SAM4s SPS-300 Series Operators Manual.pdf

MODIFIER 1-5 Key Program NotesOption Entry DescriptionDESC AlphaUNDER MGRCONTROLnumeric12 characterY or NYou can program a unique descriptor. The default descriptorsare MOD1 - MOD5.Select Y if you do not want the operator use this function inREGISTER mode. When selected, the function is allowedonly in the X control lock position.AFFECT PLU # Y or N Select Y, if you wish the modifier entry to modify the PLUand cause a different item/price to be registered. Select N toonly add the modifier descriptor.PRINT ON CHECK Y or N Select N to suppress printing of the modifier descriptor on theguest check.PRINT ONRECEIPTAFFECT DIGIT 1-14VALUE OFAFFECTED DIGIT(0-9)SENDDESCRIPTION TOKPY or N Select N to suppress printing of the modifier descriptor on thereceipt.1-14 Preceding a PLU with a Size and/or Modifier key manipulatesthe PLU code assigned to the PLU key, causing a differentPLU to be registered when the PLU key is pressed. Enter thedigit of the PLU number you wish to be changed when usingthis key. (Digit #1 is the rightmost digit; digit #14 is theleftmost digit.)0-9 Enter the value you wish to be added in the digit positionselected. For example, if you wish to affect PLU digit #4with a value of 1, then pressing this modifier key prior to theregistration of PLU #17 will result in the registration of PLU#1017.Y or N Determines whether the modifier descriptor prints with theitem at the KP. (The modifier descriptor will printimmediately above the item.)SAM4s SPS-300 Operator's & Programming Manual v1.2 Program Mode Programming • 207