MUHAMMAD SALMAN ARSHID - University of Engineering and ...

MUHAMMAD SALMAN ARSHIDHose # 155 Gulberg Khanewal,58150, Punjab, PAKISTANPhone: (++92) 321 6897792, e-mail: salman.kk15@gmail.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age/CGPA2007-11 B.Sc. Electronics Engineering(Cont.)University of Engineering & Technology, Taxila. 3.52/4.07thSemester2004-06 H.S.S.C. (Pre-Engineering) Govt. Islamia Degree College Khanewal 75.722002-04 S.S.C. (Science Group) Govt. Model High School Khanewal 74.35Final Year Project:Industrial Study of Distributed Control SystemsClass Projects:• Fire alarm System• Study of High Power Amplifiers• Study of Industrial Temperature Sensors• Elevator Control Using PLCInternships:• PEL Pvt Ltd LahoreTechnical Skills:• MATLAB, PLC, Optisystems, Verilog soft wares• AutoCAD• Microsoft Office (Word, Excel, Power Point)Honors, Awards and Achievements:• Champions of Football And Volley ballExtra Curricular Activities:• Remained member of Campus Environment Protection Society• Member of Campus Sports Committee• Lead the teams responsible for Organizing Farewell Party

M. Raqib Irshad64- Jamil park near mansoorah Multan chungi Lahore Pakistan.Ph # 0334-9826962 e-mail: raqib.jutt_engr@yahoo.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age /C.GPA2007-11 B.Sc. Electronics Engineering University of Engineering & Technology, Taxila 3.39 C.GPA7 th semester2004-06 H.S.S.C. (Pre-Engineering) Govt Science college wahdat road Lahore. 76.09%2002-04 S.S.C. (Science Group) Govt central model school lower mall Lahore. 71.17%Final Year Project:Industrial Control of “Distributed Control System”.Class Projects:• Study the High Power Amplifiers• Fire Alarm System• Study of the Temperature Sensors used in Industry• Elevator Control using PLCWork Experience:• PELL Pvt.Ltd LahoreTechnical Skills:• PLC, Matlab, Opto System, Verilog software’s• AutoCAD• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:• Volunteered in establishing Engineering Electronics Laboratory in the universityHonors, Awards and Achievements:• Organizing the world Environment day in the UniversityExtra Curricular Activities:• Lead the teams responsible for Organizing Farewell Party• Executive Member of “Engineering Forum For Advanced Research”• Media Coordinator of “Environment Protection Society ”• Executive Member of Hiking Club

ABDUL REEHANHouse no 203.Mohallah sheikh lahori chenab road Jhang Sadar, Punjab, PakistanPhone: (++92) 336-4214363, e-mail: tariq_saf@yahoo.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age/CGPA2007-11 B.Sc. Electronics Engineering University of Engineering & Technology, Taxila. 2.83/42004-06 H.S.S.C. (Pre-Engineering) Faran Model College,Jhang 69.32002-04 S.S.C. (Science Group) Al-Hamd Model School Jhang Sadar 81.41Final Year Project:Data encryption and decryption using microcontroller 8051.Class Projects:Traffic Light Control System through PLCWork Experience:Two months experience at Pak Elektron Limited (PEL) in Quality ControlDepartments.• Transformer assembling and testing• Switchgear panels designing & assembling• Energy meter programming, assembling & calibration.Technical Skills:1. During 4 years university programme designing and presenting the presentations ondifferent technical, communication topics by using MS Office & Microsoft Applications.2. Doing a work on Matlab application like digital filter designing in digital signalprocessing, digital image processing course, signals and system and control system andetc3. Have some course work on Optisystem software in optoelectronics subject.4. Different type of programmes designing on c++Professional Activities/ Experience:During the course of internship, apart from getting practical knowledge about my area ofinterest. I also attended the Youth Empowerment Programme (YEP), a full day workshop which includes “Resume Writing Skill. Interview Preparation Skill and EmotionalIntelligence” at PEL.Extra Curricular Activities:• Lead the teams responsible for Organizing Farewell/Welcome Parties• Captain of the college cricket team.

AQEEL UR REHMANHose # 36,Block # 8,housing colony Bhakkhar. , Punjab, PAKISTANPhone: (++92) 334-7601760, e-mail: engr.aqeelrehman@yahoo.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an professional and dynamic organization that can help me nurture myprofessional skills by providing me enabling and challenging environment, where I cancontribute by applying my knowledge as well as groom my technical , interpersonalabilities.and prove my leadership qualitiesEducation:Session Degree/Certificate Institution %age2006-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, TaxilaSub campus chakwal.81.72(c.g.p.a)2005-06 H.S.S.C. (Pre-Engineering) Pakistan steel cadet college karachi 74.902002-04 S.S.C. (Science Group) Pakistan steel cadet college karachi 82..44Final Year Project:Optimization and fabrication of cncClass Projects:‣ Design and manufacturing of fire fighting robot‣ Design and manufacturing of automatic two storey elevator‣ Study of working of printers‣ Study Project on the working. And mechanism of shaper and planner.‣ Study Project On responsibilities of engineer o as manager, leader andconsultant.‣ Study project of automatic concrete mixing machine.‣ Study project of light sensors‣ Study project of human resource managementWork Experience:• Worked as Internee in heavy industries taxilaTechnical Skills:• CNC , PLC software• C++, matlab• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:• Volunteered in establishing robotics Laboratory in the university• Visits to KSB pumps Hassan abdal, dg cement factory klar khar, mastertiles gujranwala and .kohenoor taxtile mills chakwalHonors, Awards and Achievements:Most disciplined student of yearExtra Curricular Activities:• Lead the teams responsible for Organizing Farewell/Welcome Parties• Member Dramatics society

