SAM4s SPS-300 Series Operators Manual.pdf

5. If IRC is SELECT, then the register selection displays:X REPORT OPTIONSRPT# :FINANCIAL1. TYPE 00:DAILY 1:PERIOD2. 0:PRINT 1:DISPLAY 03. IRC 20:STANDALONE# 1Y2N 3N 4N 5N 6N 7N 8N6. Press the YES/NO key at each register # to select whether you wish to includeeach register in the consolidated report. Press CASH after each selection. Afterthe last selection, the report will start.FieldTYPEIRCDescriptionSelect X1 or X2 if available for the selected report.Select STANDALONE, ALL, or SELECT if availablefor the selected report. If SELECT, the screen willprompt for selection of registers - the screen willinitially show the registers available from the from/toIRC register programming, for example if the IRCrange is from 1 to 3, then the selection will default to:1 2 3 4 5 6 7 8Y Y Y N N N N NOUTPUTSelect PRINT or DISPLAY output.96 • Management Functions SAM4s SPS-300 Operator's & Programming Manual v1.2