LCD HDTV with Built-in DVD Player Operating Guide for L26D103
LCD HDTV with Built-in DVD Player Operating Guide for L26D103 LCD HDTV with Built-in DVD Player Operating Guide for L26D103
Convenience functionsYou can change the default settings to convenience use.Icon Selected Items Setup hintVideo PictureSettingBrightness/ Contrast /Sharpness / Color/ TintYou can adjust the picture quality to your preference.Color TemperatureBacklightBluish (Cool) / Neutral (Standard) / Reddish (Warm)The Backlight feature adjusts the screen brightness for improved picture clarity.Picture SportsBright and dynamic picture (factory-set)ModeStandardStandard picture quality (factory-set)MovieMovie-like picture setting (factory-set)CustomYour personal preferences (set by you; see “Picture Setting”)Aspect See page 22.Auto Movie On/OffModePC Setting H Position /V PositionClockPhaseAuto AdjustNoise On/OffReductionA smoother motion may be obtained by setting the Film Mode to “On” when you view aDVD.To adjust the horizontal / vertical position of the image on the PC Monitor screen. Eachvideo standard will require a different value for this setting.To minimize any vertical bars or stripes visible on the screen background.This must be adjusted after the frequency has been set optimize picture quality.To adjust the all PC settings automatically.Noise Reduction can reduce the roughness of the picture.Audio Bass / Treble / Balance You can adjust the sound quality to your preference.MTS Stereo / Mono /SAPThe multi-channel TV sound (MTS) feature provides high-fidelity stereo sound. MTSalso can transmit a second audio program (SAP) containing a second language or otheraudio information.When the TV receives a stereo or SAP broadcast, the word “Stereo” or “SAP” displayson-screen every time you press DISPLAY.Surround On/Off The dynamic presence and sound created offers a thoroughly enjoyable listeningexperience.Audio LanguageWhen two or more audio languages are included in a digital signal, you can select one ofthe audio language. (This function is available only for digital broadcast.)HDMI 1 HDMIWhen you connect the HDMI device to the TV, select this setting.AudioDVIWhen you connect the DVI device to the TV with analog audio cords, select this setting.Speakers On/Off Use this feature to turn the TV speakers off when you connect an audio system.Channel Channel Manager See page 19.Signal Meter See page 20.Auto Channel Scan See page 19.Channel Labels See page 20.Locks See page 20.Setup Closed Captions See page 22.Menu LanguageYou can choose from three different languages (English, Français (French) and Español(Spanish)) for the on-screen displays.Select the language you prefer first, then proceed with the other menu options.Video Label See page 20.Auto Shut *1OffResetOn/OffIf the Auto Shut Off feature is On, a station being viewed stops broadcasting and the TVis not operated, the TV will automatically shut itself off after 15 minutes.The Reset function returns your settings to the factory settings.“Aspect”, “MTS”, “Audio Language” and “HDMI1 Audio” cannot be reset by this function.NOTE:* If there is no input signal in the HDMI or PC mode, after 1 minute Auto Shut Off will be activated.18
