LED Profiles - Hansen

LED ProfilesCreating illuminated contoursindoors and outdoorsLED PipeLED Star ProfileLED Mini ProfileLED Facade ProfileMade in Germanywww.hansen-led.com

Light & contoursLED profiles provide attractive lighting right down the line !The hansen LED profiles are very versatile and can be used for a variety of purposes – creating im-pressive illuminated lines and attracting attention. And they can be installed around corners and at angles.All our LED profiles are suitable for both indoor and outdoor use. In addition, they are offer low energy consumption,low maintenance requirements and a long service life.The LED Pipe is an acrylic pipe with a diameter of 38 mm and an integrated LED circuit board. It is the idealsolution for decorative contour lighting applications or for creating light art objects with coloured, homogenouslight – also available as LED Pipe RGB. The LED Pipe is simple to install and safe to handle bothin indoor and outdoor applications. Customized production allows the contour lighting to be perfectlyadapted to local conditions. In addition, the LED technology is highly energy-efficient: With a power consumptionof only 7 watts per metre, the white LED Pipe provides an energy-saving potential of up to 80%compared to conventional fluorescent lamps.The LED Star Profile, equipped with High-Power LEDs and different lenses, is a very powerful solutionparticularly suitable for outdoor installation. As such, it is frequently used for illuminating advertisingspaces, billboards, information and road signs, as roof lighting or illumination for cold storage houses operatingday and night.With the LED Mini Profile we offer a range of very small light profiles ideally suited to create fine white or colouredlight contours. From the effective illumination of stairs, handrails, showcases and furniture to indirectlighting applications, the LED Mini Profile provides an ideal solution for both indoor and outdoor applications.It is available in a variety of new shapes and sizes and with a range of mounting possibilities.The LED Facade Profile has been specially designed for the illumination of building contours. Illuminatedcontours set buildings apart from others and attract attention. This effect can be further enhanced by theuse of coloured light. This formed the basis for the development of our LED Facade Profile.All our products are developed and custom-made in-house.Page 4Page 6Page 8hansenPage 10911LED Pipe LED Star Profile LED Mini Profile LED Facade Profile

LED PipeIdeal for contours lighting applications• Decorative object and room lighting at the same time• Bright LED light in many variations and colours• Safe installation and long lifetimeAcrylic pipeWall thickness: ~1.7 mmMaterial: PMMALEDOutside diameter:ø 38 mmCircuit boardwith LEDsCircuit boardProtective diodeThe hansen LED Pipe consists of a straight acrylicpipe with an outside diameter of 38 mm.This pipe is illuminated by LEDs fitted on the inside.Depending on the installation location, the LEDs areoperated either using 12 V technology for indoor applications(IP 30) or in series connection for out door applications(IP 65).Usually, the coloured acrylic pipes are illuminated usingLEDs of the same colour, i.e. white acrylic pipes with whiteLEDs, green acrylic pipes with green LEDs, etc. Inaddition, white acrylic pipes can be combined withcoloured LEDs to create pastel-coloured light.Acrylic LED light Rating Ratingcolour colour 12 V syst. Series conn.BlueGreenRedYellowAmberWhiteBlueGreenRedWhiteAmberWhite9 W/m9 W/m9 W/m10 W/m9 W/m10 W/m7 W/m7 W/m5 W/m8 W/m5 W/m8 W/mColour temperature of the white LEDs: 6,500 KIdeal for events and a modern home design: Animatedlight effects and various mixed colours can be implementedusing our LED Pipe RGB for indoor applications.Application examples: Exhibition stand Hotel corridor Work of art in New YorkLED PipeArticle no.:5 3702 1905 3701 1905 3703 190Series connection12 volts12 volts RGBMaximum connectable lengthsPower ratingper metre(white light)8.2 W10.2 W12.2 WMax. lengthper circuit6,000 mm4,100 mm4,100 mmMax. individuallength4,000 mm4,000 mm4,000 mmPage 4 · LED Profiles

