any loosescrews.7. Remove the 1/2” NPT plugs from the sides/bottomof the housing and pull the supply wire throughinto the housing.8. Remove finishing ring by removing flathead screws.9. Install wallboard.10. Replace finishing ring.11. Install thermal protector (attached to electrical chassis).Flag Fastenertemplate HoleMountingscrews &screw HolesWRecompartmentcover thermal Protector(Mounted fromInside Housing)9" Round steplyte shownInstallation for existing stud wall(Use Accessory Kit #MAKES)1. Using the supplied template, cut a level hole throughthe existing wall between studs. (Failure to levelhole will cause fixture to have tilted appearance.)2. Push the mounting screws through the housingholes and into rear channels. (Note: a thinmembrane covers the housing holes and mayrequire forcing the screws through by tappingthem lightly with a hammer.)3. Place flags flat on rear of housing. Thread screwsinto and through the flags.4. Remove the 1/2” NPT plugs from the sides/bottomof the housing and pull the supply wire through intothe housing. (Through wiring not recommended.)5. Remove wiring compartment screw and wiringcompartment from housing.6. Push housing into the hole in the wall.7. Tighten the mounting screws until the flag fastenersare drawn tight against the inner surface of the wall.8. Replace wiring compartment in its original positionand replace screw.9. Install thermal protector (attached to electrical chassis).Finishing Ringand screwlocationsMounting screw Holelocations (two (2) places)Finishing Ring Mount9" Round steplyte showntemplatetwo (2) Washers& 8-32 X 2"long screwsoRFlush MountInstallation for Concrete Pour(Hardware included with each fixture)1. Level supplied template on wood support frame and drill 3/16” diameter clearanceholes as marked.2. Remove the 1/2” NPT plugs from the sides/bottom of the housing.3. Install plastic protective shield (if supplied) into housing.4. Pull the supply wire through into the housing. (Through wiring not recommended.)Be sure all unused electrical plugs are replaced. Finishing ring may be removednow and replaced after concrete pour.5. Secure housing to wood support with screws supplied in hardware packet.6. Pour concrete.7. If finishing ring was removed, replace it and tighten flathead screws.If screws are not tight, fixture may leak.screw,Washer,BracketMortarBracketHolesFinishing Ringextends PastBlockInstallation for masonry(Use Accessory Kit #MAKM)1. Install screw through washer and lower masonrybrackets and into tapped housing hole on bottomof fixture.2. Remove the 1/2” NPT plugs from the sides/bottomof the housing and pull the supply wire throughinto the housing.3. Press fixture and lower masonry bracketsinto layer of mortar so that mortar comesthrough the holes of the brackets.4. After laying another course of blocks, installthe two upper masonry brackets ontothe housing as in Step 1.9" Round steplyte shown171

Line Voltage1/2-14 nPt PlugFlag Fastenertemplate HoleInstallation for newor existing stud wall(Use Accessory Kit #MAKES)12" squaresteplyte shownMounting screwlocationsthermalProtector3/4-14 nPt plugone (1) on each sidetwo (2) on the bottom1. Using the supplied template, cut a level holethrough the existing wall between studs.(Failure to level hole will cause fixtureto have tilted appearance.)2. Push the four (4) mounting screws throughthe housing holes and into rear channels.(Note: a thin membrane covers the housingholes and may require forcing the screwsthrough by tapping them lightly with a hammer.)3. Place flags flat on rear of housing. Thread screwsinto and through the flags.4. Remove the desired 1/2” NPT plugsfrom the side(s)/back/bottom of the housingand pull the supply wire through into the housing.5. Be sure to use proper connections per NECand local codes.6. Push housing into the hole in the wall.7. Tighten the mounting screws until the flagfasteners are drawn tight against the inner surfaceof the wall.8. Install thermal protector.Installation for Concrete Pour(Hardware included with each fixture)1. Level supplied template on wood support frame and drill four (4) 3/16” diameter clearance holes as marked.(Failure to level template will cause the fixture to have a tilted appearance.)2. Remove the desired 1/2” NPT plug(s) from the side(s)/back/bottom of the housing and pullthe supply wire through into the housing.3. Be sure to use proper connections per NEC and local codes.4. Install the protective cover (if supplied) on the housing and make sure all unused electrical plugs are replaced.5. Secure housing to wood support with screws supplied in hardware packet.6. Pour concrete.12" Square Steplyte ShownInstallation for masonryScrewWasherBracket1/2-14 NPT PlugNote: 1/2" EdgeExtends Past WallMorter Holes(Use Accessory Kit #MAKM)1. Install two (2) screws through washersand lower masonry brackets and into tappedholes on bottom of the housing.2. Remove desired NPT plug(s) from the side(s)/back/bottom of the housing and pullthe supply wire through into the housing.3. Be sure to use proper connections per NECand local codes.4. Press housing with lower masonry bracketsinto the mortar so that mortar comes throughthe holes of the brackets.5. Continue laying block until level with the topof the fixture. Install the two upper masonrybrackets into the housing as in Step 1.6. Finish laying mortar and block over topof the fixture.Lower Masonry BracketsMounting ScrewLocations3/4-14 NPT plugOne (1) on each side,Two (2) on the bottom172

Line VoltageWalkway Lighting

Our line voltage pathlytes, bollards and beacons unlock the optionsfor all types of residential and commercial applications.In this section, you’ll find forms and functions finely suited for all typesof environments: from public courtyard and university campusto secluded backyard promenade.Our variety of finishes and materials ensure that our walkway fixtureswill blend into your environment … or stand out and make a statement.

pathlytesMU5 AluminumMU5-A BlackMU5-H BronzeMU5-G VerdeMU5-U SiennaMU5-T Speckled Stone• 120 Volt• 100 watt maximum• A19 Lamp• 1/2” NPS fitterHousing – Die-cast aluminum with stainless steel hingesand spring latch providing tool-less entry.Finish – Black, bronze, speckled stone or sienna thermosetpowdercoat. Hand-rubbed verde antiqued over black powdercoat.Lens – Frosted, tempered glass sprinkler shield with moldedsilicone gaskets.Socket – Porcelain medium base.Wiring – Incandescent pre-wired with high temperature #18 wire.ETL, cETL Listed.MU5 BrassMU5-N Natural Brass MU5-OB Oiled Brass• 120 Volt• 100 watt maximum• A19 Lamp• 1/2” NPS fitterHousing – Die-cast brass with stainless steel hingesand spring latch, providing tool-less entry.Finish – Natural brass or oiled brass.Lens – Frosted, tempered glass sprinkler shield---with molded silicone gaskets.Socket – Porcelain medium base.Wiring – Incandescent pre-wired with hightemperature #18 wire.ETL, cETL Listed.Recommended Spacing - MU5 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 100W A19 9.62 1.52 .46 .17 .10 .05 .03 - -9"[229mm]Recommended Spacing - MU5 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 100W A19 9.62 1.52 .46 .17 .10 .05 .03 - -9"[229mm]25"[635mm]25"[635mm]175

MU3 AluminumMU3-A BlackMU3-H BronzeMU3-G VerdeMU3-T Speckled StoneMU3-U Sienna• 120 Volt• 150 watt maximum• A21 Lamp• 1/2” NPS fitterHousing – Die-cast aluminum roof and lamp holderwith aluminum stem.Finish – Black, bronze, speckled stone or siennathermoset powdercoat. Hand-rubbed verde antiquedover black thermoset powdercoatSocket – Porcelain medium base.Wiring – Pre-wired with high temperature #18 wire.ETL, cETL Listed.TU3 AluminumTU3-G Verde• 120 Volt• 100 watt maximum• A19 Lamp• 1/2” NPS fitterHousing – One-piece cast aluminumwith aluminum stem.Finish – Hand-rubbed verde antiqued over blackthermoset powdercoat.Socket – Porcelain medium base.Wiring – Incandescent fixtures are pre-wiredwith high temperature #18 wire.ETL, cETL Listed.Recommended Spacing - MU3 - 17’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 150W A21 58 26 14 6.4 3.6 2.0 1.0 .5 .216"[406mm]Recommended Spacing - TU3 - 13’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 100W A19 15.6 9.3 4.6 2.0 1.8 .3 .1 - -10-5/16"[262mm]29"[737mm]36"[915mm]24"[610mm]7-1/4"[183mm]176

