SAM4s SPS-300 Series Operators Manual.pdf

4. Continue to enter keystrokes until the macro is complete. Press CLEAR to endthe macro recording and return to the MACRO PROGRAM screen. If you wishto add a function to a macro that is not located on the keyboard, or if you wish toinclude the CLEAR, Y/N, PAGE UP, or PAGE DOWN function to a macrostring (these keys are used for editing purposes inside this program), press PAGEDOWN to display a key code list:FUNCTIONKEYCODE-------------------------------NLU#1 - NLU#150(1-150)ONE 301TWO 302THREE 303FOUR 304FIVE 3055. With the key code list displayed, press PAGE DOWN and PAGE UP to find thefunction you wish to add to the macro. Type the numeric code number pressCASH. The function is added to the macro.Editing an Existing Macro1. After selecting a macro to program the screen displays the keystrokes currentlyprogrammed.1. ONE 2. TWO3. THREE4. FOUR5.6.7.8.2. Press the YES/NO key to advance the cursor to the line you wish to edit.3. With the cursor pointing at a line, press (or select) the new function you wish toplace in the macro sequence.4. If you wish to remove a key stroke from a macro, replace the current functionwith the INACTIVE function by pressing the PAGE DOWN to display a keycode list, then enter4 4 5.242 • Program Mode Programming SAM4s SPS-300 Operator's & Programming Manual v1.2