LED Mini Profile LED Pipe and LED Mini ProfileLED PipeCreative contour lighting• Intense coloured, homogenous lightEnd capin the same colour• Energy-efficient and safe to handle• Suitable for indoor and outdoor applicationsConnectionsat the sideConnectionM 1:1Outside diameterø 38 mmLED circuitboardsFor indoor applicationswith 12 V circuit board,connected in parallelIP 30For outdoor applicationswith insulated circuit board,connected in seriesIP 65The LED Pipe can be mounted on walls using our plasticsnap-in pipe holders or tie mounts.Non-dimmable convertersfor the LED Pipe and LED Mini ProfileThe pipe can be rotated within the fixtures to ensureoptimum visibility of the bright side.Pipe holder for 38 mm pipemade of transparent polycarbonate(UV-resistant)• For series-connected LEDs• Fully embedded (IP 67)• Short- and open-circuit-proof• Constant current• Cable connectionsIP 67Type L x W x H (mm) No. of LEDs LED typeM4screwC25/300 127 x 19 x 22 1 to 75C25/350 185 x 24 x 25 1 to 100C25/990 205 x 30 x 27 1 to 280Pipe holderArticle no. 5 3701 290Tie mounts for 38 mm pipemade of polyurethaneC40/300 127 x 19 x 22 1 to 125C50/300C50/500C50/990185 x 24 x 25205 x 30 x 27260 x 50 x 361 to 751 to 1251 to 1401 to 2101 to 2801 to 430Tie mountArticle no. 5 3701 2914 mmscrew(e.g. SPAX)Tie wireincluded in thescope of supplyC100/150C100/300C100/990185 x 24 x 25205 x 30 x 27260 x 50 x 361 to 401 to 601 to 801 to 12025 to 2801 to 430LED Profiles · Page 5

LED Star ProfileVersatile profile with High-Power LEDsConverters for 500 mAMounting profileMounting bracketInstallation: with mounting profile or bracketThe different mounting options offer many design possibilities.The LED Star Profile can be installed at an angle of 0°, 45° or90°.This allows the angle of radiation of the LEDs to be perfectlyadapted to the surrounding conditions.The LED Star Profile can be supplied with or without lenses.LED Star ProfileProfile end capsCable leadthroughWith lenses120°Angle of radiationwithout lens15° 25° 40°Available lensesIP 65C500/246 LEDs with1.75 W each(CREE LED)C500/5014 LEDs with1.75 W each(CREE LED)C500/120Ddimmable via 0–10 Vcontrol voltage30 LEDs with1.75 W each(CREE LED)C500/200Ddimmable via 0–10 Vcontrol voltage50 LEDs with1.75 W each(CREE LED)Converters for 750 mAC750/3010 LEDs with2.5 W each(CREE LED)C750/85Ddimmable via 0–10 Vcontrol voltage20 LEDs with2.5 W each(CREE LED)C750/140Ddimmable via 0–10 Vcontrol voltage33 LEDs with2.5 W each(CREE LED)dimmabledimmableIP 67IP 67LED Star Profileas oblong 500 mA luminaireMounting accessoriesIP 65Spring steelmounting brackettype 1Mounting profiletype 2LED modules with 10 LEDsrated at 1.75 W eachSpring steelmounting brackettype 2Mounting profiletype 1LED Profiles · Page 7

LED Mini ProfileFine contour lighting• Attractive illumination of furniture and showcases• Indirect lighting, mirror backlightingIP 65• Stairs and handrails20 mm91118.5mm25 mm92825 mm30 mm94040 mm96032.5 mmThe new product family42.5 mmCustomized productionThe hansen LED Mini Profiles consist of extruded aluminium profiles with agrey anodized surface. The profiles are equipped with LEDs along their entirelength. The LEDs are fully embedded making the profiles suitable for outdoorinstallation.The base of the Mini Profileis the same for all types andsuitable for the followingmounting types:Mounting accessoriesApplication example: gallerySpring steelmounting brackettype 1Spring steelmounting brackettype 2Mounting profile(anodized)type 2LED Mini ProfileArticle no.:5 6501 000 Type 55 6505 000 Type 2205 6507 000 Type 9115 6508 000 Type 9285 6509 000 Type 9405 6510 000 Type 9605 5060 034 SpotlightType 5, 220 (series conn.) Stand.+ | PowerType 5, 220 (12 volts)Stand.+ | PowerType 911, 928, 940, 960 (series conn.) StandardType 911, 928, 940, 960 (12 volts)Miniprofil as spotlightStandardStand.+ | PowerMaximum connectable lengthsPower ratingper metre(white light)8.8 W | 11.8 W11 W | 14.8 W7.5 W9.3 W11 W | 14.8 WMax. lengthper circuitMax. individuallength5,600 mm | 8,400 mm 4,000 mm | 4,000 mm4,000 mm | 2,800 mm 4,000 mm | 4,000 mm3,300 mm 3,000 mm4,000 mm 3,000 mm4,000 mm | 2,800 mm 2,000 mm | 2,000 mmPage 8 · LED Profiles