pathlytesT39 AluminumT39-G Verde• 120 Volt• 100 watt maximum• A19 Lamp• 1/2” NPS fitter• Stem not included, order separatelyHousing – Die-cast aluminum construction.Finish – Hand-rubbed verde antiquedover black thermoset powdercoat.Socket – Porcelain medium base.Wiring – Incandescent fixtures arepre-wired with high temperature #18 wire.ETL, cETL Listed.Optional StemsCatalog No. Finish DescriptionS12 (Specify)* Stem-12”, 1/2” NPSS24 (Specify)* Stem-24”, 1/2” NPSS36 (Specify)* Stem-36”, 1/2” NPS*Specify Finishes: G-Verde (shown), OM-Old MarbleRecommended Spacing - T39 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 100W A19 19.5 5.4 1.8 .6 .25 .08 - - -8-1/4"[209mm]13-3/4"[349mm]11-3/16"[284mm]TR5 AluminumTR5-G Verde• 120 Volt• 100 watt maximum• A19 Lamp• 1/2” NPS fitterHousing – Die-cast aluminum with stainlesssteel hinges and spring latch provide tool-less entry.Finish – Hand-rubbed verde antiquedover black thermoset powdercoat.Lens – Frosted, tempered glass sprinkler shieldwith molded silicone gaskets.Socket – Porcelain medium base.Wiring – Incandescent fixtures are pre-wiredwith high temperature #18 wire.ETL, cETL Listed.Recommended Spacing - TR5 - 13’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 75W A19 17.4 6.1 3.5 2.0 1.0 .4 .05 - -28-1/8"[715mm]9-7/8"[251mm]A42 AluminumA42-G VerdeOptional StemsCatalog No. Finish DescriptionS12 (Specify)* Stem-12”, 1/2” NPSS24 (Specify)* Stem-24”, 1/2” NPSS36 (Specify)* Stem-36”, 1/2” NPS*Specify Finishes: G-Verde (shown),T-Speckled Stone, U-SiennaRecommended Spacing - A42 - 14’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 60W A19 12.5 5.8 2.4 1.2 .6 .4 .2 .1 -12-7/16"[315mm]12"[305mm]A42-U SiennaA42-T Speckled Stone• 120 Volt• 60 watt maximum• A19 Lamp• 1/2” NPS fitter• Stem not included, order separatelyHousing – Die-cast aluminum construction.Removable roofs for easy relamping.Finish – Hand-rubbed verde antiqued over blackthermoset powdercoat. Speckled stone, or siennathermoset powdercoat.Lens – Opalescent glass panels,removable for cleaning.Socket – Porcelain medium base.Wiring – Incandescent fixtures arepre-wired with high temperature #18 wire.ETL, cETL Listed.7-3/8"[187mm]177

A43 AluminumA43-G VerdeA43-U SiennaA43-T Speckled Stone• 120 Volt• 60 watt maximum• A19 Lamp• 1/2” NPS fitter• Stem not included, order separatelyHousing – Die-cast aluminum construction.Removable roofs for easy relamping.Finish – Hand-rubbed verde antiqued over blackthermoset powdercoat. Speckled stone, or siennathermoset powdercoat.Lens – Opalescent glass panels,removable for cleaning.Socket – Porcelain medium base.Wiring – Incandescent fixtures arepre-wired with high temperature #18 wire.ETL, cETL Listed.R3 AluminumR3-G Verde• 120 Volt• 100 watt maximum• A19 Lamp• 1/2” NPS fitterHousing – Die-cast aluminum construction.Stem included.Finish – Hand-rubbed verde antiquedover black thermoset powdercoat.Lens – Painted, molded glass with clear top.Socket – Medium base.Wiring – Incandescent fixtures arepre-wired with high temperature #18 wire.ETL, cETL Listed.P3 AluminumP3-G Verde• 120 Volt• 75 watt maximum• A19 Lamp• 1/2” NPS fitterHousing – Die-cast aluminum construction.Stem included.Finish – Hand-rubbed verde antiquedover black thermoset powdercoat.Lens – Painted, molded glass with clear top.Socket – Medium base.Wiring – Incandescent fixtures arepre-wired with high temperature #18 wire.ETL, cETL Listed.Optional StemsCatalog No. Finish DescriptionS12 (Specify)* Stem-12”, 1/2” NPSS24 (Specify)* Stem-24”, 1/2” NPSS36 (Specify)* Stem-36”, 1/2” NPS*Specify Finishes: G-Verde (shown),T-Speckled Stone, U-SiennaRecommended Spacing - A43 - 14’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 60W A19 12.5 5.8 2.4 1.2 .6 .4 .2 .1 -7-3/8"[187mm]Recommended Spacing - R3 - 10’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 100W A19 19.5 5.4 1.8 .6 .25 .08 - - -18"[457mm]9-1/8"[232mm]Recommended Spacing - P3 - 9’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 75W A19 15.0 4.0 1.0 .4 .1 .05 - - -18-1/2"[470mm]6"[152mm]11-1/4"[286mm]178

pathlytesP39 AluminumP39-K Garden Green• 120 Volt• 75 watt maximum• A19 Lamp• 1/2” NPS fitter• Stem not included, order separatelyHousing – Die-cast aluminum construction.Removable roof for easy relamping.Finish – Garden green thermoset powdercoat.Lens – Clear molded glass.Socket – Medium base.Wiring – Incandescent fixtures arepre-wired with high temperature #18 wire.ETL, cETL Listed.Q39 AluminumQ39-K Garden Green• 120 Volt• 100 watt maximum• A19 Lamp• 1/2” NPS fitter• Stem not included, order separatelyHousing – Die-cast aluminum construction.Removable roof for easy relamping.Finish – Garden green thermoset powdercoat.Lens – Clear molded glass.Socket – Medium base.Wiring – Pre-wired withhigh temperature #18 wire.ETL, cETL Listed.Optional StemsCatalog No. Finish DescriptionS12-K Garden Green Stem-12”, 1/2” NPSS24-K Garden Green Stem-24”, 1/2” NPSS36-K Garden Green Stem-36”, 1/2” NPSOptional StemsCatalog No. Finish DescriptionS12-K Garden Green Stem-12”, 1/2” NPSS24-K Garden Green Stem-24”, 1/2” NPSS36-K Garden Green Stem-36”, 1/2” NPSRecommended Spacing - P39 - 14’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 75W A19 8.5 4.0 2.2 .9 .5 .3 .2 .1 -6"[152mm]Recommended Spacing - Q39 - 14’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 100W A19 9.2 8.2 2.4 1.0 .6 .4 .2 .1 -6"[152mm]7"[178mm]8-13/16"[224mm]179

R39 AluminumR39-K Garden Green• 120 Volt• 100 watt maximum• A19 Lamp • 1/2” NPS fitter• Stem not included, order separatelyHousing – Die-cast aluminum construction.Removable roof for easy relamping.Finish – Garden green thermoset powdercoat.Lens – Clear molded glass.Socket – Medium base.Wiring – Pre-wired withhigh temperature #18 wire.ETL, cETL Listed.QF59 AluminumQF59-K Garden Green• 120 Volt• 13 watt maximum• PL13 Lamp • 1/2” NPS fitter(fluorescent)• Stem not included, order separatelyHousing – Die-cast aluminum construction.Removable roof for easy relamping.Finish – Garden green thermoset powdercoat.Lens – Clear molded glass.Socket – GX23-2 base.Ballast – Core and coil, NPF Class B,rated for 0ºC operating temperature.Wiring – Pre-wired withhigh temperature #18 wire.ETL, cETL Listed.R30 AluminumR30-A Black• 120 Volt• 100 watt maximum• A19 LampHousing – Die-cast aluminum construction.Extruded aluminum direct burial pole,48” overall length.Finish – Black thermoset powdercoat.Lens – Clear molded glass.Socket – Medium base.Wiring – Pre-wired with high temperature#18 wire.ETL, cETL Listed.Optional StemsCatalog No. Finish DescriptionS12-K Garden Green Stem-12”, 1/2” NPSS24-K Garden Green Stem-24”, 1/2” NPSS36-K Garden Green Stem-36”, 1/2” NPSOptional StemsCatalog No. Finish DescriptionS12-K Garden Green Stem-12”, 1/2” NPSS24-K Garden Green Stem-24”, 1/2” NPSS36-K Garden Green Stem-36”, 1/2” NPSRecommended Spacing - R30 - 14’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 100W A19 9.2 8.2 2.4 1.0 .6 .4 .2 .1 -Recommended Spacing - R39 - 12’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’Recommended Spacing - QF59 - 12’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’8-5/8"[220mm]10-1/8"[257mm]120V, 100W A19 11.0 8.4 2.2 1.0 .6 .3 .1 - -120V, 13W PL13 4.0 4.4 2.0 .8 .4 .2 .1 - -10-1/8"[257mm]8-5/8"[220mm]6"[152mm]11-5/16"[287mm]37"[940mm]18"[457mm]180