Muhammad Asad IrshadAddress: Shaheen karyana Store Ghala MandiSangla Hill, Nankana Sahib.Mob: +923215871005E-mail: asadirshad7@gmail.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:Seeking a job in a professional and dynamic organization where I can serve as well asgroom my technical and interpersonal abilities. Areas of Interest industrial automationand control.Education:Session Degree/Certificate Institution %age2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 2.88gpa2004-06 H.S.S.C. (Pre-Engineering) Govt. Islamia College Civil Lines Lahore. 62.542002-04 S.S.C. (Science Group) GHS no.1 sangla hill District Nankana sahib. 78.23Final Year Project:CNC machine.Class Projects:• Study the construction and working of fire fighting robot• Control motor speed using PWM.• Study of microelectromechanical systems (MEMS)• Study Project team building• CNC programming, PLC, Petri net modeling.Work Experience: Sapphire fibres dyeing unit Pvt. Ltd LahoreTechnical Skills:• CNC , PLC software• AutoCAD• Matlab• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:• Volunteered in establishing robotics Laboratory in the university• Developed ability to produce reports and presentations to a professional standard.Honors, Awards and Achievements:• Remained the top student of school from 2002 to 2004Extra Curricular Activities:• Lead the teams responsible for Organizing Farewell• Campus Sports Committee Member

MUHAMMAD FEHZAN RASHIDHose # 02,Block V,Street J,New-Multan,Multan Punjab, PAKISTANPhone: (++92) 3226166857, e-mail: fehzanrashid@gmail.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age2007-11 B.Sc. Electronic Engineering University of Engineering & Technology, Taxila. 3cppa2004-06 H.S.S.C. (Pre-Engineering) Govt. College Multan 72%2001-03 S.S.C. (Science Group) F.G.Boys Public School,Multan Cantt 73.3%Final Year Project:Real time object identification & trackingClass Projects:• Implementation of water pollution detector• Fire fighting robot• Control motor speed using PWM.• Line Tracking Robot.• Traffic lights control using PLC..Work Experience:• Sui northren gas pipelines limiled.Technical Skills:• PLC software• AutoCAD• Microsoft Office (Word, Excel, Power Point)• Optiwave• MultisimProfessional Activities/ Experience:• Member of EPS of U.E.T Taxila• Member of EFAR of U.E.T TaxilaHonors, Awards and Achievements:• Got SNPL scholarshipExtra Curricular Activities:• Lead the teams responsible for Organizing Farewell/Welcome Parties• Head of Dramatics in School• Member of debating society

MUBBASHAR MEHMOODHouse # MCB 9/1264 Mohallah Basti Allah Wali Chakwal, 48800, Punjab, PAKISTANPhone: (+92) 313 5489767, +92-543-544180, e-mail: mubbashar_85@hotmail.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To establish my self as an Engineer in a company with a motivating, competitive andlearning environment where my technical and managerial expertise can be put to use.Education:Session Degree/Certificate Institution CGPA/%AGE2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 2.912003-06 H.S.S.C. (Pre-Engineering) Fazaia Inter College Kallar Kahar, Chakwal 70.722001-03 S.S.C. (Science Group) Fauji Foundation Higher Secondary School No.1Chakwal76.70Final Year Project:Implementation of DCS (Distributed Control System) through Microcontroller.Class Projects:• Study of Control System of Pak-American Fertilizer Limited Mianwali.• Study of Electronic Fuel Injection System (EFI) of Toyota Cars.• Study of Surface Finishing Processes in Mechanical Manufacturing.• Design and Working of Auto-conveyor belt.• Design of Line Follower Robot using controller 8051.Work Experience:• 4 Weeks Internship in Pak-American Fertilizers Limited Mianwali (now AgritechFertilizers)• 8 Weeks Internship in D.G Khan Cement Company, Khairpur Plant, DistrictChakwal.• 4 Weeks Internship in HMC (Heavy Mechanical Complex) Taxila.Technical Skills:• CNC , PLC software• AutoCAD• Microsoft Office (Word, Excel, Power Point)• Keil, Proteus, MPLABProfessional Activities/ Experience:• Volunteered in establishing Embedded System Laboratory in the university.Honors, Awards and Achievements:• Remained the top student of school from 2000 to 2003.• Won District Chakwal Merit Scholarship in 2007.Extra Curricular Activities:• Lead the teams responsible for Organizing Farewell/Welcome Parties.• Leader of Final Year Project.• Head of Dramatics in School.

ZARYAB ALI MIRZAHose # 159,rahimabad airport road chaklala rawalpindi,pakistanPhone: (++92) 334 534 6412, e-mail:engrzaryab@gmail.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age2007-11 B.Sc. Electronics Engineering University of Engineering & Technology, Taxila. 3.26/42004-06 H.S.S.C. (Pre-Engineering) PCIT,Islamabad 68.452002-04 S.S.C. (Science Group) Sir Syed Public School Tipu Road, Rawalpindi 71.64Final Year Project:Design and Implementation of 32 bit MIPS Processor on FPGA.Class Projects:• Implementation of “UART Transmitter” on FPGA.• Design and Implementation of “8 bit Processor” on FPGA.• Design and implement “Line Following Robort”.• Making a “stop watch” on FPGA kit using ModelSim and Xilinx.• Designed “Automatic Cooling System” using Microcontroller 8051.• Designed “Door lock” using Microcontroller 8051.• Design and implement “Electronics Stethoscope”.• Regulated DC Power supply..Work Experience:• PTCL Exchange, Rawalpindi.Languages :• C++• Verilog HDL• Assembly• Matlab programmingTools:• Xilinx• Keil• Proteous• ModelSim• Matlab• OptiSystemExtra Curricular Activities:• Take 1 st position in singing competition.• Member of school cricket team.

