pic24fj128ga010 family - Microchip

PIC24FJ128GA010 FAMILY2.0V (3)2.0V (3)TABLE 26-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)DC CHARACTERISTICSStandard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)Operating temperature -40°C ≤ TA ≤ +85°C for IndustrialParameterNo.Typical (1) Max Units ConditionsPower-Down Current (IPD) (2)DC60 3 25 μA -40°CDC60a 3 45 μA +25°CDC60b 100 600 μA +85°CDC60f 20 40 μA -40°CBase Power-Down Current (5)DC60g 27 60 μA +25°C 3.6V (4)DC60h 120 600 μA +85°CModule Differential CurrentDC61 10 25 μA -40°CDC61a 10 25 μA +25°CDC61b 10 25 μA +85°CDC61f 10 25 μA -40°CWatchdog Timer Current: ΔIWDT (5)DC61g 10 25 μA +25°C 3.6V (4)DC61h 10 25 μA +85°CDC62 8 15 μA -40°CDC62a 8 15 μA +25°C 2.0V (3)DC62b 8 15 μA +85°CRTCC + Timer1 w/32 kHz Crystal:DC62f 8 15 μA -40°CΔIRTCC (5)DC62g 8 15 μA +25°C 3.6V (4)DC62h 8 15 μA +85°CNote 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidanceonly and are not tested.2: Base IPD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs andpulled high. WDT, etc., are all switched off. Unused PMD bits are set. VREGS bit is clear.3: On-chip voltage regulator disabled (ENVREG tied to VSS).4: On-chip voltage regulator enabled (ENVREG tied to VDD).5: The Δ current is the additional current consumed when the module is enabled. This current should beadded to the base IPD current.© 2009 Microchip Technology Inc. DS39747E-page 215