Memorizing channelsThis TV is equipped with a channel memory feature whichallows channels to skip up or down to the next channelset into memory, skipping over unwanted channels. Beforeselecting channels, they must be programmed into the TV’smemory. To use this TV with an antenna, set the Signal Typeoption to the Air mode. When shipped from the factory, thismenu option is in the Cable mode.Air/Cable selection1 Select “Channel”, then press ▶ or ENTER.2 Press ▲ or ▼ to select “Auto Channel Scan”, then press ▶ orENTER.3 Press ▲ or ▼ to select “Source”.4 Press ◀ or ▶ to select “Air” or “Cable”.Air - VHF/UHF channelsCable - CABLE TV channelsAuto Channel ScanSourceScan: Move: AdjustCableStartNOTE:• It may take a few seconds for a digital channel picture to appearon screen after being selected.Automatic search1 Select “Channel”, then press ▶ or ENTER.2 Press ▲ or ▼ to select “Auto Channel Scan”, then press ▶ orENTER.3 Press ▲ or ▼ to select “Scan”, then press ▶ or ENTER.Auto Channel ScanSourceScanCableCancelAdding ChannelIf you find a new digital channel unregistered, you can add thenew channel into the channel memory.1 Tune in the new channel.2 Select “Channel”, then press ▶ or ENTER.3 Press ▲ or ▼ to select “Channel Manager”, then press ▶ orENTER.Channel ManagerAdd Digital Channel >>View/Skip >>Clear All >>: Move ENTER:Select4 Press ▲ or ▼ to select “Add Digital Channel”, then press ▶or ENTER. The new channel will be added into the channelmemory.Add/Delete channelYou can select the channel that you want to skip.1 Select “Channel”, then press ▶ or ENTER.2 Press ▲ or ▼ to select “Channel Manager”, then press ▶ orENTER.3 Press ▲ or ▼ to select “View/Skip”, then press ▶ or ENTER.4 Press ▲ or ▼ to select the channel that you want to skip.View/SkipCH Signal2 Analog Skip3 Analog View3-001 Digital View3-002 Digital View4 Analog View: Move: Adjust5 Press◀ or ▶to select “View” or “Skip”, whichever function youwant to perform.6 Repeat steps 4 - 5 for other channels you want to add ordelete.ENGLISHAnalog Channel Found : 7Digital Channel Found : 5Scanning: Move ENTER:Cancel4 The TV will begin memorizing all the channels available inyour area.• It may take from 15 minutes to 30 minutes to completememorizing digital cable channels.Depending on the reception condition, a bar display maynot advance for several minutes, please be patient.NOTE:• Memorizing channels is best accomplished during evening“PRIMETIME” hours, as more stations are broadcasting digitalsignals. Memorizing channels can only be accomplished whilea station is broadcasting a digital signal to set that channel intomemory.• If you are unsure of the digital channels available in your area,you may visit www.antennaweb.org to receive a list based on youraddress or zip code. Should you require further assistance youmay call our toll-free customer service line at 1-800-289-0981.• New digital channels may be added to your area periodically, itis recommended to perform the “Scan” procedure regularly.Clear AllAll channels are deleted from the channel memory.1 Select “Channel”, then press ▶ or ENTER.2 Press ▲ or ▼ to select “Channel Manager”, then press ▶ orENTER.3 Press ▲ or ▼ to select “Clear All”, then press ▶ or ENTER.Channel ManagerAdd Digital Channel >>View/Skip >>Clear All >>: Move ENTER:Select19
- Page 1 and 2: NEED MORE INFO ON THE DTV TRANSITIO
- Page 3: 1) Read these instructions.2) Keep
- Page 7 and 8: FeaturesLCD color TV With DVD/CD pl
- Page 9 and 10: DiscPlayable discsDVD VideoCD-DADis
- Page 11 and 12: Location of controls(continued)Rear
- Page 13 and 14: Remote controlInserting Batteries1O
- Page 15 and 16: Cable TV connectionsThis TV has an
- Page 17: DISPLAYPress DISPLAY to display the
- Page 21 and 22: To set the Parental Control1 Select
- Page 23 and 24: NOTE:• Selectable picture format
- Page 25 and 26: Operation statusFile list1/15 00:00
- Page 27 and 28: 4 Press ENTER.• Playback starts.