MUHAMMAD FARHANHouse # MCB 9/1143 Mohalla Sargojra Gharbi St # 3B Chakwal, Punjab, PAKISTANPhone: (++92) 331 5791510, e-mail: muhammad_farhan96@yahoo.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age2007-011 B.Sc. Electronics Engineering University of Engineering & Technology, Taxila. 3.92cgpa2005-06 H.S.S.C. (Pre-Engineering) Govt. College Chakwal. 78.81%2003-04 S.S.C. (Science Group) Fauji Foundation School Chakwal. 75.88%Final Year Project:Design and Implementation of GSM Based Weather Station.Class Projects:• Developed a Line Follower Robot using Atmel 89c51 micro-controller.(Microprocessor).• Designed Electronic Stethoscope using OP Amplifiers.• Made various projects on FPGA.• Designed FM transmitter .• Implementation of wireless transmission on Electronic stethoscope.• PLC based Elevator.• Design and implementation of GSM based weather stationWork Experience:• PTCL• NTC.Technical Skills:• PLC software• AutoCAD• Circuit Maker and Electronic Workbench• Lab view• Matlab• Optiwave• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:• Member of Electronic forum for advanced research and studies UET Taxila.• Member of auditorial board of Campus magazine Almohandis.Honors, Awards and Achievements:• Listed five times on the Dean's Merit List.• Ranked on top in the 2007 session with cgpa of 3.92/4.• Got 1st position in Project competition on Wireless Electronic stethoscope• Participated in 2 nd all Pakistan Electronics OLYMPIAD held at GIKI.Extra Curricular Activities:• Head of Dramatics in School• Member of campus poetic society.

Muhammad Haris Zafar(Electronics Engineer)sS/O Mirza Zafar MehmoodCitizenship : Pakistani Date of Birth : 10 January 1989ContactCell : 0332 5353144E-mail : haris_mirza45@hotmail.comNear Al-Noor Mosque, Moh. Badar Din, Teh. Sarai Alamgir, Distt. Gujrat, Punjab, PAKISTANAddressObjectiveAvailabilityProfileSeeking a challenging career opportunity in a dynamic organization,which offers diverse job responsibility in Electronics engineeringand will fully utilize both my technical and managerial abilities andalso I can work in teamwork environment to achieve organizationalvision.Available for full time employment.2007 to 20112004 to 20062002 to 2004Bachelor in Electronics EngineeringUniversity of Engineering & Technology TaxilaF.Sc. in Pre-EngineeringF.G. Inter college, Jhelum Cantt, PakistanMatric in Science (Phys. Chem. Math & Bio)F.G Boys Public School Jhelum Cantt, PakistanEducation3.51CGPA69.63%71.29%ProjectsFinal Year ProjectPLC BASED FUEL CONTROL OF BURNER AND SPEED CONTROL OFROTARY KILN.(A cement industry process in which our goal is to control thefunctions with PLC Programming and also imminent of componentsused.)Class Projects Study, Design and Implementation of FM Radio Receiver Design of Water Level Indicator Design and implementation of Variable Power Supply Design Hardware and Control of Traffic Light Signals Using PLC PLC Programming

Key SkillsProficient or familiar with a number of tools, programming languages, concepts andtechnologies includingProgrammingLanguages MATLAB C++ Verilog HDL AssemblyEngineeringSoftware’sOthers WinPro Ladder CXONE V 1.1 Auto CAD 2004 Proteous (PCB Design) MS Office Photo Impact Software Management Experience in Organizing Events and Functions Teaching ExperienceProfessional Activities/ Experience Anchor (throughout Academic Carrier) Part of the team responsible for Organizing Welcome Party Vice Incharge in Dramatic Society Executive member in Sports Executive member in Environmental Protection Society Good Player of FootballExtra Curricular ActivitiesEnglish (proficient in speaking, reading &writing)Urdu (native)Languages

CURRICULUM VITAEJamal AbdullahEmail: jamal.rasheed47@gmail.com, decent_boy47@hotmail.comPostal Address: village @ P.O. Waulah Teh. Choa Saiden Shah Distt. Chakwal: +92-543421738 : +92-3445373528CAREER OBJECTIVETo seek a technical career position within an organization, where professionaleducation, & my personal abilities would be an advantage to the growth of theorganization and me, which would help me to learn and progress to achieve commonobjectives and enhance my potential for senior technical / management positioneventually.EDUCATIONSESSION (2007-2011)3.15 CGPABE (MECHATRONICS)UET TAXILASession (2004-2006)PassedFBISEF.S.c (Pre-Engg.)Session (2002-2004)PassedBISEMatriculationINDUSTRIAL EXPERIENCE♦♦♦♦♦♦4 Weeks Internship with Bestway Cement Ltd.(Chakwal), Pakistan4 Weeks Internship with D.G Khan Cement Ltd.(Chakwal), Pakistan6 Weeks Internship with ICI Khewra, PakistanIndustrial tour at Master Tiles Gujranwala, PakistanIndustrial tour at POL (Pakistan Oil Field) Pendori, PakistanStudy project at ICI Ltd. Khewra, PakistanCERTIFICATE AND TRANNING♦ 2 nd prize in Project Exhibition held by EFARS at UET Taxila in 2008.♦ 2 nd prize in Project Exhibition held by EFARS at UET Taxila in 2010.AREA OF INTEREST♦♦♦InstrumentationElectromechanical controlProgramming

