Eco Thermal Recess Fitting Instructions - Merit Blinds

Eco Thermal Recess Fitting Instructions - Merit Blinds Eco Thermal Recess Fitting Instructions - Merit Blinds

meritblinds.co.uk
from meritblinds.co.uk More from this publisher
10.07.2015 Views

EcoBlindsRecess Fitting__ I_TUTTo allow your Eco blindto be fitted in the recess,a three-piece batonframe is supplied.f"TMeasure and mark thedesired distance 'X' forthe blind to fit into therecess for each piece ofthe frameMountFrameEThis fits into the windowas shownThen mount each sectionusing the pins suppliedand a hammer0 Remove tapefrom guidedogsMount cassette onto guide dogsand check level. This is done bylowering the blind to see if runningoff the square. If so, adjust using.0>EL guide dogs as shown in nextFit theBracketsLOLocate guide dog flush to the headof the wall and the recess at thedesired location. Push into positionthen hammer the masonry pins intoposition on each side0 Adjust blocks up and down for leveling if requiredRemount cassetteonto guide dogs asper step B3.Not Level(Off-Square)InstallCassette6mm6mm of adjustment is available on both sidesA: Remove block - B: Adjust block - C: Replace blockRepeat if requiredto level ---->Then fix cassette onto guide dogsusing screws provided (Leff and Right)Level r(Square)

<strong>Eco</strong><strong>Blinds</strong><strong>Recess</strong> <strong>Fitting</strong>__ I_TUTTo allow your <strong>Eco</strong> blindto be fitted in the recess,a three-piece batonframe is supplied.f"TMeasure and mark thedesired distance 'X' forthe blind to fit into therecess for each piece ofthe frameMountFrameEThis fits into the windowas shownThen mount each sectionusing the pins suppliedand a hammer0 Remove tapefrom guidedogsMount cassette onto guide dogsand check level. This is done bylowering the blind to see if runningoff the square. If so, adjust using.0>EL guide dogs as shown in nextFit theBracketsLOLocate guide dog flush to the headof the wall and the recess at thedesired location. Push into positionthen hammer the masonry pins intoposition on each side0 Adjust blocks up and down for leveling if requiredRemount cassetteonto guide dogs asper step B3.Not Level(Off-Square)InstallCassette6mm6mm of adjustment is available on both sidesA: Remove block - B: Adjust block - C: Replace blockRepeat if requiredto level ---->Then fix cassette onto guide dogsusing screws provided (Leff and Right)Level r(Square)


CentraliseHandleEnsure handle is central on the fabric by making sure distance 'X' isequal on both sides. To adjust, slide the handle to the left or right.To install the side rails, slide thefabric and handle into the slotOn the first side railPush the side rail up to thecassette and slide it justunder the front faceIInstall SideRailIt will now bepossible topivot the siderail into placealong thewall edge(1) The side rail feet havea slotted hole, to allowadjustability in theDirection indicatedInstallSiderails(2)Rails x 2(2) Once you are happywith the position of theside rail, fix it in placewith one screw intothe windowsill(3) Repeat the steps insections F and G forthe other side railHow to Operate(1) To operate the blind, push thehandle in; it will rotate awayfrom the side rails and 'unlock'(2) This will allow you toslide the blind up or downto the desired position(3) Once the blind is in thedesired position, release thehandle and the blind will 'lock'

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!