SAM4s SPS-300 Series Operators Manual.pdf

CHARGE 1-8 Key Program NotesOption Entry DescriptionDESC AlphaHALO 7AMOUNT TENDCOMP.OVER/UNDERTENDER IN MGRCONTROLDISABLE UNDERTEND.DOES DRAWEROPENALLOW OVERTEND.NON-ADD #COMP.EXEMPT TAX 1EXEMPT TAX 2EXEMPT TAX 3EXEMPT TAX 4COMPULSORYVALIDATIONnumeric12 characterdigitamountY or NY or NY or NY or NY or NY or NY or NY or NYou can program a unique descriptor. The defaultdescriptors are CHARGE 1-8.You can limit errors by setting the maximum amount that canbe tendered. "0" means that there is no entry limit.Select Y if you want to force the operator to enter thetendered amount and let the register calculate the change.Select Y if you do not want the operator to tender more thanthe amount of the sale and issue change. When selected,over tendering is allowed only in the X control lock position.Select Y if you do not want the operator to tender less thanthe amount of the sale.Select N if you do not want the drawer to opened with thiskey.Select Y if you wish to allow tender greater than the amountof the sale.Select Y if you wish to enforce the entry of a non-addnumber prior to tendering.Select Y to exempt the appropriate tax automatically whenfinalized with this key.Choose Y to enforce validation if an optional printer withvalidation capability is connected to an RS-232C port.CONNECT EFT Y or N Select Y if the DataTran is connected.SELECT(1:CREDIT2:DEBIT, 3:GIFT,4: GIFT NSF)1, 2, 3, 4 Gift NSF indicates that a Gift card with a value less than theamount of the sale will be accepted as an under tender.(Applies to DataTran operations only.)SAM4s SPS-300 Operator's & Programming Manual v1.2 Program Mode Programming • 189