Chapter 23 - Zodiac

WindshieldsWindshields & Frame Accessories23SWITCHBLADE QUICK RELEASE 2-UP WINDSHIELDSSwitchBlade Quick Release windshields are made from the finestwindshield material in the world, 4.0 mm thick Lexan polycarbonate.This material is 20 times more impact resistant than acrylic or otherplastic windshields.Additionally this polycarbonate features NationalCycle's exclusive Quantum coating. This provides 10 times betterscratch resistance than any other windshield material on the market.Edges of the screen are radiused for safety and enhanced appearance.These screens provide good wind-and-weather protection for bothrider and passenger which makes them great for short and long trips.Last but not least, the SwitchBlade 2-Up windscreen is fitted to yourbike with smooth looking chrome plated and stainless steel hardware.Just bolt the hardware to your front end as indicated on the includedinstallation instructions, and then hook the screen onto the brackets.The screen is key lock secured to the brackets. After your trip you canjust unlock and than hook-off the screen and leave the hardware inplace. On and off in less then 5 seconds.We have indicated the Heightof these screens measured from the top of the headlamp cut out to thetop of the screen. For your convenience we list part numbers forcomplete windscreens with mounting hardware kit,as well as individualscreens and mounting kits.Complete windscreen with mounting bracket kit730962 Fits 39 mm Narrow Glide front fork equipped 1988 topresent XL Sportster, 1993 thru 2005 Dyna, 1988 thru1994 FXLR Low Rider, and 1988 thru 1994 FXR. Height18 1/2" (47 cm),Width 23" (58.4 cm)23-006

WindshieldsComplete windscreen with mounting bracket kit730963 Fits 41 mm front fork equipped 2006 thru 2008 FXDWGDyna Wide Glide. Height 19" (48.2 cm),Width 22.6"(57.4 cm)730964 Fits all 41 mm front fork equipped 1984 to present FXSTSoftail models, 1980 thru 1985 FXWG Wide Glide, 1983FXDG Disc Glide and 1993 thru 2005 FXDWG Dyna WideGlide. Height 19 1/2" (49.5 cm),Width 23" (58.4 cm)Complete windscreen with mounting bracket kit730965 Fits all 41 mm front fork equipped 1986 to present FLSTSoftail models, except those with H-D Spotlight bar.Height 19 1/2" (49.5 cm),Width 23" (58.4 cm)730966 Fits all 41 mm front fork equipped H-D Spotlight barequipped 1986 to present FLST Softail models, except2005 to present FLSTN. Height 19 1/2" (49.5 cm),Width23" (58.4 cm)Complete windscreen with mounting bracket kit730967 Fits all 1994 to present FLHR, FLHRC and FLHRS TouringmodelsComplete windscreen with mounting bracket kit730961 Fits 49 mm front fork equipped Dyna Glide models 2006to presentIndividual Clear SwitchBlade 2-up windscreens731095 For 39 mm Narrow Glide front fork equipped 1988 topresent XL Sportster, 1993 thru 2005 Dyna, 1988 thru1994 FXLR Low Rider, and 1988 thru 1994 FXR731100 For 41 mm front fork equipped 2006 thru 2008 FXDWGDyna Wide Glide731096 For all 1984 to present FXST Softail models, 1980 thru1985 FXWG Wide Glide, 1983 FXDG Disc Glide and1993 thru 2005 FXDWG Dyna Wide Glide731097 For all 1986 to present FLST Softail models731098 For all 1994 to present FLHR, FLHRC and FLHRS Touringmodels731099 For 49 mm front fork equipped Dyna Glide models 2006to presentIndividual SwitchBlade mounting bracket kits731101 Fits 39 mm Narrow Glide front fork equipped 1988 topresent XL Sportster, 1993 thru 2005 Dyna, 1988 thru1994 FXLR Low Rider, and 1988 thru 1994 FXR731102 Fits all 1984 to present FXST Softail models, 1980 thru1985 FXWG Wide Glide, 1983 FXDG Disc Glide and1993 thru 2005 FXDWG Dyna Wide Glide731103 Fits all 2006 to present Dyna Glide and 2006 thru 2008FXDWG Dyna Wide Glide731104 Fits all 1986 to present FLST Softail models, except thosewith H-D Spotlight bar731105 Fits all H-D Spotlight bar equipped 1986 to present FLSTSoftail models731106 Fits all 1994 to present FLHR, FLHRC and FLHRS TouringmodelsWindshields & Frame Accessories2323-007

WindshieldsWindshields & Frame Accessories23NATIONAL CYCLE'S BEADED HEAVY DUTYWINDSHIELDThe Beaded Heavy Duty is an authentic three-piece beadedconstruction.This timeless classic is available with a clear top and yourchoice of clear, blue or black lower section and adjusting window.Theclassic beaded edge is applied in a modern way without glue to reduceyellowing and remain good looking for many years.The Beaded HeavyDuty uses FMR hardcoated Lexan polycarbonate and is 21 1/4" (54 cm)high and 22 1/2" (57 cm) wide. Windshields feature highly polishedchrome steel outer hardware with non-glare black epoxy coated steelinner straps.Complete windshield kits come with the required mountinghardware. When you also want to create some convenient up-frontstorage we have a Holdster windshield bag available as an accessory.Fits 1993 thru 2005 FXDWG, 1980 thru 1985 FXWG,1983 FXDG and all FXST Softail models (exceptSpringer) 1984 to present730902 Complete windshield kit, clear730903 Complete windshield kit, clear with blue lowers730904 Complete windshield kit, clear with black lowers710680 Mounting bracket kit onlyFits FXSTS Springer models 1987 to present731109 Complete windshield kit, clearFits FLST Heritage Softail 1986 thru 1990 and 2006,FLSTC Heritage Softail Classic 1987 to present,FLSTN Nostalgia & Special 1993 thru 1996, FLSTF FatBoy 1990 to present and FLSTFB Fat Boy Lo 2010 topresent without stock or aftermarket (spot) lightbar fitted. FLST, FLSTC and FLSTN models that havethe (spot)light bar can be equipped with thewindscreen ZPN 710675, 710677 or 710678 on thestock mounts730922 Complete windshield kit, clear730923 Complete windshield kit, clear with blue lowers730924 Complete windshield kit, clear with black lowers710679 Mounting bracket kit onlyFits 1949 thru 1959 FL730912 Complete windshield kit, clear730913 Complete windshield kit, clear with blue lowers730914 Complete windshield kit, clear with black lowers710681 Mounting bracket kit onlyReplacement windshields & windows710675 Windshield, all clear710677 Windshield, clear with blue lowers710678 Windshield, clear with black lowers710669 Top clear windshield only710683 Lower clear windshield only710670 Clear adjusting window710671 Light grey tinted adjusting window710673 Blue adjusting window only710686 Lower black window only710674 Black adjusting window onlyAccessories710696 Triple Holdster storage bag23-008

Windshields730920 Fits FLST Heritage Softail 1986 thru 1990 and 2006,FLSTC Heritage Softail Classic 1987 to present, FLSTNNostalgia & Special 1993 thru 1996, FLSTF Fat Boy 1990to present and FLSTFB Fat Boy Lo 2010 to presentwithout stock or aftermarket (spot) light bar fitted. FLST,FLSTC and FLSTN models that have the (spot)light barcan be equipped with the windscreen ZPN 710711 onthe stock mounts730910 Fits 1949 thru 1959 FL730915 Fits 1960 thru 1984 FL730915 Fits 1977 thru 1993 FLHS when installed in combinationwith stock windshield frame bracketsOptional and replacement adjusting windows710690 Clear adjusting window710691 Light grey tinted adjusting window710692 Red adjusting window710693 Blue adjusting window710694 Black adjusting windowNATIONAL CYCLE'S TOURING HEAVY DUTYWINDSHIELDSA large and very popular windshield is the Heavy Duty, a shield offersexcellent wind protection. The shield is made out of 4 mm thickQuantum coated Lexan Polycarbonate, the highest quality motorcyclewindscreen material available. It is vastly superior to any other hardcoatapplication and is virtually indestructible, reason why it is coveredby National Cycle's 3-year Unbreakable Warranty! The Touring HeavyDuty screen is DOT & ABE approved, is 20" to 21 1/2" (50.8 cm to54.6 cm) high and 21 1/2" (54.6cm) wide The lower section with thecut-out for your headlight is called the adjusting window. To adjustyour Touring Heavy Duty windshield to your personal wishes these areavailable separately in various colors.To create storage space you mayconsider to fit the Triple Holdster windshield bag.For the finishing touchof your Touring Heavy Duty windshield we have a chrome plated billetaluminum trim kit available.Individual mounting kits710679 Fits FLST Heritage Softail 1986 thru 1990 and 2006,FLSTC Heritage Softail Classic 1987 to present, FLSTNNostalgia & Special 1993 thru 1996, FLSTF Fat Boy 1990to present and FLSTFB Fat Boy Lo 2010 to presentwithout stock or aftermarket (spot) light bar fitted. FLST,FLSTC and FLSTN models that have the (spot)light barcan be equipped with the windscreen ZPN 710711 onthe stock mounts710680 Fits 1993 thru 2005 FXDWG, 1980 thru 1985 FXWG,1983 FXDG and all FXST Softail models (exceptSpringer) 1984 to present710681 For 1949 thru 1984 FL, also for 1977 thru 1993 FLHSwhen installed in combination with stock windshieldframe bracketsWindshield only710711 For all above mentioned windshield kits, except on 1977thru 1993 FLHS710718 For windshield kits for 1977 thru 1993 FLHSWindshields & Frame Accessories23Accessories710698 Billet aluminum trim kit710696 Triple Holdster storage bagComplete Touring Heavy Duty windshield kitsincluding mounting kits730900 Fits 1993 thru 2005 FXDWG, 1980 thru 1985 FXWG,1983 FXDG and all FXST Softail models (exceptSpringer) 1984 to present23-009