- Page 29 and 30: 3 Press ▲ or ▼ to select your d
- Page 31 and 32: Enter the appropriate code number f
- Page 33 and 34: Connections to other equipment(cont
- Page 35 and 36: Reception disturbancesMost types of
- Page 37 and 38: Problems and troubleshooting(contin
- Page 39: LIMITED WARRANTY26” LCD HDTV with
Memoriz<strong>in</strong>g channelsThis TV is equipped <strong>with</strong> a channel memory feature whichallows channels to skip up or down to the next channelset <strong>in</strong>to memory, skipp<strong>in</strong>g over unwanted channels. Be<strong>for</strong>eselect<strong>in</strong>g channels, they must be programmed <strong>in</strong>to the TV’smemory. To use this TV <strong>with</strong> an antenna, set the Signal Typeoption to the Air mode. When shipped from the factory, thismenu option is <strong>in</strong> the Cable mode.Air/Cable selection1 Select “Channel”, then press ▶ or ENTER.2 Press ▲ or ▼ to select “Auto Channel Scan”, then press ▶ orENTER.3 Press ▲ or ▼ to select “Source”.4 Press ◀ or ▶ to select “Air” or “Cable”.Air - VHF/UHF channelsCable - CABLE TV channelsAuto Channel ScanSourceScan: Move: AdjustCableStartNOTE:• It may take a few seconds <strong>for</strong> a digital channel picture to appearon screen after be<strong>in</strong>g selected.Automatic search1 Select “Channel”, then press ▶ or ENTER.2 Press ▲ or ▼ to select “Auto Channel Scan”, then press ▶ orENTER.3 Press ▲ or ▼ to select “Scan”, then press ▶ or ENTER.Auto Channel ScanSourceScanCableCancelAdd<strong>in</strong>g ChannelIf you f<strong>in</strong>d a new digital channel unregistered, you can add thenew channel <strong>in</strong>to the channel memory.1 Tune <strong>in</strong> the new channel.2 Select “Channel”, then press ▶ or ENTER.3 Press ▲ or ▼ to select “Channel Manager”, then press ▶ orENTER.Channel ManagerAdd Digital Channel >>View/Skip >>Clear All >>: Move ENTER:Select4 Press ▲ or ▼ to select “Add Digital Channel”, then press ▶or ENTER. The new channel will be added <strong>in</strong>to the channelmemory.Add/Delete channelYou can select the channel that you want to skip.1 Select “Channel”, then press ▶ or ENTER.2 Press ▲ or ▼ to select “Channel Manager”, then press ▶ orENTER.3 Press ▲ or ▼ to select “View/Skip”, then press ▶ or ENTER.4 Press ▲ or ▼ to select the channel that you want to skip.View/SkipCH Signal2 Analog Skip3 Analog View3-001 Digital View3-002 Digital View4 Analog View: Move: Adjust5 Press◀ or ▶to select “View” or “Skip”, whichever function youwant to per<strong>for</strong>m.6 Repeat steps 4 - 5 <strong>for</strong> other channels you want to add ordelete.ENGLISHAnalog Channel Found : 7Digital Channel Found : 5Scann<strong>in</strong>g: Move ENTER:Cancel4 The TV will beg<strong>in</strong> memoriz<strong>in</strong>g all the channels available <strong>in</strong>your area.• It may take from 15 m<strong>in</strong>utes to 30 m<strong>in</strong>utes to completememoriz<strong>in</strong>g digital cable channels.Depend<strong>in</strong>g on the reception condition, a bar display maynot advance <strong>for</strong> several m<strong>in</strong>utes, please be patient.NOTE:• Memoriz<strong>in</strong>g channels is best accomplished dur<strong>in</strong>g even<strong>in</strong>g“PRIMETIME” hours, as more stations are broadcast<strong>in</strong>g digitalsignals. Memoriz<strong>in</strong>g channels can only be accomplished whilea station is broadcast<strong>in</strong>g a digital signal to set that channel <strong>in</strong>tomemory.• If you are unsure of the digital channels available <strong>in</strong> your area,you may visit www.antennaweb.org to receive a list based on youraddress or zip code. Should you require further assistance youmay call our toll-free customer service l<strong>in</strong>e at 1-800-289-0981.• New digital channels may be added to your area periodically, itis recommended to per<strong>for</strong>m the “Scan” procedure regularly.Clear AllAll channels are deleted from the channel memory.1 Select “Channel”, then press ▶ or ENTER.2 Press ▲ or ▼ to select “Channel Manager”, then press ▶ orENTER.3 Press ▲ or ▼ to select “Clear All”, then press ▶ or ENTER.Channel ManagerAdd Digital Channel >>View/Skip >>Clear All >>: Move ENTER:Select19
Change language