STARCUT 500/730 - Spearhead Machinery Ltd
STARCUT 500/730 - Spearhead Machinery Ltd STARCUT 500/730 - Spearhead Machinery Ltd
Spearhead Star-Cut 500 & 730Attaching To The TractorLow DrawbarWhen attached to the low drawbarof the tractor always use theparallel linkage bar attached tothe lower hole on the hitch plate.High DrawbarWe recommend that the parallellinkage bar is removed and thehitch is locked by replacing the pinin the middle hole.When using the high drawbar it isnot possible to use the parallellinkage, as when the machine isfull raised the PTO shaft may bedamaged.8
Spearhead Star-Cut 500 & 730Attaching To The TractorWings; red banded hose, single actingspool c/w floatWheel Axle; blue and yellow banded hose,double acting spool c/w floatConnect the hydraulic hoses. One to a single acting service, with a floatfacility for wings. The other pair to a double acting service for the axle againwith float to lower the wheels. This is particularly important the spool valveallows the machine to follow the ground contours.9
- Page 1 and 2: Spearhead Star-Cut 500 & 730STARCUT
- Page 3 and 4: Spearhead Star-Cut 500 & 730Content
- Page 5 and 6: Spearhead Star-Cut 500 & 730Recomme
- Page 7: Spearhead Star-Cut 500 & 730Introdu
- Page 11 and 12: Spearhead Star-Cut 500 & 730Setting
- Page 13 and 14: Spearhead Star-Cut 500 & 730Operati
- Page 15 and 16: Spearhead Star-Cut 500 & 730Transpo
- Page 17 and 18: Spearhead Star-Cut 500 & 730Service
- Page 19 and 20: Spearhead Star-Cut 500 & 730Every 8
- Page 21 and 22: Spearhead Star-Cut 500 & 730MP6 Bla
- Page 23 and 24: Spearhead Star-Cut 500 & 730English
- Page 25 and 26: Spearhead Star-Cut 500 & 730English
- Page 27 and 28: Spearhead Star-Cut 500 & 730Storage
- Page 29 and 30: Spearhead Star-Cut 500 & 730Spearhe
- Page 31 and 32: Spearhead Star-Cut 500 & 73031
- Page 33: Spearhead Star-Cut 500 & 730Spearhe
<strong>Spearhead</strong> Star-Cut <strong>500</strong> & <strong>730</strong>Attaching To The TractorLow DrawbarWhen attached to the low drawbarof the tractor always use theparallel linkage bar attached tothe lower hole on the hitch plate.High DrawbarWe recommend that the parallellinkage bar is removed and thehitch is locked by replacing the pinin the middle hole.When using the high drawbar it isnot possible to use the parallellinkage, as when the machine isfull raised the PTO shaft may bedamaged.8