WindshieldsWindshields & Frame Accessories23NATIONAL CYCLE CHOPPED HEAVY-DUTYWINDSHIELDThe Chopped Heavy Duty has a wide screen and low profile to make itthe preferred choice of many riders.This windshield provides excellentprotection for the chest and shoulders. Shields feature National Cycle'sstate-of-the-art Quantum coating on Lexan polycarbonate material.Windshield frames feature highly polished chrome steel outer hardwarewith non-glare black epoxy coated steel inner straps. Windshield is21.5" (54.6 cm) wide and adjustable in height from 14.3" thru 15.8"(36 thru 40 cm), measured from the top of the headlight cut-out to thetop of the screen.The center lower window with the headlight cut-outis also adjustable, so after adjusting your screen to match your lengthand riding style, you simply adjust that section to get the looks you like.Complete windshield kits come complete with the required mountinghardware. For those who want to add their personal touch we alsohave adjusting windows available in various colors.When you want tocreate some convenient up-front storage we have a Holdster windshieldbag available as an accessory.Fits FLST Heritage Softail 1986 thru 1990 and 2006,FLSTC Heritage Softail Classic 1987 to present,FLSTN Nostalgia & Special 1993 thru 1996, FLSTF FatBoy 1990 to present and FLSTFB Fat Boy Lo 2010 topresent without stock or aftermarket (spot) lightbar fitted. FLST, FLSTC and FLSTN models that havethe (spot)light bar can be equipped with thewindscreen ZPN 710687 on the stock mounts730921 Complete windshield kit including mounting brackets710679 Mounting bracket kit only710687 Windshield without mounting brackets710690 Clear adjusting window710691 Light grey tinted adjusting window710692 Red adjusting window710693 Blue adjusting window710694 Black adjusting windowFits 1993 thru 2005 FXDWG, 1980 thru 1985 FXWG,1983 FXDG and all FXST Softail models (exceptSpringer) 1984 to present730901 Complete windshield kit including mounting brackets710680 Mounting bracket kit only710687 Windshield without mounting brackets710690 Clear adjusting window710691 Light grey tinted adjusting window710692 Red adjusting window710693 Blue adjusting window710694 Black adjusting windowFits 1949 thru 1959 FL730911 Complete windshield kit including mounting brackets710681 Mounting bracket kit only710687 Windshield without mounting brackets710690 Clear adjusting window710691 Light grey tinted adjusting window710692 Red adjusting window710693 Blue adjusting window710694 Black adjusting window23-010

WindshieldsFits 1960 thru 1984 FL Duo Glide & Electra Glide730916 Complete windshield kit including mounting brackets710681 Mounting bracket kit only710695 Windshield without mounting brackets710670 Clear adjusting window710671 Light grey tinted adjusting window710673 Blue adjusting window only710674 Black adjusting window onlyFits 1977 thru 1993 FLHS Electra Glide Sport,requires OEM or OEM equivalent windshield framebrackets730917 Complete windshield kit including mounting brackets710681 Mounting bracket kit only710701 Windshield without mounting brackets710700 Clear adjusting window710702 Light grey tinted adjusting window710703 Red adjusting window710704 Blue adjusting window710705 Black adjusting windowNATIONAL CYCLE HOLDSTER WINDSHIELD STORAGEBAGS FOR HEAVY-DUTY WINDSCREENSBoth the Triple and Single Holdster are made from quality, heavy gradesynthetic leather for durability, and weather resistance.The material isUV treated and tested. Holdsters give you a distinctive storagecompartment on the inside of your windshield and they mount directlyto National Cycle's Heavy-Duty windshield frames.The Triple Holdsterhas a main pouch of 11.5" x 5" x 3" (29.2 x 12.7 x 7.6 cm) and 2 sidepouches of 4.5" x 4.5" x 3" (11.4 x 11.4 x 7.6cm).The Single Holdstermeasures 11.5" x 5" x 3" (29.2 x 12.7 x 7.6cm).710696 Triple Holdster storage bag710697 Single Holdster storage bag for Custom Heavy Duty, LowBoy Heavy Duty and Ranger Heavy Duty windscreensWindshields & Frame Accessories23Accessories710696 Triple Holdster storage bag710698 Billet aluminum trim kit23-011

WindshieldsComplete Custom Heavy Duty windshield kitsincluding mounting kits730950 Fits all 1971 thru 1986 Sportster, 1970 thru 1985 FX,FXE and FXEF, all 1977 thru 1985 FXS and FXSB, and1982 thru 1986 FXR models with 35 mm front forks730930 Fits all 1987 to present XL Sportster, all 1993 thru 2005Dyna (except FXDWG), all 1987 thru 1994 FXLR, and all1982 thru 1994 FXR and FXRS with 39 mm forks730940 Fits all 1984 to present FXST Softail models (exceptSpringer) 1993 thru 2005 FXDWG, 1980 thru 1985FXWG and 1983 FXDG with 41 mm forksWindshields & Frame Accessories23NATIONAL CYCLE'S NARROW FRAME HEAVY DUTYWINDSHIELDSNarrow Frame Heavy Duty windshields feature the same qualityconstruction as the Wide Frame Heavy Duty but are designed with avertical strap spacing of 10.75" for a great fit on Wide Glides and amust on Narrow Glides. The lower section with the cut-out for yourheadlight is adjustable to allow you to fit your windscreen in a positionto give you the ultimate weather protection in combination with agood looks.The Custom Heavy Duty is one of our most popular windshields andoffers plenty of height with a slim profile for riders of FX Narrow Glidesand Sportster models who want to tour longer distances. Measures19" thru 21" (48.2 thru 53.3 cm) from the top of the headlight cut outto the top of the screen and is 19" (48.3 cm) wide.The Low Boy Heavy Duty is the cut down version of the Custom. Itis the perfect choice for riders sitting low in the saddle or for the riderthat likes a low screen. Measures 14.3" thru 16" (36.2 thru 40.6 cm)from the top of the headlight cut out to the top of the screen and is19" (48.3 cm) wide.The Ranger Heavy Duty cuts the slim profile to its limits for the riderwho wants just a small shield.The Ranger looks great on Wide Glidesand Narrow Glides as well, and provides protection against wind andrain on the rider's chest. Measures 13.8" thru 16.3" (34.9 thru41.3 cm) from the top of the headlight cut out to the top of the screenand is 16.5" (42 cm) wide.All shields are made out of 4 mm thick Quantum coated LexanPolycarbonate, the highest quality motorcycle windscreen materialavailable. It is vastly superior to any other hardcoat application and isvirtually indestructible, reason why it is covered by National Cycle's 3-year Unbreakable Warranty! To create storage space you may considerto fit the Holdster windshield bag. For the finishing touch of your HeavyDuty windshield we have a chrome plated billet aluminum trim kitavailable.Complete Low Boy Heavy Duty windshield kitsincluding mounting kits730951 Fits all 1971 thru 1986 Sportster, 1970 thru 1985 FX,FXE and FXEF, all 1977 thru 1985 FXS and FXSB, and1982 thru 1986 FXR models with 35 mm front forks730931 Fits all 1987 to present XL Sportster, all 1993 thru 2005Dyna (except FXDWG), all 1987 thru 1994 FXLR, and all1982 thru 1994 FXR and FXRS with 39 mm forks730941 Fits all 1984 to present FXST Softail models (exceptSpringer) 1993 thru 2005 FXDWG, 1980 thru 1985FXWG and 1983 FXDG with 41 mm forks23-012

