SAM4s SPS-300 Series Operators Manual.pdf

3. Using the same procedure, continue programming each line as necessary. PressCLEAR at any time to exit. After programming the third line, the fourth, fifth,and sixth lines display:LINE 4 :LINE 5 :LINE 6 :PREAMBLEPostamble4. When the last line has been entered, press CASH to accept the line and return tothe LOGO DESC. PROGRAM screen.The postamble is a programming message of up to six lines of 32 characters that appears atthe bottom of each receipt and/or guest check.1. From the LOGO DESC. PROGRAM screen, press 0 to display thePOSTAMBLE screen:LINE 1 :LINE 2 :LINE 3 :POSTAMBLE2. Using the alpha numeric keyboard overlay (SPS-320/SPS-340, type thedescriptor. For the SPS-345 use the descriptor code method (see page 117.)Each line can be up to 32 characters. If you make a mistake, press theBACKSPACE key (on the alpha overlay or enter the backspace code 97 if youare using the descriptor code method) to erase the previous character. After youhave completed typing the first line, press CASH to accept the new line andadvance to the second line, or press CLEAR to return to the LOGO DESC.PROGRAM screen without making any changes.224 • Program Mode Programming SAM4s SPS-300 Operator's & Programming Manual v1.2