10.07.2015 Views

LCD HDTV with Built-in DVD Player Operating Guide for L26D103

LCD HDTV with Built-in DVD Player Operating Guide for L26D103

LCD HDTV with Built-in DVD Player Operating Guide for L26D103

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Remote controlInsert<strong>in</strong>g Batteries1Open the battery compartment cover <strong>in</strong>the direction of the arrow.2 Install two “AAA” batteries, pay<strong>in</strong>gattention to the polarity diagram <strong>in</strong> thebattery compartment.(cont<strong>in</strong>ued)3 Replace the compartment cover.Operation• Aim the remote control at the remote sensor and press control buttons to operate.• Operate the remote control <strong>with</strong><strong>in</strong> a 30° angle on either side of the remote sensor, up to adistance of approximately 15 feet.Approximately 15 feetENGLISHNOTE:••••••Do not leave the remote control unit exposed to direct sunlight or <strong>in</strong> hot or humid places.The remote control unit uses <strong>in</strong>frared beams to transmit signals, so sunlight or fluorescent light on the remote sensor may shortenoperat<strong>in</strong>g distance.Incorrect use of batteries may cause them to leak or burst. Read the battery warn<strong>in</strong>gs and use the batteries properly.Do not mix old and new batteries.Remove batteries if the remote control will not be operated <strong>for</strong> an extended period of time.Please use caution when <strong>in</strong>sert<strong>in</strong>g batteries to avoid battery damage. If the spr<strong>in</strong>g term<strong>in</strong>al <strong>in</strong> the remote control rema<strong>in</strong>s <strong>in</strong> contact<strong>with</strong> a side of a damaged battery if can cause a short circuit. Never use damaged batteries as they can become very hot and aredangerous.TO USE AC POWER1. Connect the AC cord plug <strong>in</strong>to this unit’s AC IN jack.2. Connect the AC cord <strong>in</strong>to an AC outlet.Power sourceWider Holeand BladeAC OutletAC cord (supplied)AC 120V, 60HzNOTE:• Please make sure to <strong>in</strong>sert the cord securely at both the <strong>LCD</strong> TV/<strong>DVD</strong> and the wall outlet.• The AC Cord has a ground<strong>in</strong>g-type AC l<strong>in</strong>e plug. If the supplied AC cord does not match your AC outlet, contact a qualified electrician,do not defeat the purpose of a ground<strong>in</strong>g plug.WARNING:• DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC CORD. THIS COULDCAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.• DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE DISPLAYED. THIS COULD CAUSE FIRE, ELECTRICALSHOCK, OR DAMAGE.CAUTION:• WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF SAFETY, BE SURE TOUNPLUG IT FROM THE AC OUTLET.• DO NOT PLUG/UNPLUG THE PLUG WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL SHOCK.• IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED ONE IS RECOMMENDED. CONTACTTHE DEALER THAT YOU PURCHASED THE UNIT FROM.13

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!