SAM4s SPS-300 Series Operators Manual.pdf

2. The total available memory is displayed on the first line of the screen (TTLAVAIL). The total memory currently allocated is displayed on the second line ofthe screen (TTL USED). The TTL USED field is updated when you complete achange and press CASH.Starting at the PLUs field, enter the quantity of each memory field. Press CASHafter each entry, and the cursor will move to the next field. Page 2 of MemoryAllocation will display after the # OF GROUP TOTALS field is set:MEMORY ALLOCATIONTTL AVAIL : 1855488TTL USED : 314865# EJ LINES 1000# CHECKS 10Y=HARD/N=SOFT CHKN# LINES/SFT CHK 503. Continue filling each field until complete. Press CASH after setting the lastfield, "# LINES/SOFT CH". The screen will display "ARE YOU SURE ?". N(No) will display as the default answer to the question. If you wish to implementthe new allocation you have entered, press the YES/NO key, and then pressCASH.4. The message "PLEASE WAIT . . . . " displays until the printer prints either:"MEMORY ALLOCATION OK !" or "MEMORY ALLOCATION SIZE OVER"if you attempt to allocate features requiring more memory than is available.5. The SERVICE MODE menu screen displays when memory allocationprogramming is completed.SAM4s SPS-300 Operator's & Programming Manual v1.2 S-Mode Programming • 117