EUROPASS CERTIFICATE-SUPPLEMENT

EUROPASS CERTIFICATE-SUPPLEMENTMagyarország1. TITLE OF THE CERTIFICATE (HU)31 522 01 1000 00 00 Elektromos gép- és készülékszerelő2. TRANSLATED TITLE OF THE CERTIFICATE (EN)Electrical machine and equipment mechanic(THIS TRANSLATION HAS NO LEGAL STATUS)3. PROFILE OF SKILLS AND COMPETENCESA typical holder of the certificate is able to:- Use electric measuring instruments and perform measurements;- Perform measurements of electric quantities in DC, one and three-phase systems;- Perform measurements of non-electric quantities;- Perform specialised electric measurements;- Operate, repair, fit and set ready electric machines, transformers;- Operate and repair asynchronous, synchronous and DC machines;- Use and operate special machines.4. RANGE OF OCCUPATIONS ACCESSIBLE TO THE HOLDER OF THE CERTIFICATE7445 Electric fitter(*) Explanatory notes:This document is designed to provide additional information about the specified certificate and does not serve as a legal certificate of vocationalqualification. The format of the description is based on the following documents:Council Resolution 93/C 49/01 of 3 December 1992 on the transparency of qualifications; Council Resolution 96/C 224/04 of 15 July 1996 on thetransparency of vocational training certificates, and Recommendation 2001/613/EC of the European Parliament and of the Council of 10 July 2001 onmobility within the Community for students, persons undergoing training, volunteers, teachers and trainers.More information on transparency is available at: http://europass.cedefop.europa.eu/©European Communities 2002©Serial number: E1

5. OFFICIAL BASIS OF THE CERTIFICATEName and status of the institute issuing the certificate: Name and status of the national/regional authority providingaccreditation/recognition of the certificateIn the case of vocational qualifications belonging to the competence of the Ministryof Social Affairs and Labour (SZMM), a vocational qualification-relatedindependent professional committee commissioned by the SZMMLevel of the certificate (national or international)Level of vocational qualification according to the NationalQualification Register:31 Intermediate vocational qualification entitling the holder tofill positions requiring physical work, which is based on theinput theoretical and practical knowledge elementsdetermined in the vocational and examination requirements(hereinafter: input competence) or on the basic schoolqualification certified with the completion of the eighthgrade.ISCED97 code:3CVCertificate number: PT KSerial number: 123456Grading scale / Pass requirementsThe average of the percentage of the performance achieved per examination part,taking into consideration the vocational and examination requirements, expressed asa grade:81-100% excellent (5)71-80% good (4)61-70% satisfactory (3)51-60% pass (2)0-50% fail (1)The code and name of the vocational requirement module, and the resultachieved in the examination part associated with the requirement moduleexpressed in %:0900-06 Carrying out basic tasks related to information technology,100%workflow management and planning, and technology1396-06 Use of measuring instruments, perform measurements 100%1397-06 Setting electric machines 100%1398-06 Fit, repair and operate electric machines 100%1399-06 Safeguard and operate electric devices 100%Certificate issue date:2012.09.14Access to next level of education/trainingTo secondary educationThe performance of the examinee achieved at thevocational examination expressed in %The performance of the examinee achieved at thevocational examination expressed as a grade:International agreements100%5Other information concerning the vocational training process (accession number of the accredited programme)Legal basisAct LXXVI of 1993 on Vocational Training,Regulation no. 21/2007. (V. 21.) SZMM.Serial number: E1

6. OFFICIALLY RECOGNISED WAYS OF ACQUIRING THE CERTIFICATEDescription of vocational education and trainingreceivedPercentage of total programme%School-/training centre-based Theory: 40 % Practice: 60 %Duration(hours/weeks/months/years)Workplace-basedAccredited prior learningTotal duration of the education/training leading to the certificate2000 hoursEntry requirements:The course can be undertaken in possession of the competences defined for the mechanical engineering vocational group;OrElementary level qualification certified by the completion of the eighth grade;Vocational aptitude requirements;Medical fitness examination.This certificate supplement was prepared on the basis of the instruction for filling in the Certificate Supplement published on thehomepages of the National Reference and Coordination Point and the National Europass Centre.National Labour Office - National Reference and Coordination Point: http://nrk.nive.huHead of Examination Organiser:SEALIssue date: 2012.09.14Serial number: E1