SAM4s SPS-300 Series Operators Manual.pdf

apid beep-beep-beep will be heard again the display will stop flashing anddisplay a green color to confirm update completion.14. Power the register OFF. The FLASH ROM update is complete.15. Remove the SD card from the register.16. Perform a memory all clear on the ECR. The ECR is now ready to program or toload a previously saved end-user program.Flash ROM Update by PC UtilityUpdate FilesTo complete the firmware update, you will be supplied with the following files:NEWNET_DOWN.exe (The update utility program)SPS300.binPC Connection CableYOU MUST USE Port #1. Use the following cable:CRS Part # 522120 (Register DB-9MF COM 1 to PC DB-9F)Update Boot Area1. Connect the Serial Cable From ECR to PC.2. At the register, turn the control lock to the S position.3. Turn the power switch to the OFF position.4. Press and hold the CASH and CLERK keys. (Use the keys in their defaultlocations, the upper-right and lower-right keys on the keyboard.)5. While continuing to hold the CASH and CLERK keys, turn the powerswitch to the ON position. (The display will illuminate and the error tonewill sound beep-beep-beep in quick succession.) Release the keys.6. At the PC, execute the program “NEWNET_DOWN.exe”. The Downloaddialog box displays.7. Select the appropriate com port connection at your PC at the PORT# option134 • S-Mode Programming SAM4s SPS-300 Operator's & Programming Manual v1.2