Metric Catalogue - SEF meccanotecnica

CoatingsALtima ®Aluminum Titanium Nitride (AlTiN). ALtima ® is the originalhigh performance coating. This coating allows tools to berun at higher speeds and feeds in a wide array of materials.Also, it allows the option of running tools dry due to thehigh oxidation temperature of the coating.ALtima ® 52Aluminum Titanium Nitride (AlTiN). ALtima ® 52 is speciallydesigned for milling hardened steels 52 Rc and above.It has very high hardness and the oxidation temperatureof the coating makes this the absolute best choice forhardened steel milling. ALtima ® 52 is designed to allowfor dry machining.ALtima ® BlazeAluminum Cromium Nitride (AlCrN). ALtima ® Blaze isdesigned to allow higher material removal rates. Thiscoating has a higher oxidation temperature than atypical TiAlN coating. It has shown very good resultsin nickel alloys, titanium, and other difficult to machinematerials. Tools coated with ALtima ® Blaze can beused in dry machining.FordlubeTitanium DiBoride (TiB 2) is a unique coating with lowAluminum affinity, smooth surface finish and high hardness.It is ideal for Aluminum and Magnesium alloys as it preventsbuild-up on cutting edge, provides superior chip flow alongwith extended wear resistance.Special CoatingsUpon request, M.A. Ford ® can provide any commerciallyavailable coating. Any standard M.A. Ford ® cutting toolcan be provided with coating if requested.Coating PropertiesMA Ford ®CoatingMA Ford ®Tool NumberDesignationMicrohardness(HV)MaximumService Temp.FrictionCoefficient®ALtima A 3100 1100° C / 2012° F 0.42®ALtima 52 A 3600 1200° C / 2192° F 0.40®ALtima Blaze B 3200 1100° C / 2012° F 0.35Fordlube F 4000 700° C / 1292° F 0.30www.maford.com email: sales@mafordeurope.com Tel:+44(0) 1332 267960 Fax:+44(0) 1332 267969 97