ollardsCL81 Aluminum CL82 Aluminum CL83 AluminumUpper Housing – Die-cast aluminum. Head assembly is mounted directly to lower housing with stainless steel screws.Available in three styles: cone, dome, or hexagonal style.Lower Housing – Constructed of 8” diameter extruded aluminum (1/8” walls).Optics – Die-cast aluminum louvers with tempered ribbed glass. 180° house side shield is supplied with each fixture (optional use).Gasket – Molded silicone gasket seals glass and prevents moisture intrusion into the fixture.Finish – Highly weather-resistant CraftStone finish bonded to the aluminum substrate, or durable thermoset polyester powdercoat appliedafter a five-stage conversion cleaning process. Note: louvers on CraftStone finishes are powdercoated white. Additional finishes, consult factory.Socket – Incandescent and HID: medium base. Fluorescent: GX24q-4 base.Electrical – Standard quad-volt core and coil mounted on removable ballast bracket, with quick connect harness, high power factor,dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts.Mounting – Internal cast aluminum plate is secured to anchor foundation by four (4) 3/8”-16 galvanized steel bolts and nuts.Before installing anchor bolts, contact factory for latest mounting template. A twist-lock action mates mounting casting with lower bollard casting,which is welded to the bottom of the bollard extrusion. One (1) set screw is used to lock the casting in place.Voltage Caution – Some local interpretation of the NEC Section 210-6 only permit the use of 120 volt fixtureswhen they are mounted below 8’. Check with local authorities before specifying alternate voltages.ETL, cETL Listed.8"[203mm]8"[203mm]CL81 CL82 CL838"[203mm]41-1/2"[1055mm]41-9/16"[1056mm]41-1/2"[1055mm]904-3/4"[121mm]9/16"[14mm]90 4-3/4"[121mm]9/16"[14mm]90 4-3/4"[121mm]9/16"[14mm]181

Ph o t o m e t r i c In f o r m a t io nIs o f o o t c a n d l e sWATTAGELAMPLUMENS4’6’8’10’12’14’16’Bronze Louvers OpticsWhite Louver Optics100 28 42 70 100 70 100 100 28 42 70 100 70 100Incan. Fluor. Fluor. MH MH HPS HPS Incan. Fluor. Fluor. MH MH HPS HPS1750 1600 3200 5500 9000 6400 9500 1750 1600 3200 5500 9000 6400 95000.9 0.8 1.6 2.7 4.4 3.1 4.6 0.9 0.9 1.7 2.9 4.8 3.4 5.10.8 0.7 1.5 2.6 4.2 3.0 4.4 0.9 0.8 1.6 2.8 4.5 3.2 4.80.8 0.7 1.4 2.4 4.0 2.8 4.2 0.8 0.7 1.5 2.6 4.2 3.0 4.40.4 0.4 0.8 1.3 2.2 1.6 2.3 0.8 0.7 1.4 2.4 4.0 2.8 4.20.2 0.1 0.3 0.5 0.8 0.6 0.8 0.4 0.4 0.8 1.4 2.3 1.6 2.40.1 0.1 0.1 0.2 0.3 0.2 0.3 0.3 0.2 0.5 0.9 1.4 1.0 1.50.0 0.2 0.1 0.1 0.2 0.1 0.2 0.1 0.1 0.2 0.4 0.7 0.5 0.7Mo u n t i n g Gu i d eUse this arrowto orient fixtureCurb, House, PathMountingBaseGroundingLine1" [26mm]2-1/2" [64mm]Projection3/8" [19mm]Anchor Bolts(4 places)3-1/4" Max.[83mm]Conduit Area4-3/4" [121mm]Bolt CircleOr d e r i n g Gu i d eFinishvoltage(A) Black (E) 120Tops (B) White (F) 208( 1 ) Cone (H) Bronze (G) 240Catalog (2) Dome (L) Limestone Lens and Distribution (H) 277Number (3) Hex (S) Sandstone (AO) Clear, Symmetric Wattage (K) 347 Description Lamp/SocketCL8 (Specify) (Specify) AO 100I (E Only) 100w INC A19/MediumCL8 (Specify) (Specify) AO 42F* (E,F,G,H) 42w CFL GX24q-4CL8 (Specify) (Specify) AO 70S (Specify) 70w HPS E17/MediumCL8 (Specify) (Specify) AO 100S (Specify) 100w HPS E17/MediumCL8 (Specify) (Specify) AO 50H (Specify) 50w MH E17/MediumCL8 (Specify) (Specify) AO 70H (Specify) 70w MH E17/MediumCL8 (Specify) (Specify) AO 100H (Specify) 100w MH E17/Medium*Accepts 26,32 and 42w PLT lamps.182

ollardsDB14 Aluminum DB21 Aluminum DB30 AluminumUpper Housing/Louvers – Die-cast aluminum. Head assembly is mounted to lower housing with three (3) stainless steel screws.Lower Housing – Constructed of 5” extruded aluminum (1/8” wall).Lens – Clear molded glass, threaded against silicone gasket for tight seal.Gasket – Flat silicone gasket.Finish – Highly weather resistant CraftStone finish bonded to the aluminum substrate or durable powdercoat finishelectrostatically applied and bonded by heat fusion thermosetting. Consult factory for additional finishes.Socket – Incandescent and HID: medium base. Fluorescent: GX24q-3 or GX24q-4 base.Reflector – Highly reflective white paint on spun aluminum rings, mounted on the underside of louvers.Electrical – Standard quad-volt core and coil mounted on removable ballast bracket, with quick connect harness,high power factor, dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts.Mounting – Lower casting is secured to anchor foundation by three (3) galvanized steel bolts and nuts.Before installing anchor bolts, contact factory for latest mounting template.Voltage Caution – Some local interpretation of the NEC Section 210-6 only permits the use of 120 volt fixtureswhen they are mounted below 8’. Check with local authorities before specifying alternate voltages.ETL, cETL Listed.DB14 DB21 DB305-15/16"[151mm]5-15/16"[151mm]5-15/16"[151mm]32-1/16"[815mm]3"[ 76mm]1/2"[13mm]14"[356mm]3"[ 76mm]1/2"[13mm]21-11/16"[551mm]3"[ 76mm]1/2"[13mm]120ϒ120ϒ120ϒ183

Ph o t o m e t r i c In f o r m a t io nIs o f o o t c a n d l e sWATTAGELAMPLUMENS2’4’6’8’10’Cast Louvers100 50 70 100 50 70 100Incan. MH MH MH HPS HPS HPS1750 3400 5500 9000 4000 6400 95007.7 15.0 24.3 39.7 17.6 28.2 41.92.9 5.7 9.2 15.1 6.7 10.7 15.90.7 1.3 2.1 3.4 1.5 2.4 3.60.2 0.4 0.6 1.1 0.5 0.8 1.10.1 0.2 0.3 0.5 0.2 0.4 0.6Mo u n t i n g Te m p l a t eMountingBaseGroundingLine1-11/16" [43mm]Projection3/8" [19mm] DiameterAnchor BoltMaximumConduit Area3" [76mm]Bolt CirclePr o d u c t Selection Gu i d e (In c a n d e s c e n t)CatalogNumber Description Finish Max Wattage Lamp SocketDB14-H 14” Mini Bollard, Incandescent Bronze 100w A19 Medium BaseDB21-H 21” Mini Bollard, Incandescent Bronze 100w A19 Medium BaseDB30-H 30” Bollard, Incandescent Bronze 100w A19 Medium BaseOr d e r i n g Gu i d eV voltageFinish (E) 120(A) Black (F) 208(H) Bronze (G) 240Catalog (L) Limestone Lens and Distribution (H) 277Number (S) Sandstone (AO) Clear, Symmetric Wattage (K) 347 Description Lamp/SocketDB14 (Specify) AO 100I (E Only) 100w INC A19/MediumDB21 (Specify) AO 100I (E Only) 100w INC A19/MediumDB21 (Specify) AO 42F* (E,F,G,H) 42w CFL GX24q-4DB21 (Specify) AO 50H (Specify) 50w MH E17/MediumDB21 (Specify) AO 70H (Specify) 70w MH E17/MediumDB21 (Specify) AO 100H (Specify) 100w MH E17/MediumDB21 (Specify) AO 50S (Specify) 50w HPS E17/MediumDB21 (Specify) AO 70S (Specify) 70w HPS E17/MediumDB21 (Specify) AO 100S (Specify) 100w HPS E17/MediumDB30 (Specify) AO 100I (E Only) 100w INC A19/MediumDB30 (Specify) AO 42F (E,F,G,H) 42w CFL GX24q-4DB30 (Specify) AO 50H (Specify) 50w MH E17/MediumDB30 (Specify) AO 70H (Specify) 70w MH E17/MediumDB30 (Specify) AO 100H (Specify) 100w MH E17/MediumDB30 (Specify) AO 50S (Specify) 50w HPS E17/MediumDB30 (Specify) AO 70S (Specify) 70w HPS E17/MediumDB30 (Specify) AO 100S (Specify) 100w HPS E17/Medium*Accepts 26,32 and 42w PLT lamps.184