WindshieldsComplete Ranger Heavy Duty windshield kitsincluding mounting kits730952 Fits all 1971 thru 1986 Sportster, 1970 thru 1985 FX,FXE and FXEF, all 1977 thru 1985 FXS and FXSB, and1982 thru 1986 FXR models with 35 mm front forks730932 Fits all 1987 to present XL Sportster, all 1993 thru 2005Dyna (except FXDWG), all 1987 thru 1994 FXLR, and all1982 thru 1994 FXR and FXRS with 39 mm forks730942 Fits all 1984 to present FXST Softail models (exceptSpringer) 1993 thru 2005 FXDWG, 1980 thru 1985FXWG and 1983 FXDG with 41 mm forksIndividual Windshields710706 Custom Heavy Duty731107 Low Boy Heavy Duty731108 Ranger Heavy Duty710710 Replacement Adjusting WindowIndividual Mounting bracket kits710707 Fits all 1971 thru 1986 Sportster, 1970 thru 1985 FX,FXE and FXEF, all 1977 thru 1985 FXS and FXSB, and1982 thru 1986 FXR models with 35 mm front forks710708 Fits all 1987 to present XL Sportster, all 1993 thru 2005Dyna (except FXDWG), all 1987 thru 1994 FXLR, and all1982 thru 1994 FXR and FXRS with 39 mm forks710709 Fits all 1984 to present FXST Softail models (exceptSpringer) 1993 thru 2005 FXDWG, 1980 thru 1985FXWG and 1983 FXDG with 41 mm forksAccessories710699 Billet aluminum trim kit for Custom Heavy Duty and LowBoy Heavy Duty screens710697 Single Holdster storage bag for Custom Heavy Duty, LowBoy Heavy Duty and Ranger Heavy Duty windscreensNATIONAL CYCLE DEFLECTOR SCREENThis 15 1/4" (39 cm) tall National Cycle windscreen is made from DOTapproved acrylic. Comes with National Cycle's patented and innovativeRake-Adjust hardware which permits 100 degrees of screen adjustmentwithout moving the mounting hardware.A double Ball-socket attachesthe screen to the mounting hardware, providing simple assembly anda safety release. Fits both 7/8" and 1" handlebars.710658 Clear Deflector710659 Tinted DeflectorNATIONAL CYCLE FLY-SCREEN LSA small, only 9" (23 cm) tall and 9 3/4" (25 cm) wide windscreen toretain the custom built look. The unique fork mount hardware withcountersunk screws creates a very clean, billet appearance. Easy to fitand available in light tint or dark tint with highly polished Chromeframe.Fits Sportsters, Big Twins and Wide Glide FX modelswith 39 or 41 mm forks710662 Light tinted710663 Dark tintedFits 2006 to present Dyna (except FXDF) and 2002 topresent V-Rod731168 Light tinted731169 Dark tintedWindshields & Frame Accessories2323-013

WindshieldsGLADIATOR WINDSHIELD BY NATIONAL CYCLE'SThe Gladiator is custom look windshield.The clean appearance of thiswindshield is achieved by mounting it directly to the top handlebarclamp, leaving the bike's handlebars and forks uncluttered. This fullyadjustable bracket uses national Cycle's Dual Pivot action, allowinginfinite positioning for rider heights or weather conditions. A simplewrench is all that's needed, satisfyingly simple in a complex world.These windshields are made from the finest windshield material in theworld, Lexan polycarbonate. This material is 20 times more impactresistant than acrylic or other plastic windshields. Additionally thispolycarbonate features National Cycle's exclusive Quantum coating.This provides 10 times better scratch resistance than any otherwindshield material on the market. Edges of the screen are radiusedfor safety and enhanced appearance. Gladiator windshields are14 1/2" (37 cm) high and are 12 1/2" (32 cm) wide.They are availablein Dark Tint or Light Tint with chrome or black mounting hardware andfeature a 3-year warranty against breakage.Windshields & Frame Accessories23Years Chrome Hardware, Chrome Hardware, Black Hardware, Black Hardware,Light Tint Shield Dark Tint Shield Light Tint Shield Dark Tint ShieldFLST Heritage Softail 1986-1990 731129 731130 731131 731132FLSTC Heritage Softail Classic 1987-2008 731129 731130 731131 731132FLSTF Fat Boy 1990-2006 731129 731130 731131 731132FLSTF/FLSTFB Fat Boy/Lo 2007 to present 731147 731148 - -FLSTN Heritage Softail Nostalgia 1993 731129 731130 731131 731132FLSTN/H Heritage Softail Nostalgia Special 1994-1996 731129 731130 731131 731132FLSTSB Cross Bones 2008 to present 731139 731140 - -FXD Dyna Super Glide 2006 to present - - 735215 735216FXD/FXDX Dyna 1993-2005 731129 731130 731131 731132FXD35 35th Anniversary Super Glide 2006 731129 731130 731131 731132FXDB Dyna Street Bob 2006 to present 731139 731140 - -FXDC Dyna Super Glide Custom 2005-2006 731129 731130 731131 731132FXDC Dyna Super Glide Custom 2007 to present 731129 731130 731131 731132FXDF Dyna Fat Bob 2008 to present 731139 731140 - -FXDG Disc Glide 1983 731129 731130 731131 731132FXDL Dyna Low RiderFXDL Dyna Low Rider1994-20052006 to present731129731139731130731140731131-731132-FXDS Dyna Low Rider Convertible 1994-2000 731129 731130 731131 731132FXDWG Dyna Wide Glide 1993-2005 731129 731130 731131 731132FXDWG Dyna Wide Glide 2006-2008 731139 731140 - -FXDWG Dyna Wide Glide 2010 to present 731139 731140 - -FXR/FXRS Low Rider 1982-1994 731129 731130 731131 731132FXST Softail Standard 1984-1990 731129 731130 731131 731132FXST Softail Standard 1999-2007 731129 731130 731131 731132FXSTB Softail Night Train 1999-2009 731129 731130 731131 731132FXSTC Softail Custom 1987-1999 731129 731130 731131 731132FXWG Wide Glide 1980-1985 731129 731130 731131 731132XL 883 & XL 1200 Sportster 1988 to present 731133 731134 731135 731136XL 883C & XL 1200C Sportster Custom 1996 to present 731137 731138 - -XL 883L & XL 1200L Sportster Low 2005 to present 731133 731134 731135 731136XL 883R & XL 1200R Sportster Roadster 2002-2008 731133 731134 731135 731136XL 1200N Nightster 2007 to present - - 735215 735216XL 1200S Sportster Sport 1996-2003 731133 731134 731135 731136XL 883N Iron 2009 to present - - 735215 735216XR1200 2009 to present 730978 730979 730980 73098123-014

WindshieldsSTINGER QUICK-RELEASE WINDSHIELDSMade in the USA by National Cycle from unbreakable and highly scratchresistant Quantum-coated polycarbonate, Stinger windshields are agreat recipe to any amount of venom the mean streets and raw windscan throw your way.Just add one part of Stinger to one part of motorcycleand there you go. Flowing lines, edge and attitude that fit your frontend like a glove.And most important, after you have installed NationalCycle's hardware kit it just takes you 5 seconds to take the Stinger fromyour bike and transform it to bare naked again. The Quick-Releasehardware is so small that it is hardly noticeable when the Stingerwindscreen has been taken off.Screens are rake adjustable to match yourlength and riding style. All Stinger windscreens are dark or light tintscratch resistant FMR hardcoated polycarbonate and are covered byNational Cycle's 3-year warranty against breakage.Available as completekit with windscreen and mounting bracket kit, as well as individual.Fits all 1994 to present XL Sportster modelsAlso fits most Dyna and FXR models with 39 mm forksbut might interfere with instruments and/or handlebars730982 Complete light tint windscreen with Quick-Releasemounting bracket kit, 13" (33 cm) high and 16" (41 cm)wide731164 Light tint windshield only731101 Mounting bracket kit onlyFits all FLST, FLSTC, FLSTF, FLSTFB and FLSTN Softailmodels 1986 to present, except SpringersNote: Will not fit with OEM or aftermarket spotlight bars730984 Complete dark tint windscreen with Quick-Releasemounting bracket kit, 12.5" (32 cm) high and 18.25"(46 cm) wide731166 Dark tint windshield only731104 Mounting bracket kit onlyFits all FLHR, FLHRC and FLHRS Road King models1994 to present730985 Complete dark tint windscreen with Quick-Releasemounting bracket kit, 10.5" (27 cm) high and 18"(46 cm) wide731167 Dark tint windshield only731106 Mounting bracket kit onlyWindshields & Frame AccessoriesFits all 2007 to present FXDC Dyna SuperglideCustom modelsAlso fits most 2006 to present Dyna models with 49 mmforks (except FXDWG) but might interfere withinstruments and/or handlebars730983 Complete dark tint windscreen with Quick-Releasemounting bracket kit, 10.5" (27 cm) high and 17"(43 cm) wide731165 Dark tint windshield only731103 Mounting bracket kit onlyHeight is measured from the headlight cutout in a verticalline level to the top of the screen in the fully raked forwardposition. Width is measured in a straight line across theback of the shield at its widest point.2323-015