MAJOR SUBJECTS♦ Engineering Management♦ Engineering Mechanics( Static, Dynamic)♦ Engineering drawing♦ Mechanics of Material♦ Theory of Machine♦ Machine Design♦ Machine Tools♦ Workshop Technology♦ Mechatronics System Design♦ Special Topics In Mechatronics (image processing, neuralnetworks)♦ Industrial Control & Manufacturing Systems (PLC)♦ Instrumentation & Feedback Control Systems♦ Hydraulics & Pnemautic Systems♦ Electronics Devices♦ Microcontroller Interfacing & Programming (8051, using C-language)PROJECTSSKILLS♦ Automation of water purification plant using PLC(Programmablelogic controller)(Final Year project)♦ Design & Actuation Of Two-finger Mechanical Gripper♦ Automatic Car Barrier♦♦♦♦MATLABProteusPLC Programming Software’s (PSIM, CX Programmer)MS Word, MS Excel, MS Power pointPERSONAL PROFILELANGUAGESHOBBIES♦♦♦♦♦♦♦♦♦♦♦Energetic and willing to take challenges and meet Challenges.A good team member, ability to lead, regarding meetingdeadlines.Try to build on the basic concept and go for an innovation if thesituation demands.Willing to implement my knowledge to the best interest of yourorganization.Spread my knowledge to others as I can.UrduEnglishPunjabiComputerInternetReading Books

Khawar JavedCell No # 0334-8763680Add: P/O Waulah Tehsil Choa Shaidin ShahDistt ChakwalE-mail: Khawar_jav@hotmail.comObjectivesTo be given a chance to exhibit my skills as a Mechatronics Engineer and use my knowledge asa positive influence with reputable company.Willing to implement my knowledge to the best interest to the organization.willing to take challenges and meet Challenges.Try to build on the basic concept and go for an innovation if the situation demands.A good team member, ability to lead, regarding meeting deadlines.Education2007-2011 | BSc Mechatronics Engineering (CGPA up to 7 th Semester =3.35)University Of Engineering & Technology Taxila Sub Campus Chakwal2005 | FSc Pre Engineering (1 st division ) (66.09%)Fazaia Inter College Kallar Kahar2003 | S.S.C Science Group (1 st division ) (69.05%)Board Of Intermediate And Secondary Education RawalpindiFinal Year | ProjectDistributed Control System (DCS)Selection of controllers and there programmingDesign of communication systemDesign of HMI (Human Machine Interface) for the whole systemAchievements3 rd year | Class ProjectSelf Controlled Automatic Guided VehicleAn automatic vehicle that can sense load or object placed on it, and can automaticallydeliver that part in different industrial zones by following a track.Mechanical design of the vehicleSelection and design of sensors and actuatorsPCB design2 nd year | Class ProjectAutomatic conveyer belt for material handlingAutomatic conveyer belt that starts only when the part is present on the belt and conveythat part from one end to another.Design of mechanical structure of the conveyerDesign of sensors and actuators

Training8 Weeks | InternshipAt D.G.Khan Cement Company Limited (Khairpur Project) PakistanInstrumentation workshop activitiesStudy of control system and PLCSkills• Software Proficiency:• MATLAB • KEIL 8.0 (C compiler for embedded systems)• Labview (National Instruments) • Logixpro500 (Ladder Logic Programmer)• Proteus (Electronic Simulator) • Micro C (C compiler for embedded systems)• CNC Simulator • MP LAB (Assembly compiler for embeddedsystems)• PSIM (PLC Simulator) • Electronic work bench• VisObjNet20a (Petri Net Simulator)• Programming skills:C\C++ , Mat lab , Assembly language ,PLC Ladder Logic Programming• Languages:Punjabi , Urdu , English

MUNIB AFZALChak # 261 / p ,tehsil Sadiqabad distt. Rahim yar khan,, Punjab, PAKISTANPhone: (++92) 300 8772881 e-mail: engr.munib@yahoo.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 3.22C.GPA2005-06 H.S.S.C. (Pre-Engineering) MTB higher secvondary school sadiqabad 76.362002-04 S.S.C. (Science Group) Shama public school bangla manthar 75.52Final Year Project:Optimization of low cost CNC .Class Projects:• Design of fire fighting robot• Control motor speed and direction• Make a Keypad in PIC controller.• Line Tracking Robot.• CNC programming, PLC, Petri net modeling.Work Experience:• Fatima fertilizer company limited .Technical Skills:• CNC , PLC software• AutoCAD, matlab• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:• Volunteered in establishing Engineering embaded system Laboratory in theuniversity• Teaching Experience in City School (six months)Honors, Awards and Achievements:• Best story writer award for university magazine• Best sports man of year• Remained the top student of school from 2001 to 2003Extra Curricular Activities:• Lead the teams responsible for Organizing Farewell/Welcome Parties• Head of Dramatics in School• Member of debating society

