Caddy Clips - RS Dale

ROOFTOP SUPPORTThe Standard Pipe Pier TMAn engineered solution fortypical roof applications.New Heavy Duty Pipe PierFor Applications with Larger LoadsEliminates the need to weld to building andstructural steel, while protecting the roof orfloor surfaces.New Plenum Pier TMFor Air Handling Space InstallationsDesigned to support cable and pipe in air handling spaces.(Tested and meets UL 2043 requirements).The Pipe Pier polyethylenesupports are lightweight.A package of ten can beeasily carried up a ladder.NOTE: Plenum Pier is for indoor applications only.Pipe Pier Frequently Asked QuestionsHow long will Pipe Pier last?Pipe Pier supports are UV resistant and the closed cellproperties of ETHAFOAM TM prevent it from absorbingwater. Based on years of testing in various climateextremes, it will outperform other methods andmaterials (i.e. lumber, Styrofoam TM , etc).Should Pipe Pier supports be adhered to the roof surface?Pipe Pier products are designed to be placed on the surface and allow forslight movement caused by the inevitable expansion and contraction of thepipe. If adhesion is desired or specified, commercially available constructionadhesives can be used to secure them to the roof. (Mastic will not negativelyaffect Pipe Pier.) However, the hardware used to attach pipe to the integralstrut channel or the design of the piping system itself (i.e. expansion joints)must allow for movement of the system.Part Description Dimensions Load Cap. Qty per Weight Fig.Number cm kg Bundle each/kg182400 CADDY ® PP50H4 (PG) 26.5 x 10 x 10 22 10 0.544 1182410 CADDY PP50H6 (PG) 26.5 x 10 x 15 22 10 0.680 1182420 CADDY PP150H4 (PG) 30.4 x 30.4 x 10 68 3 1.769 2182430 CADDY PP300H4 (PG) 55 x 30 x 10 136 3 4.082 2182440 CADDY PP50H2AH (CG) 26.5 x 10 x 5 22 10 0.408 3(PG)=pre-galv. (CG)=yellow dichromateHWFigure 1StandardLFigure 2Heavy DutyFigure 3PlenumPipe Pier complies with:Uniform Mechanical Code ('97) 1312.2 for gas pipingUniform Mechanical Code ('97) 1201.1.6.2 for hydronic pipingPipe Pier and Plenum Pier are trademarks of Pipe Pier, Inc.ETHAFOAM brand and STYROFOAM are trademarks of Dow Chemical Company.Specifications for Pipe Pier Roof SupportsPiping on roof surfaces shall be supported by a polyethylene foam block withan integral strut channel for receiving standard strut clamps and accessories.Pipe Pier shall be installed according to manufacturer’s recommendations.Roof pipe supports shall be spaced according to industry standards and shallbe installed to allow for expansion and contraction.A complete downloadable MasterSpecformat document is on the ERICO ® website.6www.erico.com