WindshieldsWindshields & Frame Accessories23REPLACEMENT WINDSHIELD FOR ROAD KINGNational Cycle offers this premium replacement for the OEM windscreenon your Road King. Made from clear 4 mm thick polycarbonate, 33%thicker than the OEM shield, it is very crack resistant. The shield iscoated with National Cycle's exclusive Quantum Hardcoating. Thisresults in a scratch resistance 10 times greater than OEM.Overall heightis 27" (685 mm), width 21 3/4" (555 mm). Utilizes bike's stockmounting hardware. Fits Road King models from 1994 to present.710940 Road King replacement windshieldNATIONAL CYCLE REPLACEMENT SCREENS FOR FLH,FLHT AND FLHTC FAIRINGSNational Cycle replacement screens offer superior optics and diamondlikeclarity.They are made of hard coated GE Lexan polycarbonate forlasting shine and durability. All screens are pre-drilled and precisionformed and bolt straight on to the OEM fairings.Fits 1986 thru 1995 FLHT and FLHTC fairings710667 Clear, installed height 12"710668 Light tinted, installed height 6"Fits 1996 thru 1998 FLHT and FLHTC fairings710660 Clear, stock height710665 Light tinted, stock height710666 Dark tinted, 4" lower than stockFits 1960 thru 1985 FLH fairings710682 Clear, installed height 18"710688 Tinted, installed height 18"710689 Tinted, installed height 7"NATIONAL CYCLE HAND DEFLECTORSFor the riders who prefer to be on their bike anytime, anywhere, in anytype of weather, we offer National Cycle Hand Deflectors. HandDeflectors are an easy-to-install solution for keeping your hands warmand dry. Coupled with a windshield, hand deflectors protect from thewind and rain. Deflectors are, depending on the application, securedto the control boss by your mirrors or to the turn signal mounts. Theyallow plenty of room for lever movements and for riders with largegloves. These deflectors make a windshield function like a fairing. Alldeflectors are clear acrylic and come with steel mounting hardware.Fits FLH and FLT series Touring models 1960 topresent, FXSTB NightTrain 2000 to present and FLSTSoftail models 1986 to present (except FLSTFFatBoy and FLSTS Springer)731150 Hand deflectors, 9.75" (24.7 cm) wide, 5 3/4" (14.6 cm)highFits all Sportster models 1983 thru 2003, FX models1970 thru 1985,, FLSTF FatBoy 1990 to present,FLSTS Softail Springer Dyna models 1993 to present(except 2010 and later Dyna Wide Glide), FXSTSoftail models 1984 to present (except FXSTBNightTrain)731151 Hand deflectors, 9.75" (24.7 cm) wide, 5 3/4" (14.6 cm)highFits all Sportster models 2004 to present, includingXR 1200731152 Hand deflectors, 9.75" (24.7 cm) wide, 4.38" (11.1 cm)high23-016

Windshields/Windshield AccessoriesWINDSHIELDS FOR FL MODELSThese windshields are designed to fit the 4 Speed FL models from1960 thru 1984 as OEM replacements. Made from acrylic for additionalstrength and light weight. Feature chrome braces and easy to replacewindows, which are interchangeable with OEM parts. Adjustablewindows and lower windows separately available. Each kit comescomplete with hardware.Complete windshield kits163041 With clear upper and lower windows (OEM 57996-60)163049 With clear upper and red lower windows163050 With clear upper and blue lower windowsReplacement upper window163048 ClearReplacement lower windows163042 Clear163043 BlueReplacement adjustable windows163045 Clear163046 BlueROADRADIO RADIO CONSOLESThe RoadRadio is made out of black automotive grade Rhino-Tuff ABSplastic and takes standard size car radio's and CD/Cassette/radiocombinations with 6 1/2" (16 cm) speakers. It is designed to bolt ontothe windshield of Road Kings, FatBoys, Heritage Softails, Dyna's andSportsters.The RoadRadio comes with weatherproof cover,all necessaryhardware, and rubber shock mounts. It also allows for hidden mountof an antenna. Installation is bolt on easy. The RoadRadio Console is18" (46 cm) wide, 7 1/2" (19 cm) high and is 3 3/4" (9.5 cm) deep atthe center.723300 Fits RoadKing and Softail models with 41 mm forks andQuickRelease windshield723301 Fits RoadKing and Softail models with 41 mm forks andfixed mount windshield, as well as most fairing equippedmodels723302 Fits Dyna, Sportster en Springer Softail models withwindshieldNote: Not all CD players work when mounted vertically, RoadRadiosuggests the use of a Pioneer CD player. You may also consider thepurchase of a radio that plays MP3's from a USB stick.PM SPEAKER COVERS FOR TOURING MODELSThe popularity of the FLH and FLT Touring models, also known as"Baggers",inspired Performance Machine to create a line of accessoriesspecifically for these bikes. PM styling was applied to saddlebag latchcovers, fuel doors, and speaker covers. Machined from billet aluminumand treated to PM's time tested chrome process, the speaker covers arethe icing on the cake for every Bagger.Available in Smooth and Fluteddesign with a chrome or black finish. Matching saddlebag latch coversand fuel doors can be found elsewhere in this Zodiac Bikers Book.Windshields & Frame Accessories23Fits FLHT Electra Glide and FLHX Street Glide1996 to present743121 Smooth, chrome743122 Fluted, chrome743123 Fluted, black23-017

Windshield AccessoriesUNDER SEAT MOUNTED AIR DEFLECTORS FORTOURING MODELSThese air deflectors are to be mounted to the frame, just under thefront of your seat and are designed to direct the heat away from therider to improve comfort on hot summer rides. Deflectors are madefrom tough black plastic. Easy to install on all 2001 thru 2008 FLH andFLT series models. Sold in pairs complete with required mountinghardware.090526 Under seat air deflectors for Touring models(OEM 58022-07A)NESS SIDE COVERS FOR 1993 THRU 1996 FLT• Designed to replace your factory side covers for a cleaner look• Constructed of paintable ABS plastic• Sold in pairsA03612 Ness side cover 1993 thru 1996 FLTWindshields & Frame AccessoriesNESS SIDE COVERS FOR 1997 TO PRESENT FLT• Arlen's design gracefully blends into stock saddlebags or Ness Big-Bags for a full custom look. Covers are longer than stock to addadditional styling• Covers fit over the factory units• Constructed of ABS plastic with a black finish• Sold in pairsA03623 Fits 1997 thru 2008 with rear crash barsA03613 Fits 1997 thru 2008 without rear crash barsA03624 Fits 2009 to present FLT with rear crash barsA03614 Fits 2009 to present FLT without rear crash bars23NESS FLT NECK COVERS• These neck covers hide the ugly welds found on the neck of a stockframe• Constructed from ABS plastic• Fits FLT frames 1993 thru 2007• Sold in pairsA03611 Paintable finishNESS SIDE COVERS FOR FXR• Constructed from high-impact ABS plastic• Conceals brake and electrical components while yielding an appealinglook• Ready for prep and paint• Fits all FXR models 1982 thru 1994• Sold in pairsA03600 FXR side covers23-018

Windshield Accessories, Motorcycle CoversMOTORCYCLE COVERSThis Guardian features scorch-resistant aluminized panels to cover hotengine and exhaust pipes, reinforced krommets for use with a cable orbar lock, elastic cord sewn into the entire bottom to provide a securefit, and a convenient stuff bag for travel storage. The Guardian isfabricated from heavy-weight urethane coated polyester to insurewaterproof capability plus the moisture-guard venting system on allthese models and flannel windshield liner. Available for severalmotorcycles such as Sport/Custom models and Dressers with or withoutwindshield and luggage cases.234140 Sport/Custom, fits all 500 CC to 1500 CC sport andcustom models, will fit most mini/sport fairing equippedbikes234141 Full dress, fits all 500 CC to 1500 CC dress cycles withfairing and luggage234142 Touring/Full dress, fits largest factory full dress cycles upto 1500 CCNESS STASH TRAY FOR FXR• Constructed from durable ABS plastic• Form fitted to go under your seat for easy access to tools, spark plugs,gloves, etc.• Fits all FXR models 1982 thru 1994A20100 Stash tray for FXRCOVERKING MOTORCYCLE COVERSCoverking Motorcycle Covers are designed to protect a motorcyclefrom the elements without scratching the delicate paint surface. Elastichems on the front and rear keep the cover snug, while nylon grommetsallow for security locks to keep the cover secure. Available in 2 sizes,one specifically designed for Full Dresser models with windshield orfairing and saddlebags, the other one fits all Harley's and other Cruisermodels without windshield and saddlebags.735100 Fits Full Dresser models with windshield or fairing andsaddlebags735101 Fits all Harley's and other Cruiser models withoutwindshield and saddlebagsWindshields & Frame Accessories2323-019

