SAM4s SPS-300 Series Operators Manual.pdf

uttons.8. Click SEL. find the folder where the update files are located and selectSPS300.bin.9. Select Boot Area Only in the Select One option buttons.10. Press OK Button. The download takes about 30 seconds; the scroll bar willtrack the progress of the download. At the ECR, the display will flash slowlywhile the update is taking place.11. When complete, the message Completed displays on the PC. Click OK andthe Download program will close. At the ECR, the display will change to agreen color indicating the update is complete. Turn the power switch to theOFF.Update Program Area1. Connect the Serial Cable From ECR to PC.2. At the register, turn the control lock to the S position.3. Turn the power switch to the OFF position.4. Press and hold the CASH and CLERK keys. (Use the keys in their defaultlocations, the upper-right and lower-right keys on the keyboard.)5. While continuing to hold the CASH and CLERK keys, turn the powerswitch to the ON position. (The display will illuminate and the error tonewill sound beep-beep-beep in quick succession.) Release the keys.6. At the PC, execute the program “Download.exe”. The Download dialog boxdisplays.7. Select the appropriate com port connection at your PC at the PORT# optionbuttons.8. Click SEL. find the folder where the update files are located and selectSPS300.bin.9. Select Program code + Font in the Select One option buttons.SAM4s SPS-300 Operator's & Programming Manual v1.2 S-Mode Programming • 135