SAM4s SPS-300 Series Operators Manual.pdf

DataTranWhen a DataTran integrated payment appliance is connected, you can print a message of upto four lines on the electronic payment draft receipt.1. From the LOGO DESC. PROGRAM screen, press 6 to display theDATATRAN MESSAGE screen:DATATRAN MESSAGELINE 1 :LINE 2 :LINE 3 :2. Using the alpha numeric keyboard overlay (SPS-320/SPS-340, type thedescriptor. For the SPS-345 use the descriptor code method (see page 117.)Each line can contain up to 32 characters. If you make a mistake, press theBACKSPACE key (on the alpha overlay or enter the backspace code 97 if youare using the descriptor code method) to erase the previous character. After youhave completed typing the first line, press CASH to accept the new message andadvance to the next line, or press CLEAR to return to the LOGO DESC.PROGRAM screen without making any changes.3. Press CASH repeatedly, or press PAGE UP and/or PAGE DOWN to locate thenext line of the message you wish to program. After the last line on the firstpage, the screen shifts to display line #4 of the message. Using the sameprocedure, continue programming each line as necessary. Press CLEAR at anytime to exit and return to the LOGO DESC. PROGRAM screen.230 • Program Mode Programming SAM4s SPS-300 Operator's & Programming Manual v1.2