Farings"NO FEAR" UNIVERSAL-HANDLEBAR FAIRINGThe "No Fear" handlebar fairing will give your bike the looks of a HighTech Mean Machine. The fairing measures only 390 mm wide and245 mm high and is made from strong white tinted ABS. Comescomplete with an "E" approved dual lamp unit and two H3 Halogen55 Watt bulbs. Mounting brackets are not included, these must becustom made.721663 "No Fear" handlebar fairing741156 Replacement light unit set"ZOMBIE" UNIVERSAL-HANDLEBAR FAIRINGThe "Zombie" is what your bike needs when you are looking for ahandlebar fairing that lets your bike stand apart from the crowd. Thisfairing is made from strong black tinted ABS. Mounting brackets arenot included, these must be custom made.741157 "Zombie" handlebar fairingWindshields & Frame Accessories23"E" APPROVED UNIVERSAL DUAL LIGHT UNIT SETFOR HANDLEBAR FAIRINGFor those who want to create their own design fairing we offer thisuniversal light unit set to start with.This "E" approved dual lamp unitcomes completely assembled and including 12 Volt 55 Watt Halogenbulbs.741156 Universal light unit set"INVADER" HANDLEBAR FAIRINGThe "Invader" handlebar fairing makes your Streetfighter look like amean and aggressive piece of machinery.The fairing is only 17" (43 cm)wide and made from strong dark tinted acrylic. Comes complete withan "E" approved dual lamp unit and two H4 Halogen 12Volt 60/5Wattbulbs. Mounting brackets are not included but must be custom made.For those that want it "the easy way" we also have a very universalmounting kit available.721446 "Invader" handlebar fairing721447 Universal mounting kitNESS WINDSHIELD SKIN FOR ROADKING• Give your Road King a full fairing look at a fraction of the cost• Innovative bolt-on design mounts to your factory Road King windshield in minutescan beused on various applications• Available in gloss black coated or paintable ABS plasticA06940 Gloss blackA06941 Paintable23-020

FaringsNESS BOB DRON FAIRING FOR ROADKING• Accepts factory spot lights• Fairing body constructed from heavy ABS plastic• Windshield is smoked Plexiglas• Kit includes fairing body,smoked windshield,stainless steel mountingbrackets and mounting hardwareNote: Please check fit and finish prior to painting. Neither Arlen Nessnor Zodiac will be responsible for any damage sustained to paint jobsA06950 Bob Dron Fairing kitA06951 Replacement windshieldNESS ORIGINAL FAIRING KITS• The fairing that started it all• Universal design can be used on various applications• Fairing body constructed in heavy ABS plastic• Windshield is smoked Plexiglas• Kit includes fairing body, smoked windshield, universal mountingbrackets and windshield mounting screws• Arlen Ness suggests to use these fairings with A08006 Fatbob draghandlebars• Installation on Narrow Glide front ends is easiest usingA06048 custom headlight brackets• Installation on Wide Glide and inverted front ends require fabricationof custom mounting bracketsNESS DIRECT BOLT-ON FAIRING KIT FOR DYNA &SPORTSTER• The famous Ness fairings our now also available in complete kits forsimple installation• Complete bolt-on kits available for 2006 to present Dyna modelswith bottom mount headlight, except FXDF and FXDWG• Complete bolt-on kits also available for 2004 to present XL Nightsteror any XL models with 39 mm forks, top mount headlight andNightster handlebars• Fairing body constructed in heavy ABS plastic• Windshield is smoked PlexiglasNote: Please check fit and finish prior to painting. Neither Arlen Nessnor Zodiac will be responsible for any damage sustained to paint jobsFits 2006 to present Dyna models except FXDF andFXDWGA06033 Gloss black finishA06035 Paintable finishWindshields & Frame AccessoriesNote: Please check fit and finish prior to painting. Neither Arlen Nessnor Zodiac will be responsible for any damage sustained to paint jobsA06041 Plain fairingA06043 Louvered fairingA06087 Plain fairring Custom Wide Glide and Custom Mid-GlideAccessoriesA06048 Custom headlight bracketsReplacement wind screenA06047 SmokedFits 2004 to present XL Nightster or any XL modelswith 39 mm forks, top mount headlight andNightster handlebarsA06037 Gloss black finishA06039 Paintable finishReplacement wind screenA06047 Smoked2323-021

Crash/Highway BarsWindshields & Frame Accessories23CHROME CRASH/HIGHWAY BARS FOR HARLEY-DAVIDSONBeautiful Chrome plated Highway Bars feature heavy gauge diametertubing with smooth,even Mandrel bends for show-quality appearance.These bars will give the typical Big Twin look to any Harley-Davidsonand are a perfect match with the rear highway bars. Come completewith mounting hardware and instruction sheet for a quick and easybolt-on installation. Mounting the rear highway bars as well will givethe 50's Panhead look to your Harley-Davidson.Note: 1990 Thru 1992 Heritage Softail Classics (FLSTC) require theinstallation of Zodiac part number 233558 bracket kit to replace theoriginal Equipment brackets which attach the saddlebag support frameto the foot peg bolt.Additionally neither of the chrome toolbox kits maybe installed because of contact with the saddlebag support frame.Front Highway Bars241243 Fits all Evolution Sportster models 1986 thru 2003,1 1/4" (32 mm) tubing (OEM 49018-88C)233553 Fits 4 Speed FL models with Swingarm frames from1958 to early 1979, 1 1/4" (32 mm) tubing(OEM 49038-58B)233555 Fits 4 Speed FX models from 1972 thru 1986 and allSoftail models (except Heritage and Fat Boy) from 1984thru 1999, 1 1/4" (32 mm) tubing (OEM 49016-72D)233615 Fits 1982 thru 1994 and 1999 thru 2000 FXR models,1 1/4" (32 mm) tubing241245 Fits Heritage Softail and FatBoy models from 1986 thru1999, 1 1/4" (32 mm) tubing (OEM 49004-90)233549 Fits 1988 thru 1996 FLH and FLT models, 1 1/4"(32 mm) tubing (OEM 49184-88)233510 Late 1978 thru 1984 FL models and late 1979 thru1984 FLH models, 1 1/4" (32 mm) tubing(OEM 49040-79)241241 Fits all Softail models 2000 to present, except Heritageand FatBoy models, 1 1/4" (32 mm) tubing(OEM 49004-00)722024 Fits Heritage Softail, Heritage Springer and Fat Boymodels from 2000 to present, 1 1/4" (32 mm) tubing(OEM 49004-00)722026 Fits 1993 thru 2005 FXDS and FXDWG, FXDX 1999 thru2005, and all other forward control equipped 1991 thru2005 Dyna models, 1 1/4" (32 mm) tubing(OEM 49010-93)722027 Fits Dyna Glide models 1991 thru 2005 with mid-mountcontrols, 1 1/4" (32 mm) tubing (OEM 49007-90A)Rear Highway Bars233554 Fits 4 Speed FL models from late 1967 thru 1984, 7/8"(22 mm) tubing (OEM 49137-67B)233557 Fits all Softail models (except FatBoy and 1990-upFLSTC, see note) 1986 to 1999, 1" (25.4" tubing(OEM 49158-89B)23-022

Crash/Highway BarsFEHLING CHROME HIGHWAY BAR FOR V-RODThis highway bar offers good looks. All necessary hardware andmounting instructions are included. Fits all V-Rod models. Bar does notgive protection to the rider or passenger if the bike crashes.It is a "looksonly" crash bar.731655 Chrome crash bar for V-RodFEHLING HIGHWAY BARS FOR 2006 TO PRESENTDYNAEuropean made one-piece highway bars manufactured from 30 mm(1 3/16") tubing. Has a show chrome finish for a class appearance.Comes complete with necessary hardware.731628 Fits 2006 to present Dyna models, except FXDWG DynaWide GLide and FXDF Dyna Fat BobFEHLING HIGHWAY BARS FOR 2004 TO PRESENTSPORTSTEREuropean made one-piece highway bars. Fits 2004 and later Sportstermodels.The bars manufactured from 30 mm (13/16") tubes are usedfor the XL883 and XL1200R models and the bars manufactured from38 mm (1 1/2") fit the XL53C and XL1200C Sportster. Show chromedfor a class appearance.All necessary hardware is included.731626 Fits 2004 to present XL883 and XL1200R731627 Fits 2004 to present XL53C and XL1200CWindshields & Frame Accessories2323-023

