MP55T Easy-Slide Sample Kit - Four Point Probes

MP55T Easy-Slide Magnet / Sample KitThis image shows the sample mountedon a board and installed in the samplelid, but not yet installed into the MP55Tsample kit. The blue arrow is pointing tothe board mounted sample in the lid.The yellow-green arrow is pointing to theLN2 reservoir.The knob (white arrow) has been positionedin the center so that the magnetsare positioned away from the reservoirwhere the sample will be mounted upsidedown into the LN2 reservoir. This isthe starting position for the test, in whichthe magnet is not yet introduced to thesample.The sample normally would be installed,however, to show the magnet position, ithas been left out.Here the knob (see hands pointing)has been moved to the far right position,placing the magnet field in thenorth south orientation.The sample normally would be installed,however, to show the magnet position, ithas been left out.Here the knob (see hands pointing)has been moved to the far left position,placing the magnet field in thesouth north orientation.The sample normally would be installed,however, to show the magnet position, ithas been left out.