SAM4s SPS-300 Series Operators Manual.pdf

Food Stamp SalesThe SPS-300 is capable of sorting food stamp and non-food stamp eligible items. If acustomer chooses to pay by food stamps, the eligible total can be subtotaled and food stamppayments accepted. NOTE: Although integrated electronic payments can be deployed forcredit, debit and gift transactions, integrated EBT transactions cannot be processed by theSPS-300 at this time. Consult with your CRS representative for more information.If you choose to use this feature, you must:Locate the appropriate function keys on the keyboard, F/S SHIFT, F/S SUB,and F/S TEND, and then set the appropriate options for the F/S TEND key. Determine and set the food stamp status for each PLU item or category.Refer to the "Service Mode Programming" and the "Program Mode Programming" chaptersto make the appropriate settings.1. Register the items you wish to sell. Youdo not need to sort food stamp eligible ornon-eligible items. The SPS-300 willmaintain a subtotal of eligible itemsbased upon the pre-programmed statusfor each PLU.If you wish to register a normally foodstamp eligible item into a PLUprogrammed as non-food stamp eligible,press the F/S SHIFT key beforeregistering the item. In the same manner,you can register non-food stamp itemsinto food stamp eligible PLUs.2. If a customer wishes to pay with foodstamps, press the F/S SUB key to displaythe food stamp eligible total:THANK-YOUCALL AGAINDATE 06/05/2011 SUN TIME 08:33PLU1 F $1.29PLU2 $4.29TOTAL $5.58F/S TOTAL $1.29F/S TEND $20.00F/S CRT AMT $0.71TOTAL $3.58CASH $5.00CHANGE $1.42F/S/ CHANGE $18.00CLERK 1 No.000011 00001F/S SUB3. Enter the amount of food stampstendered by the customer. For example,for $20.00 enter:2 0 0 0 F/STEND4. The remaining amount due displays.(Note, depending upon programming,change less than $1 can be applied to thebalance.)5. Total or tender the remaining balance.SAM4s SPS-300 Operator's & Programming Manual v1.2 Operations • 69