BOLLARDSRB30 AluminumUpper Housing/Louvers – Die-cast aluminum. Head assembly is mounted to lower housing with three (3) stainless steel screws.Lower Housing – Constructed of 5” extruded aluminum (1/8” wall).Lens – Clear molded glass, threaded against silicone gasket for tight seal.Gasket – Flat silicone gasket.Finish – Highly weather resistant CraftStone finish bonded to the aluminum substrate or durable powdercoat finishelectrostatically applied and bonded by heat fusion thermosetting. Consult factory for additional finishes.Socket – Incandescent and HID: medium base. Fluorescent: GX24q-3 or GX24q-4 base.Reflector – Highly reflective white paint on spun aluminum rings, mounted on the underside of louvers.Electrical – Standard quad-volt core and coil mounted on removable ballast bracket, with quick connect harness,high power factor, dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts.Mounting – Lower casting is secured to anchor foundation by three (3) galvanized steel bolts and nuts.Before installing anchor bolts, contact factory for latest mounting template.Voltage Caution – Some local interpretation of the NEC Section 210-6 only permit the use of 120 volt fixtureswhen they are mounted below 8’. Check with local authorities before specifying alternate voltages.ETL, cETL Listed.10-1/8"[257mm]3"[ 76mm]1/2"[13mm]32-1/4"[818mm]120ϒ185

Ph o t o m e t r i c In f o r m a t io nIs o f o o t c a n d l e sWATTAGELAMPLUMENS2’4’6’8’10’Cast Louvers100 50 70 100 50 70 100Incan. MH MH MH HPS HPS HPS1750 3400 5500 9000 4000 6400 95007.7 15.0 24.3 39.7 17.6 28.2 41.92.9 5.7 9.2 15.1 6.7 10.7 15.90.7 1.3 2.1 3.4 1.5 2.4 3.60.2 0.4 0.6 1.1 0.5 0.8 1.10.1 0.2 0.3 0.5 0.2 0.4 0.6Mo u n t i n g Te m p l a t eMountingBaseGroundingLine1-11/16" [43mm]Projection3/8" [19mm] DiameterAnchor BoltMaximumConduit Area3" [76mm]Bolt CircleOr d e r i n g Gu i d eV voltageFinish (E) 120(A) Black (F) 208(H) Bronze (G) 240Catalog (L) Limestone Lens and Distribution (H) 277Number (S) Sandstone (AO) Clear, Symmetric Wattage (K) 347 Description Lamp/SocketRB30 (Specify) AO 100I (E Only) 100w INC A19/MediumRB30 (Specify) AO 42F* (E,F,G,H) 42w CFL GX24q-4RB30 (Specify) AO 50H (Specify) 50w MH E17/MediumRB30 (Specify) AO 70H (Specify) 70w MH E17/MediumRB30 (Specify) AO 100H (Specify) 100w MH E17/MediumRB30 (Specify) AO 50S (Specify) 50w HPS E17/MediumRB30 (Specify) AO 70S (Specify) 70w HPS E17/MediumRB30 (Specify) AO 100S (Specify) 100w HPS E17/Medium*Accepts 26,32 and 42w PLT lamps.186

BOLLARDSRR70 AluminumRB71 AluminumRL72 AluminumUpper Housing – Die-cast aluminum. Head assembly is mounted to lower housing with four (4) stainless steel screwswhich allow easy access for re-lamping.Lower Housing – Constructed of 6” extruded aluminum (1/8” wall).Optics – Cylindrical fresnel lens projects even illumination in a 360º pattern (RR70). An integral hood directs low level illuminationoutward in a 180º arc (RB71). Integral louvers shield the light source, directing light down and outward in a 360º pattern (RL72).Gasket – Molded silicone gasket seals glass and prevents moisture intrusion into the lamp area.Finish – Durable powdercoat finish electrostatically applied and bonded by heat infusion thermosetting. Consult factory for additional finishes.Socket – Incandescent and HID: medium base. Fluorescent: GX24q-3 or GX24q-4 base.Electrical – Standard quad-volt core and coil mounted on removable ballast bracket, with quick connect harness,high power factor, dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts.Mounting – Lower housing is secured to anchor foundation by three (3) 3/8”-16 galvanized steel bolts and stainless steel nuts.A twist-lock action mates lower casting with upper casting. One (1) set screw is used to lock casting in place. Consult factory for latest mounting template.Voltage Caution – Some local interpretation of the NEC Section 210-6 only permit the use of 120 volt fixtureswhen they are mounted below 8’. Check with local authorities before specifying alternate voltages.ETL, cETL Listed.RR70 RB71 RL726-5/8"[168mm]6-5/8"[168mm]6-5/8"[168mm]35"[887mm]36"[915mm]36"[915mm]120ºTYP.3"[76mm]120ºTYP.3"[76mm]120ºTYP.3"[76mm]9/16"[14mm]9/16"[14mm]9/16"[14mm]187

Ph o t o m e t r i c In f o r m a t io nWATTAGELAMPLUMENSABCDEFGCast Louvers100 42 50 70 100Incan. Fluor. HPS MH MH1220 3200 3300 5000 85002.00 5.25 5.41 8.20 13.931.00 2.62 2.70 4.10 6.970.75 1.97 2.03 3.07 5.230.50 1.31 1.35 20.5 3.480.33 0.87 0.89 1.35 2.300.25 0.66 0.68 1.02 1.740.10 0.26 0.27 0.41 0.70Mo u n t i n g Te m p l a t eMountingBaseGroundingLine1" [26mm]2-1/2" [64mm]ProjectionUse this arrowto align fixture3/8" [19mm] Dia.Anchor Rods(3 places)MaximumConduit AreaSet screw on this sideCurb, House, Path3" [76mm]Bolt CircleOr d e r i n g Gu i d eFinishvoltage(A) Black (E) 120(B) White (F) 208(G) Verde (G) 240Catalog (H) Bronze Lens and Distribution (H) 277Number ( J ) Green (AO) Clear, Symmetric Wattage (K) 347 Description Lamp/SocketRR70 (Specify) AO 100I (E Only) 100w INC A19/MediumRR70 (Specify) AO 42F* (E,F,G,H) 42w CFL GX24q-4RR70 (Specify) AO 50H (Specify) 50w MH E17/MediumRR70 (Specify) AO 70H (Specify) 70w MH E17/MediumRR70 (Specify) AO 100H (Specify) 100w MH E17/MediumRR70 (Specify) AO 50S (Specify) 50w HPS E17/MediumRR70 (Specify) AO 70S (Specify) 70w HPS E17/MediumRR70 (Specify) AO 100S (Specify) 100w HPS E17/MediumRB71 (Specify) AO 100I (E Only) 100w INC A19/MediumRB71 (Specify) AO 42F* (E,F,G,H) 42w CFL GX24q-4RB71 (Specify) AO 50H (Specify) 50w MH E17/MediumRB71 (Specify) AO 70H (Specify) 70w MH E17/MediumRB71 (Specify) AO 100H (Specify) 100w MH E17/MediumRB71 (Specify) AO 50S (Specify) 50w HPS E17/MediumRB71 (Specify) AO 70S (Specify) 70w HPS E17/MediumRB71 (Specify) AO 100S (Specify) 100w HPS E17/MediumRL72 (Specify) AO 100I (E Only) 100w INC A19/MediumRL72 (Specify) AO 42F* (E,F,G,H) 42w CFL GX24q-4RL72 (Specify) AO 50H (Specify) 50w MH E17/MediumRL72 (Specify) AO 70H (Specify) 70w MH E17/MediumRL72 (Specify) AO 100H (Specify) 100w MH E17/MediumRL72 (Specify) AO 50S (Specify) 50w HPS E17/MediumRL72 (Specify) AO 70S (Specify) 70w HPS E17/MediumRL72 (Specify) AO 100S (Specify) 100w HPS E17/Medium*Accepts 26,32 and 42w PLT lamps.188

