SAM4s SPS-300 Series Operators Manual.pdf

System Option ProgrammingThe 1st SystemOption screen.PressPAGE DOWNto view the 2 ndSystem Optionscreen.PressPAGE DOWNto view the 3 rdSystem Optionscreen.1. At the PGM control lock position menu, press 3 for SYSTEM OPTIONProgramming. The SYSTEM OPTION pg 1 screen displays:2. Refer to “System Options - Reference Information" on page 164 to make programentries or changes, press the CASH key to finalize.SYSTEM OPTION P1BEEPER ACTIVEYRESERVEDCLERK ENTRY 00:PUSH 1:CODECLERK ASSIGNED WHEN CLERK KEY ISPUSHED (1-00) 1SYSTEM OPTIONCLERK IS Y:POP-UPN:STAY-DOWNDRAWER NEEDS TO BE SHUT TOOPERATEACTIVATE OPEN DRAWER ALARMP2NSYSTEM OPTION P3SECONDS TO ALLOW DRAWER OPEN 30(0-99)ALLOW POST TENDERNOPEN DRAWER ON POST TENDERYALLOW MULTIPLE RECEIPTNYNPress ENTERafter making achange, or pressENTER toadvance thearrow to the nextoption withoutmaking achange.Press PAGE UPto return to theprevious screen.NOTE:Be sure to pressENTER afterchanging aselection. If youdo not pressENTER, thechange will notbe accepted.PressPAGE DOWNto view the 4 thSystem Optionscreen.SYSTEM OPTION P4CASH DECLARATION REQBEFORE REPORTSMGR CONTROL TO TEND.NEGATIVE BALANCENZERO BALANCENRESET TRANSACTION NO.ON Z RPT NNPress YES/NOto toggle from'Y' to 'N' for yesor no decisions.160 • Program Mode Programming SAM4s SPS-300 Operator's & Programming Manual v1.2