USER MANUAL Dual Ethernet I/O Module Installation and ... - Sixnet

Screw Terminals (11 – 44) for Specific ModulesThe table below lists the available I/O modules. Click on the link (right column), or turnto pages 15-17, to display the associated Screw Terminal Assignment table.PartNumberE2/EB-DI DO AI AO DescriptionMIX24880 24 8 8 Double density combinationI/O (see Note 1)MIX24882 24 8 8 2 Double density combinationI/O w/2 AO’s (see Note 1)Link toScrew TerminalAssignment TableLink to Table ALink to Table A32DI24 32 32 inputs double density Link to Table B16DI24 16 Isolated channels, 10- Link to Table C30VDC/VAC16DIAC 16 Isolated channels, 120 VAC Link to Table Cnominal32DO24 32 32 outputs double density Link to Table B16DO24 16 Isolated channels Link to Table C16DORLY 16 Isolated low-voltage relays Link to Table H32AI20M 32 4-20mA double density Link to Table Bfused inputs32AI10V 32 Voltage Inputs (other ranges Link to Table Bare available as specialorder)16AI20M 16 4-20mA high density fused Link to Table Dinputs8AO20M 8 4-10mA analog outputs Link to Table D16AI8AO 16 8 16 inputs, 8 outputs (4- Link to Table D20mA) range10RTD 10 10 2-3 wire inputs Link to Table E16ISOTC 8/16 8 or 16 isolatedLink to Table Fthermocouple and millivoltinputs16ISO20M 16 16 isolated analog inputs Link to Table GNOTES1. 24 maximum DI’s are listed, 8 of which can be configured as either DI or DO.2. Modules listed may include an optional Etherbus ® Power over Ethernet (PoE) feature (EB-).EtherTRAK-2 I/O Module User Manual Page 17 of 37 Last Revised: 05-NOV-2010Sixnet Technology Park 331 Ushers Ballston Lake, NY 12019 USA +1-518-877-5173 support@sixnet.com