Ocean Bed Side Table instructions - Mamas & Papas

Step 5Screw four cam studs (D) into theunderside of the top (7) using a X-headscrewdriver.7DStep 6Slot the top onto the assembled sectionsof the bed side table.Slot four cams (E) into holes along thetops of the side panel. Ensure the arrowson the tops of the cams are facingupwards once fitted.Turn the cams clockwise using thescrewdriver (I).IE6

98Step 7Important: There are two drawerssupplied with the bed side table. Forclarity only one drawer is shown in thediagrams.Attach the two left (8) and right drawersides (9) to the drawer backs (10) usingfour drawer screws (F) and a X-headscrewdriver.Ensure that the grooves in the back andside panels are aligned and the wheelson the drawer side runners are at thedrawer back end.F1011Step 8Slot the drawer bases (11) into thegrooves in the drawer sides.Push the base down until it slots into thegroove in the drawer back.7

13Step 9Screw eight cam studs (D) into the top(12) and bottom (13) drawer frontsusing a X-head screwdriver.12DHStep 10Attach the two handles (G) to thedrawer fronts using four handle screws(H) and a X-head screwdriver.G8

Step 11Slot the top onto the assembled sectionsof the drawers.Slot four cams (E) into holes in theends of the drawer side panel. Ensurethe arrows on the tops of the cams arefacing upwards once fitted.Turn the cams clockwise using the allenkey (I).ICStep 12Slot the wheels on the drawer sidesrunners into the runners on the unitssides.Push the drawer inwards until fullyinserted.9

Step 13The bed side table is now fullyassembled. Check that all of the fittingsare fully tightened before use.10