SAM4s SPS-300 Series Operators Manual.pdf

3. Press PAGE DOWN to view the second page of group programming:GROUP #1 PROGRAMMINGRESERVEDRESERVEDRESERVEDGIFT CARD(1-2)1:ACTIVATE 2:ADDAGE VERIFICATION (0-5) 004. Refer to the table below to fill the fields of the GROUP PROGRAMMINGscreens.5. Press CASH to return to the GROUP PROGRAMMING screen. Continue toprogram groups as necessary. Press CLEAR to return to the PROGRAMMODE screen.Group Programming - Reference InformationOption Entry DescriptionDESC Alphanumeric12 characterYou can program a descriptor for each group. Type thedescriptor using the Program Overlay or by using thedescriptor code method (see page 117.). The overlay isautomatically activated when the cursor is pointing atthe DESC field. The default descriptors are GROUP 1,GROUP 2, etc.ADD TO GROUP TOTAL Y or N Select N if you do not wish this groups total to beadded to the total of all groups on the Group report.SEND TO KP Y or N Select Y if you wish to send PLUs reporting to thisgroup to a kitchen printer.KP PORT # Y or N For SAT: Select Y or N to direct items to the deviceattached to port 1-4 of the server register. Use the Roption (Y or N) to print a kitchen requisition at theregister.For SER: Select Y or N to direct items to the deviceattached to port 1-4 of a satellite register. (You mustset the register number where the KP is attached at IRCprogramming, see page 121.) Use the R option (Y orN) to print a kitchen requisition at the register.PRINT RED ON KP Y or N Select Y if you wish items reporting to this group toprint in red on the kitchen printer. (Note, the kitchenprinter must have red/black printing capability, and thisoption does not apply to the register receipt printer.)SAM4s SPS-300 Operator's & Programming Manual v1.2 Program Mode Programming • 151