LCD HDTV with Built-in DVD Player Operating Guide for L26D103
LCD HDTV with Built-in DVD Player Operating Guide for L26D103 LCD HDTV with Built-in DVD Player Operating Guide for L26D103
36Problems and troubleshootingUse the following check list for troubleshooting when you have problems with your TV/DVD. Consult your localdealer or service outlet if problems persist.Be sure all connections are properly made when using with other units.POWERSYMPTOMS POSSIBLE SOLUTIONS PAGETV/DVD does not operate.TV BROADCAST RECEPTIONPoor sound or no sound.Poor picture or no picture.Poor reception on somechannels.Poor color or no color.Picture wobbles or drifts.No Cable TV reception.Horizontal or diagonal bars onscreen.No reception above channel 13.TV shuts off.Closed - Caption is not activated.Display is not shown in yourlanguage.PCThe image on the screen ismoving in an oblique direction.The coarse vertical stripes canbe seen in full-display mode.Part of the image is missing.The horizontal stripes are movingvertically with flickering screen.When the characters aredisplayed on the whole screen,the vertical stripes appear andsome of the characters areblurred.••••••••••••••••••••••••••••••••Make sure the power cord is plugged in.Power is off, check fuse or circuit breaker.Unplug unit, then plug it back in.Station or Cable TV experiencing problems, tune to another station.Check Volume adjustments or muting.Check for sources of possible interference.Station or Cable TV experiencing problems, tune to another station.Check antenna or Cable TV connections, reorient antenna.Check for sources of possible interference.Check picture control adjustments.Station or Cable TV experiencing problems, tune to another station.Station signal is weak, reorient antenna to receive stronger station.Check for sources of possible interference.Station or Cable TV experiencing problems, tune to another station.Make sure channels are set into memory.Check picture control adjustments.Check antenna or Cable TV connections, reorient antenna.Check for sources of possible interference.Station or Cable TV experiencing problems, tune to another station.Make sure channels are set into memory.Cable TV company is scrambling signal.Check antenna orientation.Check all Cable TV connections.Set Signal Type option to the “Cable” mode.Station or Cable TV system problems, try another station.Check antenna connections, reorient antenna.Check for sources of possible interference.Make sure Signal Type option is in the appropriate mode.If using antenna, check UHF antenna connections.No broadcast on station tuned.Sleep Timer is set.Power interrupted.TV station experiencing problems or program tuned is not closed captioned. Tryanother channel.Check Cable TV connection or VHF/UHF antenna, reposition or rotate antenna.Set Closed caption in the menu.•••131616, 17351614, 15351816143516161814, 15351616–14151616143516141617–1614, 15• Select proper language in the menu options.18• Check “Clock” and “Phase”.18• Check “Clock”.18• Check “Auto Adjust”.18• Check the signal status of the PC.–••Check “Auto Adjust”.If the display condition is not improved with “Auto Adjust”, check “Clock”.• The LCD panel is a very high technology product, giving you fine picture details. Occasionally, a few non-active pixels may appear onthe screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.2218
Problems and troubleshooting(continued)SYMPTOMS POSSIBLE SOLUTIONS PAGEPCWhen the letter string is• Check “Auto Adjust”.displayed in full-screen, all of• If the condition is not improved with “Auto Adjust”, check “Phase” until you get the 18the characters on the screen areclearest image.blurred.When small patterns aredisplayed on the screen, theentire screen is flickering.Image cannot be displayed in thecorrect position.DVDPlayback doesn’t start.No picture.No sound.Picture is distorted during CUE orREVIEW.Stopping playback, search,slow-motion play, repeat play,or program play, etc. cannot beperformed.No on-screen display.No surround sound.The unit or remote operation keyis not functioning.Playback does not start when thetitle is selected.Audio soundtrack and/or subtitlelanguage is not changed whenyou play back a DVD.No subtitle.• Check “Auto Adjust”.• If the condition is not improved with “Auto Adjust”, check “Phase” until you get a 18flicker-free display.• Check the signal status of the PC.–•••No disc is inserted.The disc may be dirty. Clean up the disc.The unit cannot play CD-ROMs, etc.• TV/DVD selector is not set correctly.23•••Check the input selector of the amplifier is set properly.The unit is in the Special playback mode.Select the correct Audio Output position on AV amplifier.• The picture will be distorted occasionally.–• Some discs may not allow some functions.–• Select Display On.29• The setup does not match your stereo system.34• Turn off the unit and unplug the AC power cord for several minutes, then replug it. 13• Check the Parental setup.30• Multilingual language is not recorded on the DVD disc.27, 28••Some discs have no subtitles.Subtitles are cleared. Press SUBTITLE.Angle cannot be changed. • Multi-angles are not recorded on the DVD disc.28“ ” appears on the screen. • The function is prohibited with the unit or the disc.24REMOTE CONTROLThe remote control does notfunction.•••••Aim at the remote control at the remote sensor.Operate within Approx. 15 feet or reduce the light in the room.Clear the path of the beam.The batteries are weak. Replace the batteries.Check the batteries are inserted correctly.2399–24342813ENGLISHFOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:1-800-289-0981WHEN CALLING CUSTOMER SERVICE – PLEASE HAVE YOUR MODEL NUMBER READYOR WRITE TO:ORION SALES, INC.3471 N. UNION DR.OLNEY, ILLINOIS 62450FOR INFORMATION ON OUR OTHER PRODUCTS, OR TO ORDER ACCESSORIES ONLINE, PLEASE VISIT OUR WEBSITE ATwww.orionsalesinc.com37
- Page 1 and 2: NEED MORE INFO ON THE DTV TRANSITIO
- Page 3: 1) Read these instructions.2) Keep
- Page 7 and 8: FeaturesLCD color TV With DVD/CD pl
- Page 9 and 10: DiscPlayable discsDVD VideoCD-DADis
- Page 11 and 12: Location of controls(continued)Rear
- Page 13 and 14: Remote controlInserting Batteries1O
- Page 15 and 16: Cable TV connectionsThis TV has an
- Page 17 and 18: DISPLAYPress DISPLAY to display the
- Page 19 and 20: Memorizing channelsThis TV is equip
- Page 21 and 22: To set the Parental Control1 Select
- Page 23 and 24: NOTE:• Selectable picture format
- Page 25 and 26: Operation statusFile list1/15 00:00
- Page 27 and 28: 4 Press ENTER.• Playback starts.