Rubber PartsFOOTREST RUBBER FOR FXR/XLMODELSDrivers peg replacement rubber, fits all FXRmodels 1982 thru 1994 and Sportster 1982-2003 (OEM 50646-82).355017 Foot-rest rubberKICKSTART PEDAL RUBBERReplacement rubber for Classic style kickstartpedal. Fits OEM as well as Zodiac Classicstarter pedal (OEM 33182-63TA).358017 Kickstart pedal rubberTRIM RUBBER FX DASHThick style black rubbertrim for all FX withdual tank mounted instrument housing. Fillsthe gap between the housing and the tankswhile isolating the gauges from vibration(OEM 61401-82).358023 Trim rubber FX dashWindshields & Frame AccessoriesRIDERS-PEG RUBBER FOR XL-FXMODELSReplacement rubber for K & XL models1952 to present and FX models 1971 topresent (OEM 50940-52).355008 Riders peg rubberBRAKE PEDAL PAD KIT FOR FLMODELSGives you an easy to operate, extra large rearbrake pedal, fits 1965 and later FL models(OEM 36956-65TA).361519 Brake pedal pad kit361520 Replacement rubber onlyCLUTCH AND BRAKE PEDALRUBBER FOR FL AND FLHMODELSHeavy-Duty pedal rubber, fits all FL and FLHbrake and clutch pedals (OEM 36954-62T).358011 Clutch and brake pedal rubberKICKSTART RUBBER FOR FX-XLMODELSReplacement rubber for late "Swing"kickstarter. Fits XL 1963 to present and FX1971 to present.358032 Kick starter pedal rubber(OEM 33189-63)SWINGARM BUMPER RUBBERFOR SOFTAILSThis bumper rubber prevents that theswingarm touches the frame when yourshocks give up. Fits all Softail models1986 thru 1999 but is also suitable for mostaftermarket Softail style frames. Bumperrubber comes with an inserted 1/4" UNC studfor easy fitting. Sold each (OEM 11451).358208 Swingarm Bumper RubberBATTERY MOUNT STUD FOR XLHeavy-duty rubber battery tray stud mountstud for XL from 1995 to present. Has one5/16 x 1/2" UNC, and one 1/4 x 1/2" UNCthreaded stud (OEM 62569-94).358220 Battery stud 5/16-18x1/2"2323-024BRAKE PEDAL RUBBER FOR FXMODELSReplacement brake pedal rubber for all FXmodels 1971 thru 1985 (except FXWG &FXST) with 4 Speed gearbox (OEM 42394-65).358009 Brake pedal rubber for FXmodelsKICKSTAND BUMPER PADKickstand bumper pad, acts as stop for BigTwin kickstands. Fits all Big Twins 1970 andlater, self adhesive (OEM 50100-70).358020 Kickstand bumper padFRONT MOTOR MOUNT FOR FXRAND TOURING MODELSReplacement front motor mount for 1980 topresent FLH and FLT series models and1982 thru 1994 FXR models (OEM 16207-79B).032360 Front motor mount

Rubber PartsHORN MOUNT RUBBERGetting tired of broken horn brackets on youcustom motorcycle. Sometimes small thingscan make the difference. Mount your hornwith this rubber to the frame and vibrationsfrom frame to horn will be eliminated.Suitable for OEM replacement and manycustom applications. Studs are 5/16 x 1/2"UNC (OEM 69123-92).358221 Horn mount rubberLICENSE PLATE MOUNT RUBBERSThese two-piece rubber spacers isolate thelicense plate from vibration, and permits themount to be tailored to the profile of thefender, for much tighter, cleaner look. Mountsto the standard hole pattern on all rearfenders (except FXWG and FXST) from1955 to present.358079 Rubber mounts for license plate1 1/4" OIL COOLER CLAMP SETTo mount oil coolers to frame tubes. Alsousable for many custom applications. Clampis made of flexible steel strip material withrubber "anti vibration" trim (OEM 62408-87).061180 Oil cooler clamp setHEX HEAD ANTI-VIBRATIONMOUNTSAnti-vibration mounts are perfect formounting gas tanks, oil tanks, battery boxes,electronics and many other customapplications to insulate them from vehiclevibrations.These "Hex Head" mounts featuretwo 1/4"-20 x 1/2" UNC studs and are soldin packs of 5.358118 Anti vibration mount with 1/4"UNC studs, 5-packCHROME COVERED ANTI-VIBRATION MOUNTSChrome covered anti-vibration mount withtwo 1/4" UNC studs.The trick chrome platedcover doesn't interfere with the function. Useto mount oil tank, battery box, or anythingelse that must be isolated from vibration.Soldeach.358306 Chrome covered silent-block(OEM 62563-65T)ANTI-VIBRATION MOUNTSAnti-vibration mounts (or silent-blocks) areperfect for mounting gas tanks, oil tanks,battery boxes, all kinds of electronics andmany other custom applications to insulatethem from vehicle vibrations.Available in thesizes 1/4" UNC, 5/16" UNC, and 5/16" UNF.The anti-vibration mounts with two 1/4" -20 x 1/2" studs replaces the OEM 62563-65T rubber /stud mount as used for mountingthe Harley oil tanks and battery boxes and issold in 10 packs.For custom purposes we alsohave anti-vibration mounts with two 5/16"UNF x 3/4" studs or two 5/16" UNC x 3/4"studs which are sold in 3 packs.358019 With 1/4" UNC studs, 10 pack(OEM 62563-65T)358210 With 5/16" UNF studs, 3 pack358211 With 5/16" UNC studs, 3 packHEAVY-DUTY RUBBER MOUNTSWITH STUDSThese "stronger than stock" rubber batterytray and oil tank mounts have an internalwound spring that is welded to each studplate and then heat-sealed inside of thebonded rubber housing.The studs are 1/4"-20 x 1/2" long on each side. These Heavy-Duty rubber mounts will outlast anyothermount available today (OEM 62563-65).Soldin 10 packs.358080 Heavy-Duty rubber mounts withstuds, 10-packWindshields & Frame Accessories23RUBBER GROMMETThese rubber grommets are used to plug offthe filler hole on 1980 thru 1984 FLT modelswith oil bath final drive,as well as on the hornbumper bracket on 1973 thru 1985 Sportster.Made by James Gaskets and sold to dealersin packs of 5.742406 Rubber grommet, 5-pack(OEM 11428)23-025

Frame AccessoriesLEFT SIDE TOOLBOX FOREVOLUTION SOFTAILThese lockable chrome plated toolboxes areeasy to install on most models, except FLSTSand FLSTSC Softails,or models equipped withFishtail style crossover exhausts. Mountingkit must be ordered separately.013120 Left side toolbox(OEM 64207-89B)TEARDROP TOOLBOXPerfect reproduction of the "Old Style"toolbox. Can be used as OEM replacementon Harley Big Twins 1940 thru 1959 oradapted to any motorcycle as lockabletoolbox. Includes original style lock and key.Show-Chrome finish. Can also be fitted onthe right on most 1984 thru 1999 Softailmodels when installed with our chromebracket kit ZPN 013121.013102 "Old Style" teardrop toolbox(OEM 64205-40)013099 Replacement keys, set of 2(OEM 64340-26)LEFT SIDE TOOLBOXLeft hand version of the classic toolbox asused on many models from 1940 thru 1959.Available in a bright Chrome finish. This leftbox is the perfect accessory for the FLSTFFatBoy as the right side exhaust will notpermit the installation of a toolbox on thisside. Mounting bracket with hardware isseparately available.013103 Toolbox left side ChromeWindshields & Frame Accessories013122 Mounting bracket withhardware013099 Replacement keys, set of 2(OEM 64340-26)013121 Chrome right sidebracket kit for 1984 thru 1999Softail013122 Mounting bracket withhardware013099 Replacement keys, set of 2(OEM 64340-26)23AIR SCOOP FOR BIG TWINSChrome plated air scoop, fits all Shovelheadengines. Improves the cooling of the rearcylinder by directing the air flow into thecylinder.301666 Air scoop for Big Twins23-026