BeaconsDW1 Cast BronzeDW1-N Natural Cast Bronze• 120 Volt• 20 watt maximum• T3 Halogen lamp (included)• With integral transformerHousing – Constructed of cast bronze.Recessed housing is compression molded composite.Two (2) 1/2” conduit inlets on bottom.Finish – Natural bronze.Lens – Borosilicate frosted glass lens;fully-gasketed top and bottom.Socket – Bi-pin type (G4).Transformer – Standard 120/12 voltelectronic transformer is furnished.Wiring – Incandescent fixtures are pre-wiredwith high temperature #18 wire.ETL, cETL Listed.DWC1 CompositeDWC1-A Black• 120 Volt• 20 watt maximum• T3 Halogen lamp (included)• With integral transformerHousing – Injection molded polyestercomposite resin.Finish – Color impregnated black.Lens – Borosilicate glass lens; fully-gasketedtop and bottom.Socket – Bi-pin type (G4).Transformer – Standard 120/12 voltelectronic transformer is furnished.Wiring – Incandescent fixtures are pre-wiredwith high temperature #18 wire.ETL, cETL Listed.DWC2 CompositeDWC2-A Black• 120 Volt• 20 watt maximum• T3 Halogen lamp (included)• With integral transformerHousing – Injection molded polyestercomposite resin.Finish – Color impregnated black.Lens – Ribbed clear acrylic; fully-gasketed.Socket – Bi-pin type (G4).Transformer – Standard 120/12 voltelectronic transformer is furnished.Wiring – Incandescent fixtures are pre-wiredwith high temperature #18 wire.ETL, cETL Listed.Recommended Spacing - DW1 - 15’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 20W T3 13.35 3.94 1.42 .90 .56 .37 .24 .17 -Recommended Spacing - DWC1 - 15’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 20W T3 13.35 3.94 1.42 .90 .56 .37 .24 .17 -Recommended Spacing - DWC2 - 16’Horizontal footcandlesVolt/Lamp 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’120V, 20W T3 10.67 2.73 1.17 .65 .36 .22 .07 .02 -1-5/16"[34mm]5"[127mm]3-5/8"[92mm]1-5/16"[34mm]5"[127mm]3-5/8"[92mm]1-5/16"[34mm]5-5/16"[135mm]1-3/4"[45mm]8-3/4"[222mm]8-3/4"[222mm]7-3/8"[188mm]189

DW3Housing – Single-piece compression molded,fiberglass reinforced polyester composite housing.Concrete Pour Kit – Integral to drive-overguard. Top ring is die-cast stainless steel, bottom portionis extruded steel with integral rings for attaching rebar.Drive-Over Guard – Die-cast stainless steelwith tamper resistant stainless steel screws,mounted to a stainless steel concrete pour kit.Fixture is 3,500-pound live load rated.Lens – Tempered borosilicate frosted dome glass.10-3/4"[273mm]1-7/8"[48mm]Gasket – Single-piece molded silicone U-channel.Socket – Mini-can, G12 or GX23-2 base.Reflector – DW3: formed aluminum reflector.Electrical – Standard high power factor coreand coil mounted on key-slotted removable traywith quick connect harness, high power factor,dipped in moisture-resistant epoxy coating.Fluorescent uses electronic ballast.ETL, cETL Listed.14-1/8"[359mm]7/16"[11mm]10-5/16"7-13/16"11-21/32"25/32"[20mm]1-7/8"[48mm]25/32"[20mm]Pr o d u c t Selection Gu i d eCatalogMaxNumber Description Finish Wattage Lamp socket VoltageDW3-SS Incandescent Stainless Steel Drive-Over Guard Stainless Steel 100w T4 Quartz Mini-Can Base 120VDW3SS35HE HID Stainless Steel Drive-Over Guard Stainless Steel 35w T6 Metal Halide G12 120VDW3SS70HE HID Stainless Steel Drive-Over Guard Stainless Steel 70w T6 Metal Halide G12 120VDW3SS13PLCE Compact Fluorescent Stainless Steel Drive-Over Guard Stainless Steel 13w Compact luorescent GX23-2 Base 120V190

BEACONS1010 AluminumUpper Housing – Die-cast aluminum, or injection molded polyester composite resin, or natural cast bronze.Stainless steel screws in roof for easy top access for relamping.Lower Housing – Die-cast aluminum, or single piece compression molded reinforced polyester composite housing,or natural cast bronze.Lens – Borosilicate glass refractor lens, fully gasketed top and bottom.Gasket – Molded silicone gasket seals glass, top and bottom, and prevents moisture intrusion into the fixture.Finish – Durable powdercoat finish electrostatically applied and bonded by heat fusion thermosetting, to die cast aluminum.Composite beacon HID and fluorescent housing are color impregnated bronze. Cast bronze is natural bronze finish.Socket – Incandescent: medium base. Fluorescent: GX23-2 base. HID: medium base.Electrical – Fluorescent uses 120V core and coil NPF ballast, rated at 0ºC starting temp.Other lamp options and wattages are available. Consult factory for additional fluorescent, or HID options.Mounting – Beacons are partially recessed. Potting compound must be used to seal the conduit wire entry.ETL, cETL Listed.1012 Composite 1019 Cast bronze1010 1012 10198-3/8"[213mm]5-3/32"[129mm]8-3/8"[213mm]5-3/32"[129mm]8-3/8"[213mm]5-3/32"[129mm]1-23/32"[44mm]3-15/16"[100mm]9-1/32"[229mm]2-1/8"[54mm]5-7/16"[137mm]12-1/4"[311mm]1-23/32"[44mm]3-15/16"[100mm]9-1/32"[229mm]191

ISO Fo o t c a n d l e Co n v e r s io n sLight Source Lumens Footcandle ConversionA19 (100w) 1710 1PL13 (13w) 810 0.5E17HPS (50w) 4000 2.3Ph o t o m e t r i c In f o r m a t io nTransverse Distance (ft.)Longitudinal Distance (ft.)Pr o d u c t Selection Gu i d eCatalogNumber Description Finish Wattage Lamp Socket Voltage1010-H Cast Aluminum Beacon, Incandescent. Bronze 100w A19 Medium 120V1010-HF Cast Aluminum Beacon, Compact Fluorescent. Bronze 13w PLC13 GX23-2 120V1012-H Composite Beacon, Incandescent. Bronze 100w A19 Medium 120V1012-HF Composite Beacon, Compact Fluorescent. Bronze 13w PLC13 GX23-2 120V1019-N Cast Bronze Beacon, Incandescent. Natural Cast Bronze 100w A19 Medium 120V1019-NF Cast Bronze Beacon, Compact Fluorescent. Natural Cast Bronze 13w PLC13 GX23-2 120VVS1010-H50 Cast Aluminum Beacon, HID Bronze 50w HPS E17 Medium 120VVS1012-H50 Composite Beacon, HID Bronze 50w HPS E17 Medium 120V192

BEACONSCLB81 AluminumCLB82 AluminumUpper Housing – Die-cast aluminum. Head assembly is mounted directly to lower housing with stainless steel screws.Available in three styles: cone, dome, or hexagonal style.Lower Housing – Durable single piece compression molded reinforced polyester composite. Color impregnated bronze.Optics – Die-cast aluminum louvers with tempered ribbed glass lens. 180° house side shield is supplied with each fixture.Gasket – Molded silicone gasket seals glass and prevents moisture intrusion into the fixture.Finish – Durable powdercoat finish electrostatically applied and bonded by heat fusion thermosetting.Socket – Incandescent and HID: medium base. Fluorescent: GX24q-4 base.Electrical – Standard quad-volt core and coil mounted on removable ballast bracket, with quick connect harness,high power factor, dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts.Mounting – Lower housing may be ground or concrete mounted. Potting compound (provided) must be usedfor sealing wire entryway from moisture intrusion.Voltage Caution – Some local interpretation of the NEC Section 210-6 only permit the use of 120 volt fixtureswhen they are mounted below 8’.Check with local authorities before specifying alternate voltages.ETL, cETL Listed.CLB83 AluminumCLB81 CLB82 CLB83193