HUSNAIN MURADVillage Jajjay p/o Kulluwal The.Sambrial Dist. Sialkot Punjab, PAKISTANPhone: (++92) 333-8719396, E-mail: husnainghumman@yahoo.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To be a successful member of corporate team in dynamic organizationwhere my expertise in any field where I contribute essentially in achieving organizationaims is being utilized.Education:Session Degree/Certificate Institution Result2007-10 B.Sc. ElectronicsUniversity of Engineering & Technology, 3.31EngineeringTaxila.2003-05 H.S.S.C. (Pre-Engineering) Govt.Jinnah Islamia College Sialkot 8122001-03 S.S.C. (Science Group) Govt.H/S Kulluwal Sialkot 612Final Year Project:WCDMA based transmitter and Rake receiver using Matlab 7.09 andSimulink for simulation and implementing FPGA based hardware.Class Projects:• Study the interfacing of LCD with PIC microcontroller.• Study and hardware Implementation of digital to analogconverter• Hardware implementation of Field strength meter.• Traffic control system using P.L.C controller.• Detail study of CDMA technologies +mobile communication.Work Experience:Worked at ATC Department, Sialkot International Airport for 3 months.Technical Skills:• Cisco Packet Tracer• Matlab 7.09.• Microsoft Office (Word, Excel, Power Point)• Optisystem• Electronic WorkbenchExtra Curricular Activities/ Experience:• Member of Engineers Forum For Advance Research.• Member of Environment Protection Society.• Member of Dramatic Society.• Member of Blood Donation Society.Honors, Awards and Achievements:• Awarded a certificate by ITALIAN company during installation atSialkot international airport• Cisco Certified Networking Authentication(4 months) from TNAIslamabad, Master in configuring all types of switches and routers )Reference:May produce if organization demanded.

MUHAMMAD WASEEMMECHATRONICS ENGINEERStreet # 22 ward # 5 Kabirwala.District Khanewal.waseem.mct@gmail.com+92 0346 5737870, 065 2014321NIC No: 36102-9823303-5Date of birth: 07-02-1987OBJECTIVE:To be the part of a challenging professional environment where I can effectively utilize andenhance my innate capabilities and can enhance my theoretical knowledge throughpractical experience.EDUCATION:Session Degree/Certificate Institution %age2005-09 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 72.672002-05 H.S.S.C. (Pre-Engineering) Govt. College Kabirwala. 73.362000-02 S.S.C. (Science Group) Govt. High School, Kabirwala. 82.58• Industrial Automation and Robotics• Mechatronics and System Dynamics• Feedback Control Systems• Mechatronics Instrumentation• Electrical Machines and Drives• Micro Controllers and Processors• Programming C++MAJOR SUBJECTS:FINAL YEAR PROJECT:Optimization of EFI Engine in Motor Bikes:With the aim of fuel Optimization (meter and measure the air and fuelflow into the engine cylinders)Objective:• To study flow velocity and mass flow rate distribution throughdifferent runners at unsteady conditions.• Compare the Engine Analyzer Pro data with experimental data.• Compare the Fuel Injector Calculator data with experimentaldata.• To suggest for performance improvement based on the analysisresults.

Methodology:• Study and compare the principles of both Carburetor and EFI engines.• Study and compare the hardware of both Carburetor and EFI engines.(Study of different Sensors necessary to convert Carburetor into EFI kit.)• Collection of the data of Atlas Honda CG 125 and put thespecification in software.• Calculate the performance measure of motor cycle and put thedata in software for modeling and graphing.• Obtaining results using the solvers Engine Analyzer Pro ,Fuel Injector Calculator• Compare the both software data and comments aboutdifference.• CNC Programming, PLC(logics pro), Petri Net Modeling.• Automatic Opening and Closing of Door.• Control Motor Speed Using PWM.• Make a Keypad In PIC Controller.• Line Tracking Robot.CLASS PROJECTS:WORK EXPERIENCE:Two Month Internship in Nestle Pakistan Ltd Kabirwala Factory.(From 28 Aug 2008 to 28 Oct 2008)During this period,• I gain a sound knowledge about variety of Instruments such as Temperature,Pressure, Flow and Level measuring Sensors and Switches.• Learn to Calibrate these Instruments.• Final Report and Suggestions to improve the performance of theseInstruments.• Industrial Robotics and Factory Automation using PLC’s.• Keenly interested in SCADA and DCS in “PROCESS INDUSTRIES”• Shall be furnished on demandAREAS of INTEREST:REFERENCE:

Shoukat HussainMouza Rang Ali post office Lar,Tehsil and District Multan, Punjab, PakistanPhone: (++92) 345-7353116, e-mail: engrshokut@gmail.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age/CGPA2007-11 B.Sc. Electronics Engineering University of Engineering & Technology, Taxila. 3.38/42004-06 H.S.S.C. (Pre-Engineering) Govt. college Bosan road Multan 76.62002-04 S.S.C. (Science Group) Govt. Higher secondary school Lar, Multam 75.8Final Year Project:Distributed control system (DCS).Class Projects:Traffic Light Control System using PLCWork Experience:Six weeks internship at National Telecommunication Corporation (NTC) Lahore1. Orientation in Data Networks NTC Lahore2. Orientation in Switching NTC LahoreTechnical Skills:5. During 4 years university programme designing and presenting the presentations ondifferent technical, communication topics by using MS Office & Microsoft Applications.6. Doing a work on Matlab application like digital filter designing in digital signalprocessing, digital image processing course, signals and system and control system andetc7. Have some course work on Optisystem software in optoelectronics subject.8. Different type of programmes designing on c++Professional Activities/ Experience:I have been member of school debating society.Extra Curricular Activities:• Lead the teams responsible for Organizing Farewell/Welcome Parties• Captain of the school cricket team.

