The Temperature 2 Pressure Probe (T2P): Technical Manual
The Temperature 2 Pressure Probe (T2P): Technical Manual
The Temperature 2 Pressure Probe (T2P): Technical Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Table 2: Source Code ListingName of File/Folder Description Primary ChangesCS5534lib.cSource code for the commands of theAnalog to Digital Converter. <strong>The</strong>Analog to Digital Converter respondsdirectly to 32-bit and 8-bit hexadecimalinputs, and thus this file appearsprimarily as machine language.CS5534lib.h Header file for sharing of variables. NoneIODP1D.APPBuilt program from the original IODPsource code. <strong>The</strong> APP extensioncannot be used with PICO-DOS.NoneIODP1D.RUNBuilt program from the original IODPsource code. <strong>The</strong> RUN extension filesare those to be used with PICO-DOS.New Hexadecimals were added to powerdown the Analog to Digital Converter.NoneIODP_accel.cSource code for the Accelerometerroutines.NoneIODP_accel.h Header file for sharing of variables NoneIODP_Accel.mcpProject File for access to source codesthrough Codewarrior.NoneIODP_Accel.old.mcpRelic project file. Upon codewarrior thiswas renamed to watch the differencesin Codewarrior versions accessed bydifferent users.None<strong>The</strong> timing sequence for sampling wasIODP_ADC.cSource code for the Analog to Digital adjusted to sample on the channels statedRoutines.in this manual. <strong>The</strong> output statement wasadjusted.IODP_ADC.h Header file for sharing variables Several new variables were added.IODP_CalConstant.hHeader file with stored values for use ifuser desires to internally calibrateAnalog to Digital Converters.NoneIODP_Paro.cSource code for Digital <strong>Pressure</strong>Transducer routine.IOD_Paro.h Header file for sharing files None<strong>T2P</strong>LOGGR.cORSLEEP.cMain source code. All other argumentsare called from this code and accessedin their respective codes.No longer appears in the main source codeor sampling routine.Initial output to the screen upon programinitiation was altered and an additionalfunction for the determination of availablememory was added. Two files are createdto store Program Output.GAIN32.cSame as <strong>T2P</strong>LOGGR.c except with Increased gain on Channels 1 & 2 on ADCgain= 32x.2 to 32x.GAIN64.cSame as <strong>T2P</strong>LOGGR.c except with Increased gain on Channels 1 & 2 on ADCgain= 64x.2 to 64x.bin Folder for storing built programs. NoneVersion 1.0 Page 3209/21/2012
Change language