SAM4s SPS-300 Series Operators Manual.pdf

Endorsement MessageThe Endorsement Message is a programming message of up to ten lines of 32 characters thatprints when a check is endorsed on an optional slip printer.1. From the LOGO DESC. PROGRAM screen, press 2 to display theENDORSEMENT MESG. Screen:ENDORSEMENT MESSAGELINE 1 :LINE 2 :LINE 3 :2. Using the alpha numeric keyboard overlay (SPS-320/SPS-340, type thedescriptor. For the SPS-345 use the descriptor code method (see page 117.)Each line can be up to 32 characters. If you make a mistake, press theBACKSPACE key (on the alpha overlay or enter the backspace code 97 if youare using the descriptor code method) to erase the previous character. After youhave completed typing the first line, press CASH to accept the new message andadvance to the second line, or press CLEAR to return to the LOGO DESC.PROGRAM screen without making any changes.3. Using the same procedure, continue programming each line as necessary. PressCLEAR at any time to exit. After programming the third line, the next threelines display:ENDORSEMENT MESSAGELINE 4 :LINE 5 :LINE 6 :4. Continue programming all ten lines if necessary. When the last line has beenentered, press CASH to accept the message and return to the LOGO DESC.PROGRAM screen.226 • Program Mode Programming SAM4s SPS-300 Operator's & Programming Manual v1.2