Frame AccessoriesPRO-ONE STASH TUBEThis stash tube not only offers you some roomto put tools or papers in, but also addssomething special to your bike. Made of billetaluminum and offered with universal fitclamps so you can choose the place whereyou want to attach it to your bike. Availablein a long and a short version, long version is10" long and the short version is 7" long.Tube has perfect chrome plated finish.721796 Stash tube long Millenniumsmooth, with universal fit, fitsframe tubes from 1" thru1 1/4"721797 Stash tube short Millenniumsmooth, with universal fit, fitsframe tubes from 1" thru1 1/4"PRO-MAX HYPER STORAGETUBESPro-Max "Hyper" storage tubes are CNCmade from 6061T6 billet aluminum andbeautifully chrome plated. They featurescrew-on end caps with an Oring seal to keepdry whatever you carry in there. They offerconvenient storage for essential tools,documents, sunglasses or anything else youneed to store securely.Comes with adjustablemounting clamp with a snug fit on frametubes from 1" thru 1 1/2" (25 thru 38mm).Available in 1" (25mm) diameter and 7 1/2"(19 cm) long, as well as in 2.2" (56 mm)diameter in 7" (18 cm) or 10" (25 cm) long.All sizes come in Smooth or Ball Milled finish.Smooth Ball Milled094904 094905 1" (25 mm)diameter, 7 1/2"(19 cm) long094901 094903 2.2" (56 mm)diameter, 7"(18 cm) long094900 094902 2.2" (56 mm)diameter, 10"(25 cm) longSPARK PLUG HOLDERChrome plated spark plug holder, clamps onto the rear frame tube. Accepts long reachplugs (OEM 91775-51).085000 Spak Plug holderIGNITION MODULE COVER FORSPORTSTER MODELSReplaces the OEM black module cover on1982 thru 2003 Sportster models, has abeautiful chrome finish (OEM 66328-82T).Chrome hardware for the finishing touch isseparately available.301320 Ignition module cover 1982thru 2003 Sportster238729 Ignition module cover, 1991thru 1997 Sportster, knurledallen headsLOUVERED SIDE COVERS FORFXR MODELSAdd styling to the plain area on your FXR bike,when using these louvered side covers.Replaces the OEM plastic parts. Will fit FXRmodels from 1982 thru 1994.These chromeside covers make a perfect addition to yourbike. Sold as a set (OEM 66356-82).301727 Louvered side cover setSWINGARM CAPS FOR FXRMODELSChrome plated Swingarm pivot end caps, fitthe 1982 thru 1994 FXR models.This cap setlooks even better in combination with ourChrome side cover set.301055 Swingarm capsPHANTOM II COVERS FORSOFTAILA sleek, streamlined set of die-cast coversthat blend perfectly with the clean lines ofthe Softail frame and conceal the unsightlyaxle nut and adjusters. Covers are brightlychrome plated and install in minutes. Fits late1986 Heritage Softail, and all other Softailmodels 1987 thru 2007,except FLSTB FatBoy,FLSTD Deuce and FLSTN Nostalgia with stockShotgun style exhaust system. Sold in pairsfor left and right side.301590 Phantom II Swingarm coversSTAINLESS STEEL SWINGARMPIVOT BOLTS FOR SOFTAILMODELSThese Stainless Steel Swingarm pivot bolts fitall Softail models 1984 thru 1999 as well asmost aftermarket frames and Swingarms.Sold in sets of 2 and come complete withwashers.Available in a machined and highlypolished finish (OEM 4961).237979 Machined finish237779 Polished finishWindshields & Frame Accessories2323-027

Frame AccessoriesFIBERGLASS AIR SCOOP WITH OVAL AIR OPENINGBY FORCE PRODUCTSThese Force Air Scoops with oval scoop hole not only add a racy lookto your bike but also direct an air stream to your engine providing extracooling. Made in the USA from strong and lightweight fiberglass inprecision built moulds. Has a white Gel-coat finish making it ready foryour painter's preparation. Air Scoop comes with some mountinghardware, but for those who want a quick and professional installationwe suggest to use our ZPN 741008 EZ mounting kit. Air Scoop isavailable for Evolution Softail models 1984 thru 1999, and EvolutionDyna models 1991 thru 1998.741000 Fits 1984 thru 1999 Evolution Softail models741001 Fits 1991 thru 1998 Evolution Dyna models741008 Optional EZ mounting kitWindshields & Frame AccessoriesSIDE COVER SET FOR FXR MODELSSuper looking Chrome plated side cover set for 1982 thru 1994 FXRmodels. Replaces the standard plastic covers. Complete set, left andright (OEM 66356-82).301416 Side cover setCHROME FRAME COVERS FOR SPORTSTERThese frame side covers, with their mirror-like show chromed finish,add a highlight to your Sportster. Available for the right oil tank side,and left battery side. Sold each. Fits all Sportster models 2004 topresent.301015 Chrome right side oil tank cover (OEM 66262-04)301016 Chrome left side battery cover (OEM 66261-04)23SWINGARM PIVOT BOLT COVERS FOR SOFTAILMODELSChrome plated Swingarm cover for all Softail models (except FatBoy)from 1984 thru 1999.They are held in place with set screws and giveyour bike that "finishing touch".099037 Swingarm pivot bolt coversCHROME FRAME ACCENTS FOR SOFTAILThese easy to install chrome rear frame accents fit perfectly in therecesses in the rear frame section of most Softails.The inserts are heldin place by a special foam adhesive.These covers add a finishing touchin just a few minutes. Sold in sets of 2 for the left and 2 for the rightside. Fits Softail models 1986 to present, except 2000 and later FLSTF,FLSTN and FXSTD models.301791 Chrome Softail frame accent kit (OEM 47300-88T)23-028

Chapter 23Chapter 23 is all about frame accessories, windshields,fairings, etc. In this chapter you will find replicas ofthe nostalgic lockable toolbox that was introduced onthe 1940 models, but also the toolbox of today like thenew Pro-Max Stash tubes. If you are looking for acomfortable “out of the wind” ride you also need tolook in this section for National Cycle and other finequality windshields and handlebar fairings. Ourreinforced Motorcycle covers are manufactured fromurethane covered polyester and are great to protectyour bike when you are not riding. Last but not leastthis section contains replacement footrest rubbers andother rubber parts.These chin spoilers or motor spoilersare made from fiberglass by DoubleG BaggersPerformance Machines’speaker bezels for TouringmodelsNational Cycle’s V-Stream WindscreenPro Max Chrome Billet Stash Tubes

WindshieldsNATIONAL CYCLE HAND DEFLECTORSFor the riders who prefer to be on their bike anytime, anywhere, in anytype of weather, we offer National Cycle Hand Deflectors. HandDeflectors are an easy-to-install solution for keeping your hands warmand dry. Coupled with a windshield, hand deflectors protect from thewind and rain. Deflectors are, depending on the application, securedto the control boss by your mirrors or to the turn signal mounts. Theyallow plenty of room for lever movements and for riders with largegloves. These deflectors make a windshield function like a fairing. Alldeflectors are clear acrylic and come with steel mounting hardware.SEVEN SINS BATWING WINDSHIELDWhen you want to give your stock Bat Wing some cooler looks byblending the windshield in with the fairing, this is a great alternative:a fiberglass windshield by Double G Baggers that comes with a whitegel coat finish, ready for painter's preparation. The centered pointdirects the air slightly away from the rider.746949 Fits all Batwing fairings 1996 to present23Fits FLH and FLT series Touring models 1960 topresent, FXSTB NightTrain 2000 to present and FLSTSoftail models 1986 to present (except FLSTFFatBoy and FLSTS Springer)731150 Hand deflectors, 9.75" (24.7cm) wide, 5 3/4" (14.6cm)highFits all Sportster models 1983 thru 2003, FX models1970 thru 1985,, FLSTF FatBoy 1990 to present,FLSTS Softail Springer, Dyna models 1993 topresent (except 2010 and later Dyna Wide Glideand 2008 to present FXDF Dyna FatBob), FXSTSoftail models 1984 to present (except FXSTBNightTrain)731151 Hand deflectors, 9.75" (24.7cm) wide, 5 3/4" (14.6cm)highFits 2008 to present FXDF FatBob, 2010 to presentFXDWG Dyna Wida Glide, 2012 to present FLSSoftail Slim, 2010 to present FLSTFB Fatboy Special,2012 to present FLSTF Fatboy, 2011 to present FXSSoftail Blackline, 2004 thru 2007 FLHRS Road KingCustom731170 Hand deflectors, 9.75" (24.7cm) wide, 4"(10.2cm) highFits 2005 thru 2007 FLSTC Heritage Springer and2012 to present FLD Switchback731171 Hand deflectors, 9.75" (24.7cm) wide, 4"(10.2cm) highFits all Sportster models 2004 to present, includingXR 1200731152 Hand deflectors, 9.75" (24.7cm) wide, 4.38" (11.1cm)highNATIONAL CYCLE DEFLECTOR SCREENThis 15 1/4" (39cm) tall National Cycle windscreen is made from DOTapproved acrylic. Comes with National Cycle's patented and innovativeRake-Adjust hardware which permits 100 degrees of screen adjustmentwithout moving the mounting hardware.A double Ball-socket attachesthe screen to the mounting hardware, providing simple assembly anda safety release. Available as fixed mount that fits both 7/8" and 1"handlebars, as well as with Quick Release mounts for 1 1/4" (32mm)handelbars.710658 Fixed mount clear Deflector screen710659 Fixed mount tinted Deflector screen710720 Quick Release clear Deflector screen710721 Quick Release tinted Deflector screen23-030

