SAM4s SPS-300 Series Operators Manual.pdf

Item RegistrationsAll registrations are accumulated into PLUs. Keyboard PLUs are fixed keys on the keyboard(like traditional department keys) that access specific PLUs.Depending upon the specific model and the program installed, there will bedifferent number of keyboard PLU keys. Flat keyboard models (SPS-320 andSPS-340) provide 100 PLUs on the default keyboard. The raised key model(SPS-345) provides 21 PLUs keys in the standard configuration. This can beexpanded by your dealer to 63 PLUs. Your specific program may have a more orless PLU keys depending upon how key locations are set.Traditional code-entry PLUs can also be registered by entering the PLU numberand pressing the PLU key.If optional scanning is implemented, the PLU number corresponds to the UPCnumber and a PLU is registered when an item is scanned.As you make item registrations, you can follow your entries by viewing the display.Remember that the sale and tax totals are updated automatically with each entry.Using Function Look-Up KeysBecause the SPS-300 keyboard is programmable, both the selection and location of functionkeys may vary from one register to another.You must pay particular attention to the two function look-up keys, FUNCTION LOOK-UP#1 and FUNCTION LOOK-UP #2. Each of these keys can contain a list of up to 8functions that can be used as if they were located on separate keys. For example: If a function, such as CHARGE1, is located on a function look-up key, as it is onthe default keyboard, then you must access it by pressing the appropriate functionlook-up key, then pressing the digit that represents the function, instead ofpressing a key on the keyboard.If you need to make a numeric entry before a function that is located on afunction look-up key, first press the numeric key or keys, then press the functionlook-up key and press the digit that represents the function you wish to select.SAM4s SPS-300 Operator's & Programming Manual v1.2 Operations • 41