SAM4s SPS-300 Series Operators Manual.pdf

3. When a report is selected, the Z REPORT OPTIONS screen displays:Z REPORT OPTIONSRPT# :FINANCIAL1. TYPE 00:DAILY 1:PERIOD2. 0:PRINT 03. IRC 00:STANDALONE1:ALL 2:SELECT4. Select the TYPE (DAILY or PERIOD and the IRC configuration. Refer to theexplanations in the table below. Press CASH after each selection. After the lastselection, the report will start.5. If IRC is SELECT, then the register selection displays:Z REPORT OPTIONSRPT# :FINANCIAL1. TYPE : 00:DAILY 1:PERIOD2. 0:PRINT 03. IRC 20:STANDALONE# 1Y2N 3N 4N 5N 6N 7N 8N6. Press the YES/NO key at each register # to select whether you wish to includeeach register in the consolidated report. Press CASH after each selection. Afterthe last selection, the report will start.FieldTYPEIRCDescriptionSelect Z1 or Z2 if available for the selected report.Select STANDALONE, ALL, or SELECT if availablefor the selected report. If SELECT, the screen promptsfor selection of registers - the screen will initially showthe registers available from the from/to IRC registerprogramming, for example if the IRC range is from 1to 3, then the selection will default to:1Y 2N 3N 4N 5N 6N 7N 8NSAM4s SPS-300 Operator's & Programming Manual v1.2 Z Mode • 105