Ph o t o m e t r i c In f o r m a t io nIs o f o o t c a n d l e sWATTAGELAMPLUMENS1’2’3’4’5’6’7’Bronze Louvers OpticsWhite Louver Optics100 28 42 50 70 35 50 100 28 42 50 70 35 50Incan. Fluor. Fluor. MH MH HPS HPS Incan. Fluor. Fluor. MH MH HPS HPS1750 1600 3200 3400 5000 2250 4000 1750 1600 3200 3400 5000 2250 40001.2 1.1 2.2 2.3 3.4 1.5 2.7 1.2 1.1 2.2 2.3 3.4 1.5 2.71.0 0.9 1.8 1.9 2.8 1.3 2.2 1.0 0.9 1.9 2.0 2.9 1.3 2.40.5 0.4 0.8 0.9 1.3 0.6 1.1 0.8 0.7 1.4 1.5 2.2 1.0 1.80.2 0.1 0.3 0.3 0.4 0.2 0.4 0.5 0.5 0.9 1.0 1.5 0.7 1.20.02 0.01 0.03 0.03 0.04 0.02 0.04 0.21 0.19 0.38 1.40 0.59 0.26 0.470.02 0.01 0.03 0.03 0.04 0.02 0.04 0.10 0.09 0.19 0.20 0.29 0.13 0.240.01 0.01 0.02 0.02 0.03 0.01 0.02 0.05 0.05 0.09 0.10 0.15 0.07 0.12Bo t t o m View1-7/8"[48mm]25/32"[20mm]25/32"[20mm]Two (2) 3/4”NPT threadedconduit inletsOr d e r i n g Gu i d eV voltageFinish (E) 120Tops (A) Black (F) 208(1) Cone (B) White (G) 240Catalog (2) Dome (H) Bronze Lens and Distribution (H) 277Number (3) Hex (J) Green (AO) Clear, Symmetric Wattage (K) 347 Description LampCLB8 (Specify) (Specify) AO 100I (E Only) 100w INC A19CLB8 (Specify) (Specify) AO 42F* (E,F,G,H) 42w CFL GX24q-4CLB8 (Specify) (Specify) AO 35S (E Only) 35w HPS E17CLB8 (Specify) (Specify) AO 50S (E Only) 50w HPS E17CLB8 (Specify) (Specify) AO 70S (Specify) 70w HPS E17CLB8 (Specify) (Specify) AO 100S (Specify) 100w HPS E17CLB8 (Specify) (Specify) AO 50H (Specify) 50w MH E17CLB8 (Specify) (Specify) AO 70H (Specify) 70w MH E17CLB8 (Specify) (Specify) AO 100H (Specify) 100w MH E17*Accepts 26,32 and 42w PLT lamps.194

eaconsRR701 AluminumRB711 AluminumRL721 AluminumUpper Housing – Die-cast aluminum. Head assembly is mounted to lower housing with stainless steel screws which allow easy access for re-lamping.Lower Housing – Durable single piece compression molded reinforced polyester composite. Color impregnated bronze.Optics – Cylindrical fresnel lens projects even illumination in a 360º pattern (RR701). An integral hood directs low level illuminationoutward in a 180º arc (RB711). Integral louvers shield the light source, directing light down and outward in a 360º pattern (RL721).Gasket – Molded silicone gasket seals glass and prevents moisture intrusion into the fixture.Finish – Durable powdercoat finish electrostatically applied and bonded by heat infusion thermosetting. Consult factory for additional finishes.Socket – Incandescent and HID: medium base. Fluorescent: GX24q-4 base.Electrical – Standard quad-volt core and coil mounted on removable ballast bracket, with quick connect harness,high power factor, dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts.Mounting – Beacons are partially recessed. Potting compound must be used to seal the wire entry.Voltage Caution – Some local interpretation of the NEC Section 210-6 only permit the use of 120 volt fixtureswhen they are mounted below 8’. Check with local authorities before specifying alternate voltagesETL, cETL Listed.6-5/8"[168mm]6-5/8"[168mm]RR701 RB711 RL7216-5/8"[168mm]5 3/4"[146mm]5-3/4"[146mm]5 13/16"[174mm]2-1/8"[54mm]5-7/16"[138mm]7-1/16"[179mm]2-1/8"[54mm]5-7/16"[138mm]7-1/16"[179mm]2-1/8"[54mm]5-7/16"[138mm]7-1/16"[179mm]195

Ph o t o m e t r i c In f o r m a t io nWATTAGELAMPLUMENSABCDEFGSymmetric Optics75 42 50 70 100Incan. Fluor. HPS MH MH1220 3200 3300 5000 85002.00 5.25 5.41 8.20 13.931.00 2.62 2.70 4.10 6.970.75 1.97 2.03 3.07 5.230.50 1.31 1.35 20.5 3.480.33 0.87 0.89 1.35 2.300.25 0.66 0.68 1.02 1.740.10 0.26 0.27 0.41 0.70Bo t t o m ViewTwo (2) 1/2"NPF ConduitInlets5-7/16"[138mm]2-1/8"[54mm]Or d e r i n g Gu i d eFinish(A) Blackvoltage(B) White (E) 120(G) Verde (F) 208Catalog (H) Bronze Lens and Distribution (G) 240Number (J) Green (AO) Clear, Symmetric Wattage (H) 277 Description LampRR701 (Specify) AO 75I (E Only) 75w INC A19RR701 (Specify) AO 42F* (Specify) 42w CFL GX24q-4RR701 (Specify) AO 35S (E Only) 35w HPS E17RR701 (Specify) AO 50S (E Only) 50w HPS E17RB711 (Specify) AO 75I (E Only) 75w INC A19RB711 (Specify) AO 42F* (Specify) 42w CFL GX24q-4RB711 (Specify) AO 35S (E Only) 35w HPS E17RB711 (Specify) AO 50S (E Only) 50w HPS E17RL721 (Specify) AO 75I (E Only) 75w INC A19RL721 (Specify) AO 42F* (Specify) 42w CFL GX24q-4RL721 (Specify) AO 35S (E Only) 35w HPS E17RL721 (Specify) AO 50S (E Only) 50w HPS E17*Accepts 26,32 and 42w PLT lamps.196

Line VoltageUnderwater Lighting

Add brilliance to your large-scale fountain or water featurewith our line voltage underwater fixtures. Made of nickel bronze,they’re practically indestructible – designed to last, not leak.Be sure to see our underwater applications section for ideason Philips Hadco underwater installations.

underwaterUW1100/UW1250 Cast BronzeUW1100-N Natural Cast BronzeUW1250-N Natural Cast Bronze• 120 Volt• 250 watt maximumUW 1100 - 100W T4 Lamp (Included)UW 1250 - 250W T4 Lamp (Included)Housing – Cast nickel bronze guard, spunstainless steel housing, stainless steel fasteners.Base – Cast nickel bronze swivel base.Finish – Natural finish.Lens – Tempered clear convex glass(see below for optional colored lenses).Socket – Porcelain mini-can base.Wiring – Standard 10 ft. 16-3 STO-WA water resistant cord.Fixture is pre-wired and potted to prevent water entry.Thermal Cutoff – Furnished as standard on all fixtures.Enables fixture to be used in accordance with NEC Article 680-51in installations without an external low-water cutoff.NOTE: Underwater fixtures are not for use in swimmingpools or spas due to exposed wiring.ETL, cETL Listed.catalog no. descriptioncatalog no. descriptionUW2100/UW2250 Cast BronzeUW2100-N Natural Cast BronzeUW2250-N Natural Cast Bronze• 120 Volt• 250 watt maximumUWL2100 - 100W T4 Lamp (Included)UWL2250 - 250W T4 Lamp (Included)Housing – Cast nickel bronze guard, spunstainless steel housing, stainless steel fasteners.Niche – Stainless Steel with cast nickel bronze trim.Finish – Natural finish.Lens – Tempered clear convex glass(see below for optional colored lenses).Socket – Porcelain mini-can base.Wiring – Standard 10 ft. 16-3 STO-WA water resistant cord.Fixture is pre-wired and potted to prevent water entry.Thermal Cutoff – Furnished as standard on all fixtures.Enables fixture to be used in accordance with NEC Article 680-51in installations without an external low-water cutoff.NOTE: Underwater fixtures are not for use in swimmingpools or spas due to exposed wiring.ETL, cETL Listed.catalog no. descriptioncatalog no. descriptionUWBLU Blue LensUWGRN Green LensUWBLU Blue LensUWGRN Green LensUWRED Red LensUWAMB Amber LensUWRED Red LensUWAMB Amber Lens6"[152mm]7-7/16"[189mm]25ºMax. AimingAngle (AnyDirection)5-1/2"[140mm]5-1/8"[130mm]199

UNDERWATER AccessoriesJBH1 Junction BoxTwo (2) lights, 10.5 cubic inches. Single 3/4” NPTbottom. Two (2) 1/2” or 3/4”, one (1) each end.Please specify factory-machined conduit entrywaysupon ordering.1-1/4"[32mm]WNTOPVIEWEJBH2 Junction BoxFour (4) lights, 21.3 cubic inches. Two (2) 1” max.NPT bottom. Four (4) 1/2” or 3/4”, one (1) each end.Please specify factory-machined conduit entrywaysupon ordering.1-3/8"[35mm]2"[51mm]WNTOPVIEWESJBH10 Junction BoxTwo (2) lights, 21 cubic inches. Single 3/4” NPTbottom. Two (2) 1/2” or 3/4”, one (1) each end.Please specify factory-machined conduit entrywaysupon ordering.W2-1/32"[52mm]NTOPVIEWE3-3/8"[86mm]4-3/8"[111mm]S2-15/16"[75mm]4-3/8"[111mm]4-3/4"[121mm]4-3/4"[121mm]S3-1/2"[90mm]4-3/4"[121mm] 3-7/8"[98mm]4-7/8"[124mm]S3-1/4"[82mm]4-7/8"[124mm]CCH50Machined Naval Brass Cord Seal-Neoprenepacking seal, brass friction ring. 1/2” NPT for usewith 16-3 STO-WA entry into junction box.CCH50FStrain Relief, Machined Naval Brass CordSeal-Neoprene packing seal, brass friction ring.1/2” NPTx 16-3 cord.MA1Re-enterable encapsulant for inground installations.Two-part field mixable material in one convenientpackage.200

