pic24fj128ga010 family - Microchip
pic24fj128ga010 family - Microchip
pic24fj128ga010 family - Microchip
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PIC24FJ128GA010 FAMILY26.0 ELECTRICAL CHARACTERISTICSThis section provides an overview of the PIC24FJ128GA010 electrical characteristics. Additional information will beprovided in future revisions of this document as it becomes available.Absolute maximum ratings for the PIC24FJ128GA010 are listed below. Exposure to these maximum rating conditionsfor extended periods may affect device reliability. Functional operation of the device at these, or any other conditionsabove the parameters indicated in the operation listings of this specification, is not implied.Absolute Maximum Ratings (†)Ambient temperature under bias...............................................................................................................-40°C to +85°CStorage temperature .............................................................................................................................. -65°C to +150°CVoltage on VDD with respect to VSS ......................................................................................................... -0.3V to +4.0VVoltage on any combined analog and digital pin and MCLR, with respect to VSS ......................... -0.3V to (VDD + 0.3V)Voltage on any digital-only pin with respect to VSS .................................................................................. -0.3V to +6.0VVoltage on VDDCORE with respect to VSS ................................................................................................. -0.3V to +2.8VMaximum current out of VSS pin ...........................................................................................................................300 mAMaximum current into VDD pin (Note 1)................................................................................................................250 mAMaximum output current sunk by any I/O pin..........................................................................................................25 mAMaximum output current sunk by any I/O pin..........................................................................................................25 mAMaximum output current sourced by any I/O pin ....................................................................................................25 mAMaximum current sunk by all ports .......................................................................................................................200 mAMaximum current sourced by all ports (Note 1)....................................................................................................200 mANote 1: Maximum allowable current is a function of device maximum power dissipation (see Table 26-2).FIGURE 26-1:FREQUENCY/VOLTAGE GRAPH3.00V2.75V2.50V2.75VVoltage VDDCORE (1)2.25V2.00V16 MHzFrequency32 MHzNote 1: When the voltage regulator is disabled, VDD and VDDCORE must be maintained so that VDDCORE ≤ VDD ≤ 3.6V.†NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to thedevice. This is a stress rating only and functional operation of the device at those or any other conditions above thoseindicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions forextended periods may affect device reliability.© 2009 <strong>Microchip</strong> Technology Inc. DS39747E-page 211