SAM4s SPS-300 Series Operators Manual.pdf

Currency ConversionIf you normally accept currency from neighboring nations, you can program the SPS-300 toconvert the subtotal of a sale to the equivalent cost in the foreign currency. You can set up tofour separate conversion functions for different foreign currencies. To do this, you need toprogram the conversion factor. For example, if the US dollar (home currency) is worth1.3720 Canadian dollars (foreign currency), the conversion factor is 1.3720. See "FunctionKey Programming" in the "Program Mode Programming" chapter to set a conversion factor.Note: When a function is located on a function look up menu key, you access thefunction by pressing the appropriate function look up key, then pressing the numericdigit corresponding to the function you wish to select. On the default keyboard, theCONV1 function is function #7 on the function look up 1 menu, so to use the CONV1function, you would first press FUNCTION LOOK#1, then press the numeric 7 key.1. Register the items you wish to sell.2. Press the CONV1 key if it is located onthe keyboard:THANK-YOUCALL AGAINDATE 06/05/2011 SUN TIME 08:33CONV1or, if the conversion is located on afunction look up key press FUNCTIONLOOK2, then press the digitrepresenting the CONV1 function:FUNCLOOK#273. The amount due in foreign currency isdisplayed.4. Enter the amount of the foreign currencytender, Press CASH:PLU1 T1 $2.00TAX1 $0.12TOTAL $2.12CONV 1 ¥2.90CHANGE RATE@1.3720HOME AMT. $10.00CHANGE $5.17CLERK 1 No.000011 00001The currency symbol youprogram will display here. See"Print Option Programming" inthe "Program ModeProgramming" chapter.1 00 0CASH5. The display will indicate the amount offoreign currency tendered and display$5.17 change due. The change due iscomputed in home currency!70 • Operations SAM4s SPS-300 Operator's & Programming Manual v1.2