a guide to safety in the wood products ... - WorkSafe Victoria

OTHER USEFULGUIDANCE MATERIALThose involved in the wood and wood product industry may also be interestedin publications developed for other industries including:• Occupational Health and Safety Act 2004• Occupational Health and Safety (Hazardous Substances) Regulations• Occupational Health and Safety (Noise) Regulations• Dangerous Goods (Storage and Handling) Regulations• A Guide to Handling Large, Bulky and Awkward Items• A Guide to Manual Order Picking• Manual Handling in the Automotive Industry• Manual Handling in the Sawmilling Industry• Manual Handling in the Textile Industry• Delivering Large Gas Cylinders – A Guide to Manual Handling• A Guide to Preventing Injury from Packing and Unpacking ShippingContainers and Enclosed Trailers• Prevention of Falls in the Transport of Roof Trusses and Wall Frames• WorkSafe Guide for Assessing and Fixing Noise Problems at Work• WorkSafe Guidance Note on Respiratory protective devices• WorkSafe Guidance Note: Spraying flammable liquids – paints, lacquers,adhesives, resins• WorkSafe Guidance Note: Wood Dust – Health hazards and control• Australian Standard AS 4024.1201 – 2006, Safety of Machinery• Australian Standard AS 1473 – 1991, Guarding and safe use ofwoodworking machinery• Australian Standard AS 1473.5 – 2001, Wood processing machinery – Safety– Finishing machinery – Moulding machines and routers with rotating tool• Australian Standard AS 1473.7 – 2005, Wood processing machinery – Safety– Finishing machinery – Tenoning, profiling and edge-banding machines• Australian Standard AS 1473.6 – 2005, Wood processing machinery – Safety– Finishing machinery – Surface planning and thicknessing machines• Australian Standard AS 1473.1 – 2000, Wood processing machinery– Primary timber milling machinery• Australian Standard AS 1473.4 – 2001, Wood processing machinery – Safety– Finishing machinery – Bandsawing machines• Australian Standard AS 1473.4 – 2001, Wood processing machinery – Safety– Finishing machinery – Circular sawing machines• Australian Standard AS 1473.2 – 2001, Wood processing machinery – Safety– Finishing machinery – Common requirements• Australian Standard AS 1715 – Selection, use and maintenance of respiratoryprotective devices• Australian Standard AS 4114 – Spray Painting Booth• Australian Standard AS 1716 – Respiratory protective devicesWORKSAFE VICTORIA / A GUIDE TO SAFETY IN THE WOOD PRODUCTS MANUFACTURING INDUSTRY 41