Windshield Accessories/FairingsDOUBLE G BAGGERS BATWING STYLE FAIRINGSThese inner and outer Batwing style fairings are made in Holland fromfiberglass in precision build moulds by Double G Baggers.Available asstock replacement inner and outer fairings, as well as a specialdetachable version that fits straight on to all Road King models, exceptFLHRS. Double G Bagger fairings come with a white gel coat finish,ready for your painters' preparation.Stock replacement for 1993 thru 2008 models746935 Outer fairing without screen746936 Inner fairingFits 1993 to present Road King models746937 Outer fairing without screen746938 Inner fairingROAD GLIDE FAIRING & MOUNTSPerfect copies of the stock FLTR Road Glide inner and outer fairing.Made out of fiberglass in precision built moulds by Double G Baggers.The fairings have a white gel coat finish, ready for your painter'spreparation. Glove box doors with mounting hardware for the innerfairing are sold separately. For severe crash damage repairs, or whenyou want to convert your FLHT or FLHR to the Road Glide style we alsohave supports and mounts from Hells Foundry available. Their fairingmounts are adjustable to make them work with both older and laterFLTRs, as well as with other models. Fairings fit all 1998 to present FLTRmodels.746947 Inner fairing (OEM 58735-98D)746946 Outer fairing (OEM 58733-98B)Hells Foundry supports & mounts745568 Internal support bracket, black745569 Internal support bracket, raw745570 Fairing mount, black745571 Fairing mount, rawFAIRING PROTECTIONThe Bike Bumper is a revolution in motorcycle fairing protection ensuringthe highest level in security when transporting motorcycles.Never againyou have to deal with scuffed paint from the dangers of hauling.Providing the ultimate in fairing protection the Bike Bumper adds anextra layer of security to your investment keeping accidents frombecoming costly and frustrating. Double layered padding keeps bikessafe from rocks and road debris, jostling trailer straps, other bikes andequipment and helps maintain your peace of mind while hauling. Extrathick neoprene padding at the outer edges ensures even moreprotection for the most vulnerable parts of the fairing by completelysurrounding the outer edge with soft padding. Finally, highly durabilityelastic straps keep the protector completely secured to the fairing.747619 Fits all Touring models with a Batwing style fairing,except Street Glides and others with fairing-fitted mirrors747620 Fits al FLTR Road Glide models2323-031

FairingsSOFTDASH FORBATWING FAIRINGSHell's Foundry SoftDash is thefirst commercially availablealternative to painting yourinner-fairing. The rich leathertexture of the SoftDash willimmediately improve theappearance and perception of quality to the area you look at mostwhen riding. While SoftDash "Pig Skin" grain looks and feels likeleather, it was created using marine industry materials designed foryears of outdoor use. It will not fade or turn "white" like the stock flatblack finish, nor will it scratch like gloss paint.The SoftDash is availablein Buckskin Tan, Meteor Gray, Carbon Look and Midnight Black tocompliment all H-D color schemes from 1996 to present FLH and1998 to present FLTR models. To further enhance the appearance amatching inner fairing cap is included.ARLEN NESS BATWING WINDSHIELD TRIMBillet aluminum trim that fits the stock Batwing style fairing on all1996 to present Electra Glide and Street Glide models. Installs inminutes with the included chrome mounting hardware.A03691 Deep Cut ChromeA03690 Deep Cut BlackA03695 Beveled ChromeA03694 Beveled BlackA03692 Slot Track ChromeA03693 Slot Track Black23Fits 1996 thru 2007FLH models745532 Buckskin Tan745536 Midnight Black745540 Meteor Gray745544 Carbon LookFits 2008 to presentFLH models745533 Buckskin Tan745537 Midnight Black745541 Meteor Gray745545 Carbon LookFits 2006 thru 2007FLHX models745530 Buckskin Tan745534 Midnight Black745538 Meteor Gray745542 Carbon LookFits 2008 to presentFLHX models745531 Buckskin Tan745535 Midnight Black745539 Meteor Gray745543 Carbon Look23-032

Windshield Accessories/Fairings/Crash/Highway BarsNESS ORIGINAL FAIRING KITSThe fairing that started it all. Universal design can be used on variousapplications. Fairing body constructed in heavy ABS plastic.Windshieldis smoked Plexiglas. Kit includes fairing body, smoked windshield,universal mounting brackets and windshield mounting screws. ArlenNess suggests to use these fairings with A08006 Fatbob draghandlebars. Installation on Narrow Glide front ends is easiest usingA06048 custom headlight brackets. Installation on Wide Glide andinverted front ends require fabrication of custom mounting brackets.HIGHWAY BARS WITH FOOTREST RUBBERSThese heavy gauge highway bars are 1 1/4" (32mm) in diameter andfeature mandrel bends, a show chrome finish and footrest rubbers.087000 Fits all 1986 thru 1999 FLST Softail models087001 Fits all 2000 to present FLST Softail models087002 Fits all 1998 thru 2008 Touring models087003 Fits all 2009 to present Touring models087004 Fits all 2006 to present Dyna models, including FXDWGNote: Please check fit and finish prior to painting. Neither Arlen Nessnor Zodiac will be responsible for any damage sustained to paint jobs.A06041 Plain fairingA06043 Louvered fairingA06087 Plain fairring Custom Wide Glide and Custom Mid-GlideAccessoriesA06048 Custom headlight bracketsReplacement partsA06047 Smoked windscreenA06049 Fastener kitRAINZIP WINDSHIELD TREATMENTTo keep your windshield clear in rainy weather,National Cycle developedRainZip, a specially formulated rain repellent treatment. It is safe touse on your National Cycle Quantum hard coated windshields like theV-Stream,Wave,Switchblade or Heavy Duty.And,it's safe to use on ANYmotorcycle windshield, plus helmet face shields and goggles. RainZipis hydrophobic, so when rain accumulates on your windshield, RainZipwill cause it to effectively bead up and blow away, even at riding speedsof only 20-30MPH (30-40 km/h). RainZip will give you a clearer viewof the road ahead... especially when it's wet! Comes in a 3-oz. (90 cc)bottle with application cloth, which is enough to keep your windshieldrain-free for a long time.735217 RainZip with application clothDOUBLE G BAGGERS CHIN SPOILERSThese chin spoilers or motor spoilers are made in Holland from fiberglassin precision build moulds by Double G Baggers.They are available in ashort and a long version and can be custom fitted to most Harley-Davidson models. The spoilers have a white gel coat finish, ready foryour painters' preparation.746930 Short chin spoiler746934 Long chin spoiler2323-033

Frame AccessoriesSTRETCHED SIDE COVERS FOR TOURING MODELSThese fiberglass stretched side covers are made in Holland in precisionbuild moulds by Double G Baggers.These are true side covers, not theflimsy overlays other manufacturers supply.These covers come with awhite gel coat finish, ready for your painters' preparation. Availablefor 1997 thru 2008 and 2009 to present Touring models. Sold in pairs.Fits 1997 thru 2008 Touring models746923 Fits with stock length hard saddlebags746924 Fits with stretched hard saddlebagsFits 2009 to present Touring models746925 Fits with stock length hard saddlebags746926 Fits with Double G's CVO Style hard saddlebags746950 Double G XXL sidecovers for TouringARLEN NESS DEEP CUT FRAME GRILLSMachined from billet aluminum in the USA.Adds style and takes eyesaway from the unfinished looking areas of the stock frame. Manymatching Deep Cut styled accessories available such as floorboards,grips, latch covers, and more. Frame grills are available in chrome orblack anodized finish and mount to front frame down tubes.Fits 1994 thru 2008 FLH and FLT series TouringmodelsA03652 ChromeA03653 BlackFits 2009 to present FLH and FLT series TouringmodelsA03650 ChromeA03651 Black2323-034