Proposed Renovation of Former Jacinto Building - Clark Freeport Zone

portion(s) shall not start until clearance to proceed is ordered by theEngineere. Hardware, lighting fixture and other similar items shall be removed orprotected and re-installed after completion of the work.The areas of concrete and metal surfaces applied with paint and relatedcoating materials shall be measured in square meters while the varnishing ofwooden doors and jambs shall be measured per set as desired and accepted tothe satisfaction of the Engineer.PART D – ELECTRICALGeneralAll works shall be done under the direct supervision of an Electrical Engineer andin strict accordance with these specifications and of the methods as prescribed bythe latest edition of the Philippine Electrical Code.All items not specifically mentioned in the specifications as noted on the drawingbut which are obviously necessary to make a complete working installation shall beincluded.CONDUITS, BOXES AND FITTINGSItems 1100 (1) to 1100 (19)DescriptionThis Item shall consist of the furnishing and installation of the complete conduitwork consisting of electrical conduits; conduit boxes such as junction boxes, pullboxes, utility boxes, octagonal and square boxes; conduit fittings such as couplings,locknuts and bushings and other electrical materials needed to complete theconduit roughing – in work of this project.Material RequirementsAll materials shall be brand new and shall be of the approved type meeting all therequirements of the Philippine Electrical Code and bearing the Philippine StandardAgency (PSA) mark.ConduitsConduit shall be standard rigid steel; zinc coated or galvanized, and shall beSchedule 40. Electrical metal conduit may be used if shown or specified on theapproved Plans. PVC conduit if required shall be Schedule 40. Enamel coated steelconduits and conduits with rough inner surfaces are not acceptable.100Clark Development Corporation Proposed Renovation of Former Jacinto Building(Motorpool, Records, Warehouses and Maintenance Area)