Sultan Fateh Ali KhanKhumani Chowk, Tatral Road,Moh. Kot Ganish,Chakwal, Punjab, PAKISTANPhone: (++92) 345 577 3877, e-mail: sultanfateh_alihan@yahoo.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age/C.G.P.A2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 2.792004-06 H.S.S.C. (Pre-Engineering) K.K. ScienceH\S School, Kallar Kahar, Chakwal 71.362002-04 S.S.C. (Science Group) Govt. High School No. 1 Chakwal 70.35Final Year Project:Design and Implementation of Distributed Control System.Class Projects:• Study the working of Electronic Power Stearing.• Design of Auto-Start Conveyor for material transportation.• Control motor speed using PWM.• Serial Communication in PIC controller.• Line Tracking Load Carrying Robot.• CNC programming, PLC, Petri net modeling.Work Experience:• Internship at D.G. Khan Cement Factory Khairpur , Chakwal.Technical Skills:• CNC , PLC softwares• AutoCAD• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:• Volunteered in establishing Embaedded Systems Laboratory in the university• Quaid.e.Azam Scout.Extra Curricular Activities:• Player of Cricket, Football, Table Tennis at School, College and Universitylevels

WAQAS ASHRAFH# 269 E-Block Tajpura Scheme, Lahore, Punjab, PAKISTANPhone: (++92) 0333 4657860, e-mail: engrwaqas07@gmail.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To pursue a career in an excelling organization to groom my technical, management andinterpersonal abilities and render all possible services in my capacity to the firm.Education:Session Degree/Certificate Institution %age2005-09 B.Sc Electronics Engineering University of Engineering & Technology, Taxila. 2.852003-05 H.S.S.C. (Pre-Engineering) Govt. Islamia college Railway Road, Lahore 1Division2001-03 S.S.C. (Science Group) Minhaj-ul-Quran model School, Lahore 1DivisionFinal Year Project:Industrial automation using programmable logic controller (PLC).Class Projects:• Traffic control signalsINTERNSHIP Experience:• Pak-American Fertilizer, Iskandarabad• Packages Limited, Lahore• Gain Electrical & Control systemsTechnical Skills:• PLC simulator software, electronics workbench• Microsoft Office (Word, Excel, Power Point, Visio), Photoshop, Paint ShopPro.Professional Activities/ Experience:During my stay at GAIN Electrical & Control Systems, I have participated in• OHSAS (Occupational Health & safety)Two Days workshop by Pakistan Engineering Council (PEC)• ISO 9001:2000 (Quality management systems)• ISO 14000 (Environmental management systems)• ISO 17025 (Laboratory management systems)Honors, Awards and Achievements:• Voluntarily organized Blood donation camp organizing at campus• Creative member in University Dramatic society• Exective member EFARSExtra Curricular Activities:• Participated in inter university competitions• Organizers in university Farewell/Welcome Parties• Member of Dramatics & Poetic society in university

Abdul RahmanHose # 5 St. # 1 Javed Town Okara, Punjab, PAKISTANPhone: (++92) 321 5465253, e-mail: arahman736@yahoo.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To contribute towards the growth of a prestigious organization in the fields of Quality,Environment, Economy, Health, Safety & Security with help of engineering knowledgethat I have attained during my academics.Education:Session Degree/Certificate Institution %age/C.G.P.A2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 3.78 c.g.p.a2004-06 H.S.S.C. (Pre-Engineering) D.P.S & C Okara 73%2002-04 S.S.C. (Science Group) Govt. High School 18 G/D Okara 78%Final Year Project:Automation of Tanning Process via PLC & Wireless Control RoomClass Projects:• PCB implementation with DC power supply• Light Seeking Robot (LDR & Relay implementation)• Automatic car washing workshop (Microcontroller based workshop)• Industrial Study Project at Packages Lahore• CNC programming, PLC, Petri net modeling.Work Experience:• 6 weeks internship in Atlas Honda Ltd Lahore• 4 weeks internship in PakArab Fertilizer MultanTechnical Skills:• CNC , PLC , Matlab , Cam Spectra ,Micro C, Ares Software• AutoCAD• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:• Volunteered in establishing Robotics & Automation Laboratory in the university• Member of Team for PEC visitHonors, Awards and Achievements:• Position Holder Scholarships (University) Two 1 st Positions (5 th & 6 th Semester) Three 2 nd Positions (3 rd ,4 th ,7 th Semester)• University Quiz Competition WinnerExtra Curricular Activities:• Surfing Web & Interacting People

• Registration Committee In charge of EFARS Society in University• Ex CR of class

WAQAR SHABBIRMCB-6/1087 MOH MINHAS ABAD STREET NO. 2 NEAR SARPAK CHAKWALEmail: mechatron_mt@yahoo.com , Phone :+92-333-5906451- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:I’m looking to enhance and implement my professional, managerial and technical skillsto excel in the creative, innovative and challenging environment.Education:Session Degree/Certificate Institution %age2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 3.08 CGPA2004-06 H.S.S.C. (Pre-Engineering) Fazaia inter college Kallar Kahar Chakwal. 64.912002-04 S.S.C. (Science Group) Fazaia inter college Kallar Kahar Chakwal. 71.65Final Year Project:RENEWABLE ENERGY(Vertical axis wind turbine)Class Projects:• Security alarm system• Line following robot• Control motor speed using PWM.• Controller based robotic arm.• CNC programming, PLC, Petri net modeling.• Process industry (Spinning mill) study project• Project ManagementWork Experience:• PAC Kamra• Toyota Azad Motors Mirpur Azad KashmirTechnical Skills:• CNC , PLC software, Auto cad, Mat lab ,C++• Pspice, Keil, EWB, Proteus, Livewire• Microsoft Office (Word, Excel, Power PointHonors, Awards and Achievements:• President of Chakwal engineering Students Federation• President Engineers Hiking Club.• Executive member Blood Donation Society.• Executive member Dramatic and cultural societyPersonal InterestsCricket |Badminton | Bridge, chess | International current affairs•

