T2X S80 and S250 â Stationary mounted doser - Teamster AB

More documents

Recommendations

Info

Docking sequenceTechnical specification:Temperature range 20-140 °CAir supply 7 BarConnections Air, Lubrication x 2, Electrical wires,Media hose.Connection media 90 or 135 degrees - 3/4”Lubricated sealings YesMax media pressure 400 BarFilling time 1) 8-16 sMovement top platein X,Y & Z ±3 mmWeight60 kgHeight1040 mmWidth310 mmDepth 2)320 mm1) Time from robot enters the locating pins until the robotleaves the same pins with a filled doser. Doser are emptythen the robot arrives. Filling time may vary dependingof material.2) Plus media inlet.[Specification may change]Teamster ABVingalandsgatan 8SE 41763 Göteborg, SwedenTel +46 31 65 80 00Fax +46 31 65 80 01www.teamster.seT2X Dockning station w514
T2X FC - Flow Control systemThe T2X FC is a user-friendly advanced control system for theentire T2X doser and docking station programme. The T2XFC consists of servo-control, PC-control and the necessaryelectrical components assembled in a small cabinet. The controlsystem is based on full graphics with integrated real-timecontrol. T2X FC is available in several configurations wherenumber of dosers, docking stations, pumps and process datadetermine how the T2X FC is equipped. It is simple to integratethe control system with other production systems whilegetting a tailored expert system featuring both control andmonitoring capabilities.Industrial field buses provide effective communicationTo ensure maximum performance the T2X FC is built with fieldbus and distributed I/O, the internal field bus is Interbus. Communicationwith external controllers such as robots and PLC’sis performed via a very fast gateway that provides communicationwith all kinds of industrial field buses.Real-time control – securing guaranteedresponse timeBy choosing the Venturecom RTX real-time system, wherethe CPU is shared with Windows XP, the T2X FC can expandaccording to requirements. The real-time system has bothhigh levels of performance and technical availability whicheffectively means that the real-time system in the T2X FCwill just continue to run the production even if Windows XPcrashes and stops the graphical interface.Data logging and data analysis facilitates follow-upsand controlThe T2X FC is equipped with log functions for all systemevents, including user interactions and process data. Logexamples include alarm, bead, doser, operator, maintenanceand temperature logs. Special attention has been paid toinformation being accessible both internally at the T2X FC andexternally from other systems. Specially developed softwarefor analysing process data makes information easily understandableand it can be customised to meet the users’ ownrequirements.Fully integrated networking with existing systemsT2X FC has been developed to be fully integrated into ourcustomers’ data networks with the help of OPC, etc. Everyfunction for data exchange, control and monitoring of thecontrol system is done via Ethernet. OPC or the T2X protocolis available as support for the control system and you willalways have access to actual process data irrespective of thelocation of the units.
Page 1 and 2: T2X S80 and S250- Stationary mounte
Page 3 and 4: T2X R80 and R250- Robot mounted dos
Page 5: T2X - Docking stationThe T2X dockin
Page 9 and 10: Options to the T2X doserSpare parts
Page 11 and 12: References within bondingtechnology

T2X S80 and S250 â Stationary mounted doser - Teamster AB

Create successful ePaper yourself

Delete template?

Save as template?

T2X S80 and S250 â Stationary mounted doser - Teamster AB