- Page 29 and 30: 3 Press ▲ or ▼ to select your d
- Page 31 and 32: Enter the appropriate code number f
- Page 33 and 34: Connections to other equipment(cont
- Page 35: Reception disturbancesMost types of
- Page 39: LIMITED WARRANTY26” LCD HDTV with
36Problems and troubleshoot<strong>in</strong>gUse the follow<strong>in</strong>g check list <strong>for</strong> troubleshoot<strong>in</strong>g when you have problems <strong>with</strong> your TV/<strong>DVD</strong>. Consult your localdealer or service outlet if problems persist.Be sure all connections are properly made when us<strong>in</strong>g <strong>with</strong> other units.POWERSYMPTOMS POSSIBLE SOLUTIONS PAGETV/<strong>DVD</strong> does not operate.TV BROADCAST RECEPTIONPoor sound or no sound.Poor picture or no picture.Poor reception on somechannels.Poor color or no color.Picture wobbles or drifts.No Cable TV reception.Horizontal or diagonal bars onscreen.No reception above channel 13.TV shuts off.Closed - Caption is not activated.Display is not shown <strong>in</strong> yourlanguage.PCThe image on the screen ismov<strong>in</strong>g <strong>in</strong> an oblique direction.The coarse vertical stripes canbe seen <strong>in</strong> full-display mode.Part of the image is miss<strong>in</strong>g.The horizontal stripes are mov<strong>in</strong>gvertically <strong>with</strong> flicker<strong>in</strong>g screen.When the characters aredisplayed on the whole screen,the vertical stripes appear andsome of the characters areblurred.••••••••••••••••••••••••••••••••Make sure the power cord is plugged <strong>in</strong>.Power is off, check fuse or circuit breaker.Unplug unit, then plug it back <strong>in</strong>.Station or Cable TV experienc<strong>in</strong>g problems, tune to another station.Check Volume adjustments or mut<strong>in</strong>g.Check <strong>for</strong> sources of possible <strong>in</strong>terference.Station or Cable TV experienc<strong>in</strong>g problems, tune to another station.Check antenna or Cable TV connections, reorient antenna.Check <strong>for</strong> sources of possible <strong>in</strong>terference.Check picture control adjustments.Station or Cable TV experienc<strong>in</strong>g problems, tune to another station.Station signal is weak, reorient antenna to receive stronger station.Check <strong>for</strong> sources of possible <strong>in</strong>terference.Station or Cable TV experienc<strong>in</strong>g problems, tune to another station.Make sure channels are set <strong>in</strong>to memory.Check picture control adjustments.Check antenna or Cable TV connections, reorient antenna.Check <strong>for</strong> sources of possible <strong>in</strong>terference.Station or Cable TV experienc<strong>in</strong>g problems, tune to another station.Make sure channels are set <strong>in</strong>to memory.Cable TV company is scrambl<strong>in</strong>g signal.Check antenna orientation.Check all Cable TV connections.Set Signal Type option to the “Cable” mode.Station or Cable TV system problems, try another station.Check antenna connections, reorient antenna.Check <strong>for</strong> sources of possible <strong>in</strong>terference.Make sure Signal Type option is <strong>in</strong> the appropriate mode.If us<strong>in</strong>g antenna, check UHF antenna connections.No broadcast on station tuned.Sleep Timer is set.Power <strong>in</strong>terrupted.TV station experienc<strong>in</strong>g problems or program tuned is not closed captioned. Tryanother channel.Check Cable TV connection or VHF/UHF antenna, reposition or rotate antenna.Set Closed caption <strong>in</strong> the menu.•••131616, 17351614, 15351816143516161814, 15351616–14151616143516141617–1614, 15• Select proper language <strong>in</strong> the menu options.18• Check “Clock” and “Phase”.18• Check “Clock”.18• Check “Auto Adjust”.18• Check the signal status of the PC.–••Check “Auto Adjust”.If the display condition is not improved <strong>with</strong> “Auto Adjust”, check “Clock”.• The <strong>LCD</strong> panel is a very high technology product, giv<strong>in</strong>g you f<strong>in</strong>e picture details. Occasionally, a few non-active pixels may appear onthe screen as a fixed po<strong>in</strong>t of blue, green or red. Please note that this does not affect the per<strong>for</strong>mance of your product.2218
Change language