UNDERWATER APPLICATIONSW a t e r f a l l s a n d Fo u n t a i n s —L i n e Vo l t a g eAerated WaterfallsSheet WaterfallsAe r a t e d a n d Sheet Wa t e r f a l l sWaterfall light WattageHeight A B C Spacing Required1’ 2” NR 6” 2’ 2502’ 4” NR 8” 2’ 2503’ 6” 16” 12” 3’ 2504’ 8” 18” 16” 3’ 2505’ 10” 20” 18” 4’ 250NR=Not Recommended.FountainsFo u n t a i n sSpray Quantity Wattage WattageHeight of Lights (Portable) (Niche)0-3’ 1 250 2503-10’ 2 250 NR10-20’ 3 250 NRNR=Not Recommended.201

J u n c t i o n Bo x a n d Fi x t u r e In s t a l l a t i o n —L i n e Vo l t a g eBase or Yoke MountDetail: Base or Yoke Mount FixturesNiche Mount/Fountains OnlyJu n c t io n Bo x Selection Gu i d eAll conductors are to be considered in calculations.Conductor Size Req. Space in BoxA.W.G.For Each Conductor18 1.5 CU.IN.16 1.75 CU.IN.14 2.0 CU.IN.12 2.25 CU.IN.10 2.5 CU.IN.8 3.0 CU.IN.6 5.0 CU.IN.202

Line VoltageAccessories and Photometrics

Just as important as our vast selection of fixtures, Philips Hadco accessoriesgive you all the options you need to finish the job with safety and confidence.Browse our array of stakes, junction boxes and other mounting accessories.You’ll find the right accessories to implement almost any installation you can imagine.

mounting and connectionS3AS3HS3BS3NS35BM0028AS3 MOUNTING stAKESuitable for wet locations. Heavy wall, impact-resistant PVC. Threaded 1/2” NPT [13mm] hub with ground wire.Slanted bottom accepts conduits of different depths. PVC stabilizers included (no concrete needed).3” O.D. [76mm] x 19” [483mm].* Accepts “Y” or “T” fitters (by others). Available in white, black, bronze,natural brass or verde. May be painted additional colors with water base paint.Use with ETL listed wet location fixture. ETL and cETL Listed.*S35B 3-1/2” O.D. [89mm] x 19” [483mm]Portable line voltage stake. Cast aluminumwith 8’ [2440mm] 3-wire power cord and plug.8” [203mm] long with 1/2” NPS [13mm]conduit inlet. Black powdercoat finish.BI1Hot dipped galvanized cast iron junction box.4” [102mm] square x 3” high [76mm] with1/2” NPS [13mm] top inlet. Two (2) 1/2” NPT[13mm] bottom inlets. Used with aluminumor composite fixtures.BI2Hot dipped galvanized cast iron junction box.4” [102mm] square x 3” high [76mm] with1/2” NPS [13mm] top inlet. Two (2) 3/4” NPT[19mm] bottom inlets. Used with aluminumor composite fixtures.BI3Hot dipped galvanized cast iron junction box.4” [102mm] square x 3” high [76mm] with1/2” NPS [13mm] top inlet. Four (4) 1/2” NPT[13mm] side inlets and two (2) 1/2” NPS [13mm]bottom inlets. Used with aluminumor composite fixtures.BI4Hot dipped galvanized cast iron junction box.4” [102mm] square x 3” high [76mm]with 1/2” NPS [13mm] top inlet.Two (2) 1/2” NPT [13mm] side inletsand two (2) 1/2” NPS [13mm] bottom inlets.Used with aluminum or composite fixtures.M0029Cast aluminum junction box.4” [102mm] x 2-1/4” [57mm] with 1/2” NPT[13mm] top inlet and four (4) 1/2” NPT [13mm]side inlets.MA22Silicone-filled wire connectors. Necessaryto protect splicings from moisture and oxidation.Handles up to 10 gauge wire.Boxed twenty-five (25) per carton.205

TM2TM2-A BlackTM2-G VerdeTM2-H Dark BronzeLine voltage tree mount cast aluminumjunction box. Combination lag screwswith hex nuts included.TMC2HComposite line voltage tree mount junction box.Combination lag screws with hex nuts included.May be used with tree strap (TMS10).MF1Pack of twelve (12) combination galvanizedlag screws with hex nuts for attaching canopiesand ballast boxes in trees.TMS10Black nylon tree strap, a non-intrusive way of mountingline or low voltage bullyte fixture to a tree.• 10 feet, field-cut to length • 500 lbs strength test• Nylon strap with high • Use with: TMC2Hstrength, durable ABSadjustable fastenerMA1Re-enterable encapsulant for inground installations.Two-part field mixable material in one convenientpackage.MA4Corrosion preventive compound.Two-ounce tube. Specially formulatednon-conductive sealant and corrosion preventative.For use on sockets and electrical contacts.206

CUSTOM AND MODIFICATIONW e’ll He l p Yo uF o l l o w Yo u r Vision.For over 50 years, Philips Hadco fixturesdeveloped as a direct outgrowth of close, ongoinginvolvement with lighting designers and specifiers.Many Philps Hadco new products have rootsin specials and custom projects.Philips Hadco has complete custom and modificationcapabilities for custom projects. Our team ofcustom engineers, technical specialists, and customersupport are available to answer questions and offeradvice about application, lamp placement and lightingobjectives. In addition, we apply the latestmanufacturing techniques and engineering softwareto deliver your request as efficiently as possible.At Philips Hadco, our integrated manufacturingfacilities can make your vision a reality, producinglighting fixtures that reflect your style and imagination.Don’t hesitate to contact your Philips Hadcorepresentative for more information.207

208

PHOTOMETRIC DATA209

photo creditsPHILIPS HADCO would like to thank the following peopleand organizations who contributed to the photographyfeatured in this catalog.Gene Coghlan, Chalfont, PADave Deporter - Genlyte Baltimore/Washington, Columbia, MDRob Ellis - Architectural Landscape Lighting & Design, Miamitown, OHFred Massey - Genlyte Orlando, Winter Park, FLDave Murphy and Associates, Dumont, NJLightscape, Libertyville, ILNelson King and Associates, Lincolnshire, ILKing Lighting, Cincinnati, OHSignature Lighting, Novi, MITerra Forma, Richmond, VAPhilips Hadco is always looking for quality residential and commercial landscape application photographythat features Philips Hadco products. To find out more information on submitting photographyof your work, please contact your Philips Hadco representative.210