MUHAMMAD FAISALAwan Kot, Near Charagh Masjid, Mohallah Alamabad,Behal Road,Bhakkar. - 30000, Punjab, PAKISTANPhone: (++92) 333 940 8796, e-mail: xs2faisal@live.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To work in organizations under professionals & to cooperate with them in order to groomself abilities & capabilities, to ensure perfection in all kinds of conditions for futureopportunities.Education:Session Degree/Certificate Institution %age2007-11 B.Sc. MechatronicsUniversity of Engineering & Technology, Taxila. -------Engineering* (8 th Semester)2004-06 H.S.S.C. (Pre-Engineering) Government College For Boys Bhakkar 69.9%2001-03 S.S.C. (Science Group) District Public School Bhakkar 83%Final Year Project:Development of Automobiles as a Mechatronic System (Hybrid Cars).Class Projects:• Object Counter using Microcontroller (8951C).• Automated Object Security System.• DC power Supply.• PCB Designing.• Study Of UCAV (Unmanned Combat Air Vehicle).Internships:• Descon Engineering Limited , Lahore.• D.G.Khan Cement Kallar Kahar.Technical Skills:• PSIM, Cnc Simulator, Petri-Net Modeling• Primavera Project Planner (P3 & P6).• Matlab, AutoCAD.• Microsoft Office (Word, Excel, Power Point).Professional Activities/ Experience:• Volunteered in establishing Embedded System Laboratory & RoboticsLaboratory in the university• Teaching Experience in City School (One Year)Honors, Awards and Achievements:• Best Student in English Grammar in Matric.• Ist prize in District Science Competition in HSSC.• Remained the top student of school from 2001 to 2003Extra Curricular Activities:• Vice Incharge Sports in University.• Advisor Sports University.• Vice Captain University Football Team (2 years Champion)• Captain Volley Ball Team (2 Years Champion)• Member Debating society & Poetic Society

Muhammad Imran KhanVillage Dhoke Gujjar p.o box Ara the Choa Saidan Shah dist Chakwal, Punjab, PAKISTANPhone: (++92) 321 522 7275, e-mail: chaudharyimrankhan@gmail.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age/GPA2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 2.91 CGPA2004-06 H.S.S.C. (Pre-Engineering) F.G. Sir Syed College The Mall Rawalpindi Cantt. 68.912002-04 S.S.C. (Science Group) Govt High School Ara Chakwal. 80.35Final Year Project:Renewal energy system (Wind Turbine).Class Projects:• Study the construction and working of Gyroscope.• Motors Interfacing.• Controller base Robotic Arm.• Line Following Robot.• CNC programming, PLC, Petri net modeling.Work Experience:• ICI Soda Ash, Jhelum.• Fauji fertilizer company,Goth machhi.• DG Cement Limited,Chakwal.• Bestway Cement Limited,Chakwal.Technical Skills:• CNC , PLC software• AutoCAD• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:Honors, Awards and Achievements:• Remained the top student of school from 2002 to 2004.• Best semester project in the class.Extra Curricular Activities:• Executive member of Engineering Hiking Club.

S M HUSSAIN KIRMANI518 Nargis block Allama Iqbal town LahorePhone: (++92) 3224564326, e-mail: syed_kirmani7@yahoo.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age2006-10 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 3.30CGPA2003-06 H.S.S.C. (Pre-Engineering) Aitchison College Lahore. 75%2001-03 S.S.C. (Science Group) Aitchison College Lahore. 77.05%Final Year Project:INTELLIGENT LIVING ROOM.Class Projects:• Automatic light control.• James bond gadgets car project.• CNC programming, PLC, Petri net modeling.• Study project of cruise missiles.• Study project of engine assembly plantWork Experience:• Millat tractors limited LahoreTechnical Skills:• CNC , PLC software• AutoCAD• Matlab• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:• Volunteered in Blood donation camp.Honors, Awards and Achievements:• 1 st position in class 8Extra Curricular Activities:• Member of cricket Team.

MALIK OMER TAHIRMolladad Coloney Civil Line near rest house Jail Road Gujrat PakistanPhone: (++92) 3137882925, e-mail: tahiromer47@yahoo.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age2006-10 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 3.28CGPA2003-06 H.S.S.C. (Pre-Engineering) Govt.Zamindara Degree College Gujrat. 74%2001-03 S.S.C. (Science Group) Municipal Model High School for boys Gujrat 84%Final Year Project:Automatic Sorting Transportation And Storage.Class Projects:.• Auto Guided Vehicle (AGV).• Box Sorting Robot• Water Level Sensing• CNC programming, PLC, Petri net modeling.Work Experience:• Service Industries Gujrat• Master Tiles GujranwalaTechnical Skills:• CNC , PLC software• AutoCAD• Matlab• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:• Lead the teams responsible for Sports Committee of University.• Participated in Dramas, Skits in UniversityHonors, Awards and Achievements:• 2nd Position Holder in 6 th Semester in University.• Awarded 2 nd position in project competition in UET Taxila.Extra Curricular Activities:• Captain of University Football Team.• Member of Dramatic society

