USER MANUAL Dual Ethernet I/O Module Installation and ... - Sixnet
USER MANUAL Dual Ethernet I/O Module Installation and ... - Sixnet
USER MANUAL Dual Ethernet I/O Module Installation and ... - Sixnet
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Configuring the <strong>Module</strong> for Sinking <strong>and</strong> SourcingOnce the module is reinstalled <strong>and</strong> power is applied, the module will automatically read the DICOM jumper setting <strong>and</strong> configure the module accordingly.If you are configuring the module from the web server, you can view the jumper setting from the“Discrete Options” configuration page. Note that the parameter “Source/Sink mode (DI 1-8only)” will display the corresponding jumper setting as “Sink” or “Source”.If you are configuring the module from the I/O Tool Kit Windows software, in the DiscreteOptions configuration screen, in the "Source/Sink mode" drop down menu, select the mode thatmatches the jumper setting, otherwise a conflict will arise on the affected discrete inputs. The“Follow the Jumper” selection will tell the firmware to use the setting as it is set in the hardwarejumper. Otherwise this configuration setting should match what the hardware jumper is set to.EtherTRAK-2 I/O <strong>Module</strong> User Manual Page 12 of 37 Last Revised: 05-NOV-2010<strong>Sixnet</strong> Technology Park 331 Ushers Ballston Lake, NY 12019 USA +1-518-877-5173 support@sixnet.com
Change language