IndexProducts10 10 ..................................... 19 110 12 ..................................... 19 11019 ..................................... 19 11020 ..................................... 115A42 ..................................... 177A43 ..................................... 178AAL1 .....................................34AL4. ......................................76AL4D3 ....................................21AL4 1. .....................................76AL42 .....................................83AL43 .....................................83AUL1 .....................................35B1 . ...................................... 113B3 ....................................... 114B4 .............................18, 116, 117, 118BL1 .................................30, 31, 32BL16 ......................................28BL36. .....................................29BL50 16. ...................................27BL616 .....................................26BL711 .....................................25BL7D1 .................................... 18BL756. ....................................26BLN5D4 .................................. 19BLW5D4 .................................. 19BPL36. ....................................30BT 1 ...................................... 112BT5016. .................................. 111BT7 11 .................................... 111BU 1. ..................................... 114BU3 ..................................... 115BU4 . .................................119, 120BUL1 ................................ 19, 31, 32BUL16. ....................................27CAL1 .....................................34CB100. ................................59, 159CL81 ..................................... 18 1CL82 .................................... 18 1CL83 .................................... 18 1CLB8 1 ................................... 193CLB82 ................................... 193CLB83 ................................... 193CPL12. ....................................78CPL21 .....................................78CUL2 .....................................67CUL3 .....................................67CUL4 .....................................67CUL6 .....................................68CUL7 .....................................68CUL9 .....................................68CUL10 ....................................69CUL16 ....................................28CUL20 ....................................49DAL1 .....................................50DB14. .................................... 183DB21. .................................... 183DB30 .................................... 183DCL1 .....................................50DL1 .......................................36DL4 ......................................53DL5 ......................................53DRL1. .....................................37DRL2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37DSL1 ......................................51DSL2 .....................................37DUL1 .....................................50DW1. .................................... 189DW3 .................................... 190DWC1 ................................... 189DWC2. .................................. 189DWCL1 ...................................86DWCL2. ..................................86DWL1. ....................................86EL1 .......................................25EL2 .......................................74EPL1 ......................................73EW1N ................................... 111EWB4. ................................... 163EWL1 .....................................38EWR4 ................................... 165FUL1 ......................................81GABL16 ...................................29GACL1 ....................................52GACL2 ...................................52GADL1 ....................................49GADL2 ...................................49GADL4 ...................................53GADL5 1 ..................................54GADL52 ..................................54GADL61. ..................................54GADL62 ..................................54GAGL1 ....................................73GAHL1 ....................................36GAL3 .....................................69GAML1. ...................................70GAML2 ...................................70GAML3 ...................................70GAML4 ...................................71GAML5 ...................................71GASL1 ....................................72GASL4 ....................................72GASL5 ....................................72GASUN ...................................95GATL1 ....................................73GAWL1 ...................................35I2. ........................................141i2.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 143I3. ....................................... 145I4. ....................................... 147I5. ....................................... 149IL116 ......................................41IL136. .....................................41IL336 .....................................43ILN5D4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20ILW5D4. ..................................20IUL516 ....................................43LL20 ......................................96LL48 ......................................96LLL ....................................38, 56ML4D3. ...................................21MSL12. ....................................77MSL18. ....................................78MU3. .................................... 176MU5 .................................... 175MUL4 ....................................75MUL5 .................................75, 76P3 ....................................... 178P39 ...................................... 179PL3 .......................................85PL39. .....................................85Q39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179QF59 .................................... 179R3. ...................................... 178R30. ..................................... 179R39. ..................................... 179RB30. .................................... 185RB71 ..................................... 187RB711 .................................... 195RFL1 ......................................55RL116 .....................................95RL13 ......................................52RL3. ......................................84RL336. ....................................95RL4. ......................................84RL72. .................................... 187RL721 .................................... 195RLL1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55RLL2 .....................................55RR70 .................................... 187RR701. ................................... 195RRB1. .................................... 167RRB3 .................................... 169RRBL1 .....................................57RRC1 .................................... 167RRC3 .................................... 169RRCBL1 ...................................56RRCL1 ....................................57RRF1 ..................................... 167RRFL1 .....................................57RSB2. .................................... 155RSB3. .................................... 16 1RSBL2. ....................................59RSC2 .................................22, 157RSC3 . ................................... 16 1RSCL2 ....................................61RSF2. .................................22, 155RSFL2. ....................................59RSS2. .................................22, 155RSV2 .................................22, 157RSVL2 ....................................61SPL1 ......................................79SPL18 .....................................79SPL4 ......................................74SPL5 ......................................74SRL3. .....................................51SRL4. .....................................51T39. ..................................... 177TL19 ......................................82TL39. .....................................82TR5. ..................................... 177TRL4 .....................................77211

TRL4D3. .................................. 19TRL5 .....................................77TU3 ..................................... 176TUL1 .....................................80TUL3 .....................................81ULW5D4 .................................21UW 1100. ................................. 199UW1250 ................................. 199UW2100 ................................. 199UW2250 ................................. 199UWL1. ....................................89UWL1075 .................................90UWL1100. .................................90UWL2075 .................................90UWL2100 .................................90UWUL516 .................................89WA1 ..................................... 127WA2 ................................ 128, 129WAF1 .................................... 127WAF13. .................................. 127WAM1 ................................... 126WAML14 ..................................33WAMT14. ................................ 125WA/WB3-HF ............................. 13 1WA/WB3-HS ............................. 135WA/WB3-VF ............................. 133WBM1 ................................... 126WBML14 ..................................33WBMT14 ................................. 125AccessoriesABH ......................................121ABM. .....................................121BI1 .......................................205BI2 ......................................205BI3 ......................................205BI4 ......................................205CCH50 ...............................91, 200CCH50F ..............................91, 200CP2 ..................................36, 141CP3 .................................143, 145CP4 ..................................... 147CP5 ......................................37CPS2 .................................36, 141CPS3 ................................ 143, 145CPS4 .................................... 147I3ICL. ................................143, 145I4ICL .................................... 147I4IDL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147I4SRL .................................... 147I5CMF ................................... 149I5CRG ................................... 149I5DL ..................................... 149I5DS ..................................... 149I5DSG ................................... 149I5HCL ................................... 149I5iGL. .................................... 149I5SRG. ................................... 149IAS 16 ....................27, 28, 30, 31, 32, 112IBH .......................................121IBL1 ...................................36, 141IBL16. ....................27, 28, 30, 31, 32, 112IBM. ......................................121ICG16 ....................27, 28, 30, 31, 32, 112ICG20 ............................141, 145, 147ICG30 ............................141, 145, 147ICG36 ............................36, 141, 145ICG38 ........................... 143, 145, 147ICGFL. ................................... 147ICGSP ................................... 147IG30H ....................................37IG3H .....................................37IL3H ......................................37IS1H ..................................36, 141IS3H ................................. 143, 145IS4H ..................................... 147ISL16 .....................27, 28, 30, 31, 32, 112ISL4. ..................................... 147JBH 1 ..................................91, 200JBH2 ..................................91, 200LVC3 .................................... 10 1LVC4 .................................... 10 1M0028A. .................................205M0029 ...................................205M0040 ................................... 102M0041 ................................... 102MA1 ..............................91, 200, 206MA2 ..................................... 102MA22. ............................... 10 1, 205MA4 .................................102, 206MAKES ..........21,57,59,61,63,155,157,161,163,. . . . . . . . . . . . . . . . . . . . . . . . . . . 165,167,169,171,172MAKM . . . . . . . 21,57,59,61,63,65,155,157,159,161,. . . . . . . . . . . . . . . . . . . . . . .163, 165,167,169,171,172MAKNS . . . . . . 21,57,59,61,63,65,155,157,159,161,. . . . . . . . . . . . . . . . . . . . . . .163, 165,167,169,171,172MC1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102MC1N. ................................... 102MF1 ..................................102, 206MGM1 .................................26, 28ML1 ................................26, 111, 112ML3 .................................. 112, 113ML4 ....................... 114, 115, 116, 117, 118ML7 ...................................25, 26MLB1. ..................................26, 28MLS1 ...................................26, 28MLS2 ..................................26, 28MW11.....................................33MW12 ....................................33MW31 ................................... 137MW32 ................................... 137MW33 ................................... 137MW34 ................................... 137PC1 ...................................... 100PC15. .................................... 100PC3 ..................................... 100PF3-BD .................................. 138PF3-GS. .................................. 138PF3-PS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138PT21 ..................................... 138PT22. .................................... 138PT23. .................................... 138S1 ....................................... 10 1S12 ...................82,83,85,177,178,179,180S24 ..................82,83,85,177,178,179,180S3 .......................................205S36 ...................82,83,85,177,178,179,180S6 ....................................... 10 1S7 ....................................... 10 1S7N ..................................... 10 1S8 ....................................... 10 1S8N ..................................... 10 1SCW100-12 ............................... 102SCW500-10. .............................. 102SCW500-12. .............................. 102SJBH 10 ................................91, 200SS18 ..................................... 138ST18 ..................................... 136T5. ...................................... 100T6. ...................................... 100TA21. .................................... 136TA22 .................................... 135TB100-12 ................................. 100TBC303-15 ............................... 100TBC603-15 ............................... 100TC1283-22. ............................... 100TC151-12 ................................. 100TC151-12TP ............................... 100TC1583-22. ............................... 100TC344-15. ................................ 100TC383-22 ................................ 100TC644-15. ................................ 100TC683-22 ................................ 100TC944-15. ................................ 100TC983-22 ................................ 100TCS301 .................................. 100TCS601 .................................. 100TCS901 .................................. 100TM1H .................................... 102TM2 .....................................206TM3 ..................................... 137TMC2H ..................................206TMS10 ...............................102, 206TS375-12 ................................. 10 1TSS1283-22 ................................98TSS1583-22 ................................98TSS344-15 .................................98TSS383-22. ................................98TSS644-15 .................................98TSS683-22. ................................98TSS944-15 .................................98TSS983-22. ................................98UWAMB ............................. 84, 203UWBLU. ............................. 84, 203UWGRN. ............................ 84, 203UWRED ............................. 84, 203WB. ..................................... 122212

Notes

Notes

Notes

Notes

MemberISO 9001Registered© 2010 Philips GroupAll rights reserved. Certain products illustrated in this catalog may be protected by applicable patents and patent pending.Philips Hadco will aggressively defend all of its intellectual property. We reserve the right to change details of design,materials and finishes in any way that will not alter installed appearance or reduce function and performance.Philips Hadco100 Craftway DriveP.O. Box 128Littlestown, PA 17340Phone: 866-423-2658Fax: 717-359-9289www.hadco.comHNL 0610 10Printed in U.S.A.