LED Mini ProfileWhite and coloured light linesThe hansen LED Mini Profiles can be used to create fineilluminated lines to set colourful accents or provide visualorientation inside buildings.Design and art objects can be put in the limelight the LED MiniProfiles as well. Installed on building facades, the Mini Profileshelp to emphasize architectural features.IP 65Aluminium Mini Profilewith or without lenses120° Type 560°or30°LensType 22015mm17.7mm9mm21mm5LED spacing:20 mm for Standard-PLUS LEDs30 mm for Power LEDs220For mounting accessoriesfor type 5 and type220 profiles see page 8.15,5mmApplication examples: stairs and handrailsLED Mini Profile asSpotlightAluminium Mini Profilewith Standard-PLUS or Power LEDsTransparentacrylic coverTransparentsealing compoundLED spacing:20 mm for Standard-PLUS LEDs30 mm for Power LEDs15.1mmLEDHeat shrink tubing15.7mmAnodizedaluminium profile15.7 x 15.1 mmThis hansen LED Mini Profile consists of a u-shaped aluminium profile with an acrylic glass cover.It is illuminated by white LEDs embedded in artificial resin.Spring steel mounting bracketsMounting bracket forLED Mini Profile used as spotlight15.1 x 15.7 mm23.517.5LED Profiles · Page 9

LED Facade ProfileContour lighting for buildings and petrol stations• Fine, seamless illuminated lines without any dark zones• Bright LED light with day and night effect• Energy-efficient LED technologyIP 5453 mm2LED TubeVisible profile covermade of white orcoloured acrylic plastic(extruded PMMA)Day and night effectIlluminated lines visually emphasizethe contours of buildings fromdusk right into the night.This attracts attention and makesthe building stand out from others.251 mmProfile basemade of white extrudedABS plasticDuring the day, the colouredprofile covers show their effect ascoloured lines.The hansen LED Facade Profile consists of two plastic parts.The lower part (base) contains all the technical equipment includingLED Tube, converters and cables. The coloured upper part (cover) isuniformly transilluminated by the LEDs.The special design of the profile ensures continuous, shadow-freeilluminated lines with an overall height of the profile of only 53 mm.The pre-assembled elements can be fitted seamlessly next to eachother. A joint sealing tape to seal the expansion joint between thecovers can be supplied as well.Ready for installation:Holding clipsConverterColoured coverProfile baseLED TubeEnd capsavailable in matching coloursLED Facade ProfileArticle no.:5 5001 119 white5 5000 11x colour “x”230 V50 HzMaximum connectable lengthsLED typeMax. individuallength4.4 W/m as illuminated line 150 m per power supply point Standard 4,000 mmPage 10 · LED Profiles

LED Facade ProfileContour lighting for buildings and petrol stations• Fine, seamless illuminated lines without any dark zones• Bright LED light with day and night effect• Energy-efficient LED technologyIP 5453 mm2LED TubeVisible profile covermade of white orcoloured acrylic plastic(extruded PMMA)Day and night effectIlluminated lines visually emphasizethe contours of buildings fromdusk right into the night.This attracts attention and makesthe building stand out from others.251 mmProfile basemade of white extrudedABS plasticDuring the day, the colouredprofile covers show their effect ascoloured lines.The hansen LED Facade Profile consists of two plastic parts.The lower part (base) contains all the technical equipment includingLED Tube, converters and cables. The coloured upper part (cover) isuniformly transilluminated by the LEDs.The special design of the profile ensures continuous, shadow-freeilluminated lines with an overall height of the profile of only 53 mm.The pre-assembled elements can be fitted seamlessly next to eachother. A joint sealing tape to seal the expansion joint between thecovers can be supplied as well.Ready for installation:Holding clipsConverterColoured coverProfile baseLED TubeEnd capsavailable in matching coloursLED Facade ProfileArticle no.:5 5001 119 white5 5000 11x colour “x”230 V50 HzMaximum connectable lengthsLED typeMax. individuallength4.4 W/m as illuminated line 150 m per power supply point Standard 4,000 mmPage 10 · LED Profiles

- seit 1984 -Hansen Neon GmbHNorderstr. 1D - 25855 HaselundGermanyTel.: +49 48 43 - 20 09 - 0Fax: +49 48 43 - 20 09 - 33info@hansen-neon.dewww.hansen-neon.deApril 2013www.hansen-neon.comGlobal Distribution OfficeHansen Neon GmbHMalervej 5DK-6710 EsbjergTel. +45 75 45 - 22 11Fax +45 75 13 - 71 21e-mail: info@hansen-neon.comAustriaHansen OfficeTriester Str. 83A-8073 Feldkirchen / GrazTel. +43 664 - 16 17 663Fax +43 316 - 29 28 44e-mail: info@hansen-neon.at