safety compliance testing for fmvss no. 114 theft protection

More documents

Recommendations

Info

10DATA SHEET 3 continuedREQUIREMENT S5.2.4 PASS FAILGEAR SELECTION CONTROL OVERRIDE DEVICEThe vehicle is equipped with an override device that allows the user to movethe gear selection control from “park” after the key has been removed from thestarting system. Yes No XIf yes, select the type of override device that is equipped: Override operatedwith a: Key______ Opaque Cover No Cover______N/ADescribe the override device design and mode of activation (if equipped):Push button release activated by a special wrench supplied in tool kit.FILL IN THE SECTION BELOW THAT APPLIES:OVERRIDE OPERATED WITH KEY:The key is required to operate the override device that allows the user to movethe gear selection control from “park” after the key has been removed from thestarting system.Yes No______N/AOVERRIDE WITH AN OPAQUE COVERThe opaque surface cover prevents sight of and use of override device.Yes No____The opaque surface cover can only be removed by using a screwdriver orother tool. Yes No____N/AAs a direct result of removing the key from the starting system, the following isprevented: Steering or Self-Mobility ____OVERRIDE WITH NO COVERThe override device requires the use of a tool to operate.Yes_____ No______Simultaneous activation of the override device and removal of key from startingsystem is required.Yes_____ No______N/AAs a direct result of removing the key from the starting system, the following isprevented:Steering_______ or Self-Mobility_______REMARKS:
11DATA SHEET 3 continuedVEHICLE FACING UPHILL ON 10% GRADEREQUIREMENTS S5.2.5 PASS FAILWith the gear selection control in Apark@ measure movement of thevehicle down the slope upon releasing the service brake.see <strong>no</strong>teTest grade: 15 % (9% to 15%)Measured movement: 48 mm (150mm maximum)XNOTE: Repeat procedure if vehicle fails on grade in excess of 10%.Test grade: % (9% to 10%)Measured movement:mm (150 mm maximum)VEHICLE FACING DOWNHILL ON 10% GRADEWith the gear selection control in Apark@ measure movement of thevehicle down the slope upon releasing the service brake.Test grade: 15 % (9% to 15%)Measured movement: 40 mm (150mm maximum)XNOTE: Repeat procedure if vehicle fails on grade in excess of 10%.Test grade: % (9% to 10%)Measured movement:mm (150 mm maximum)REMARKS:
Page 1 and 2: REPORT NUMBER 114-GTL-10-009SAFETY
Page 3 and 4: 1. Report No. 2. Government Accessi
Page 5 and 6: 1SECTION 1PURPOSE OF COMPLIANCE TES
Page 7 and 8: 3SECTION 3TEST DATA3.0 TEST RESULTS
Page 9 and 10: 5GEAR SELECTION CONTROLDescribe the
Page 11 and 12: 7FMVSS 114, THEFT PROTECTIONDATA SH
Page 13: 9DATA SHEET 3 continuedELECTRICAL F
Page 17 and 18: 13SECTION 4TEST EQUIPMENT LISTITEM
Page 19 and 20: 2010 LINCOLN MKS FIGURE 5.1NHTSA NO

safety compliance testing for fmvss no. 114 theft protection

Create successful ePaper yourself

Delete template?

Save as template?