AAMER MEHMOODMohallah Faridia post office Gogran District Lodhran Punjab, PAKISTANPhone: (++92) 3464934559, e-mail: amerbhattimct@hotmail.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 3.08 CGPA2003-06 H.S.S.C. (Pre-Engineering) Sadiq Egerton College Bahawalpur 69.092001-03 S.S.C. (Science Group) Govt. High School, Gogran (Lodhran) 76.50Final Year Project:Design And Implementation of Automatic Bottle Filling Plant Controlling throughSCADA SystemClass Projects:• Design and Implementation of Automatic Door Opening And closing.• Automatic Water Level Detection..• Line Tracking Robot.• CNC programming, PLC, Petri net modeling.Work Experience:• Engro Fertilizers Company DaharkiTechnical Skills:• CNC , PLC software• AutoCAD• Microsoft Office (Word, Excel, Power Point)• Matlab• ProtiousProfessional Activities/ Experience:• Volunteered in establishing Engineering Mechanics Laboratory in the university• Member of Environmental Protection Society(EPS) in the universityHonors, Awards and Achievements:• Awarded 3 rd position in projects competition at UET• Awarded 2 nd position in debating competition at UETCurricular Activities:• Lead the teams responsible for Organizing Farewell/Welcome Parties• Head of Dramatics in School• Member of debating society

SAJJAD ALIChak#455/E.B Tehsil Burewala District Vehari - 61010, Punjab, PAKISTANPhone: (++92) 3347197964, e-mail: sajjad.mct12@hotmail.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age2005-09 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 3.32CGPA2003-05 H.S.S.C. (Pre-Engineering) Govt.Degree College Burewala. 71.722001-03 S.S.C. (Science Group) Chak#455/E.B Burewala (Vehari). 74.47Final Year Project:Design and Implementation Of Automatic Bottle Filling Plant With SCADA.Class Projects:• Study the construction and working of Boiler.• Automatic Door Opening And Closing.• Auto Guidid Vehicle (AGV).• Control motor speed using PWM.• Line Tracking Robot.• CNC programming, PLC, Petri net modeling.Work Experience:• Pakistan Aeronetical Complex (PAC) KAMRA.Technical Skills:• CNC , PLC software• AutoCAD• Matlab• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:• Volunteered in establishing Engineering Mechanics Laboratory in the university• Lead the teams responsible for Sports Committee Of University.Honors, Awards and Achievements:• 3 rd Position Holder in 7 th Semester in University.• Awarded 3 rd position in project competition in UET Taxila.• Remained the top student of school from 2001 to 2003Extra Curricular Activities:• Lead the teams responsible for Sports Committee Of University.• Captain of University Football Team.• Member of Dramatic society

Saeed AkhtarNear Hafiz General Store,27 Area, New Gudwal ,Wah Cantt –Punjab, PAKISTANPhone: (++92) 333 5940928, e-mail: hmdakhtar@gmail.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age2005-09 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 94.002003-05 H.S.S.C. (Pre-Engineering) MRF Degree College, Kamra 68.042001-03 S.S.C. (Science Group) PAF Degree College Rafiqui, Shorkot Cantt 78.05Final Year Project:Design and Implementation of Surveillance Mission Robot using Motion PlanningTechniques.Class Projects:• Design of Automated Guided Vehicle (AGV).• Design of Fire Alarm using Logic gates.• Control motor speed using PWM.• LCD interfacing using 89C51 Micro-controller.• Line Tracking Robot.• CNC programming, PLC, Petri net modeling.Technical Skills:• CNC , PLC software• AutoCAD• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:• Internship at Heavy Mechanical Complex-3, Taxila• Internship at Oil & Gas Training Institute (OGTI), Islamabad• Internship at Capital Engineering & Services, IslamabadHonors, Awards and Achievements:• 1 st Prize in Project Exhibition in University.• Merit Scholarship Holder During EngineeringExtra Curricular Activities:• PC Games• Cricket• Hockey

Muhammad Nauman HabibHose #E-88,Street no.5, Mohalla Chaudhry Hayat Baksh, Near Alam Khan Road, Rawalpindi – 46000,Punjab,PAKISTANPhone: (++92) 331 504 9661, e-mail: noomi147@hotmail.com- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Objective:To serve in an organization that can help me nurture my professional skills by providingme enabling and challenging environment, where I can contribute by applying myknowledge.Education:Session Degree/Certificate Institution %age2005-09 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 78.752003-05 H.S.S.C. (Pre-Engineering) F.G. Degree Quaid-e-Azam College, Chaklala 72.09Scheme3, Rawalpindi Cantt.2001-03 S.S.C. (Science Group) Capital Public School, Rawalpindi 77.52Final Year Project:Design and Implementation of Surveillance Mission Robot using Motion PlanningTechniques.Class Projects:• Design of Automated Guided Vehicle (AGV).• Design of Fire Alarm using Logic gates.• Control motor speed using PWM.• LCD interfacing using 89C51 Micro-controller.• Line Tracking Robot.• CNC programming, PLC, Petri net modeling.Technical Skills:• CNC , PLC software• AutoCAD• Microsoft Office (Word, Excel, Power Point)Professional Activities/ Experience:• Internship at Heavy Mechanical Complex-3, Taxila• Internship at Oil & Gas Training Institute (OGTI), Islamabad• Internship at Capital Engineering & Services, IslamabadHonors, Awards and Achievements:• 1 st Prize in Project Exhibition in University.• Benolvent Fund Scholarship during 3 rd year of EngineeringExtra Curricular Activities:• PC Games• Cricket• Hockey