SAM4s SPS-300 Series Operators Manual.pdf

Not Found PLUNote: The System Option “DISABLE NOT FOUND PLU” must be set to N(o) to allowthis function.The “Not Found PLU” feature is available for use when an optional scanner is used to inputPLUs. If an item is scanned that is not programmed in the PLU file, the operator has theoption to input the price of the item and assign it the same descriptor and properties ofanother PLU, or enter the descriptor and tax status independently. This provides a simplemechanism for quickly building an item file for a simple scanning installation.Quick Entry Method1. Scan an item or input a PLU number. If the item is in the PLU file, it willregister, if an item is not in the PLU file, the NOT FOUND PLU screen willdisplay:NOT FOUND PLU PROGRAM ?0 : NO 1 : YES2. Press the numeric “1” key to allow the registration of the PLU. The cursor willpoint at the SELECT COPY PLU field.NOT FOUND PLU PROGRAM ?SELECT COPY PLU0PRICE: 03. The not found PLU will assume the same attributes of the PLU selected here.For example, if the item scanned is a “liquor” item, then press another PLU in theliquor category, or press a PLU designated to accept open liquor entries.Press a PLU on the keyboard, or enter a PLU number and press the PLU key.The cursor will advance to the price field.4. Enter the PLU price and press CASH. The PLU will register using the descriptorand tax status of the copied PLU.SAM4s SPS-300 Operator's & Programming Manual v1.2 Operations • 89