SAM4s SPS-300 Series Operators Manual.pdf

RS232C Settings Screen Program NotesOptionDescriptionBAUD RATE Select 9600, 1200, 2400, 4800, 9600, 19200, 38,400,57,600, or 115,200 from the pop-up window; 9600 isdefault.PARITYSelect NONE, EVEN, or ODD from the pop-upwindow; NONE is default.DATA BITSSelect 8 or 7 from the pop-up window; 8 is default.STOP BITSDEVICE FUNCTIONSelect 1 or 2 from the pop-up window; 1 is default.Enter the code number for the device you wish toattach to this port from the code numbers displayed.The device function codes are:PRINT LINE ON GUESTCHECK (0-50)SCALE TYPEPRINTER TYPEPOLE DISPLAY TYPERS232C RETRY TIMES1: PC Communications2: Scale3: Remote Journal Printer4: Remote Printer5: Liquor6: Scanner7: Coin Dispenser8: Reserved9: Remote Pole Display10: EFT (i.e.DataTran)11: PDCEnter the number of lines that represent the maximumthat can be printed on a single guest check.Select the digit that represents the scale type connectedto this port.Select the digit that represents the printer typeconnected to this port.Select the digit that represents the pole display typeconnected to this port.Set the number of retries for RS232C communication(about 0.5 seconds each.)SAM4s SPS-300 Operator's & Programming Manual v1.2 S-Mode Programming • 125