2034CL-L-PBIO, Vs.3.0, 300 Clip Instant Access ... - DNF Controls

9. PBIO REGISTER MAPPING TO SHOTLISTLOCATIONRegister 0-30 Cue Point 0-30Register 31-60 Cue Point 101-130Register 61-90 Cue Point 201-230Register 91-99 Cue Point 301-30910. TRIGGERThe operator fires a trigger using the Timeline or Run function on the production switcher. TheST300 puts the Video Server into the following modes based on the trigger value:GRASS VALLEY GROUPTrigger ValueMode0 Play1 Recue to beginning of clip2 Slo-mo using ST300 Preset Speed3 Reverse Play4 Still Frame5 Play6 Record7 or greater PlaySONYTrigger ValueMode0 Recue to beginning of clipPlay1 Play2 Slo-mo using ST300 Preset Speed3 Reverse Play4 Still Frame5 Play6 Record7 or greater PlayTo control more than one VTR, enable the Peripheral Device Address for the required VTRs. TheTrigger will be sent to the enabled devices.ORGANG the required VTRs on the ST300. See the Menu Table for GANG instructions. Enable thePeripheral Device Address for one of the GANGed VTRs. The Trigger will be sent to the enabledVTR. The other VTRs in the GANG will perform the same action.12 2034CL-L, Vs.3.0, 300 Clip Instant Access System, Louth Protocol, PBIOOption