Caddy Clips - RS Dale

➣ 14.4 LOAD RATINGCADDY ® fixing products from ERICO ® are designedwith two load limits:5a. Static Load in NEWTONStatic load limit values specify maximum allowableinstalled loads for user application.5b. Ultimate Static Load in NEWTONIf this rating is exceeded, failure of the fixing productmay occur.Load ratings are only valid within +5 to + 35°C unlessotherwise specified in this catalogue.All loads should be applied VERTICALLY to the normalfixing product installation except as may be indicatedotherwise in diagrams. If no direction is indicated or azero load rating is given, the product is to be used forpositioning purposes only.A load rating in this catalogue is only applicable if theload-bearing capacity of the supporting element (purlin,angle beam, flange, bar, etc.) is adequate.Any repositioning, deformation, or cracking of thesupporting element should be a warning that the loadbearing capacity of the element is exceeded.In such situations, take preventive measures: consulta structural engineer, or consult ERICO ® for advice.NOTE:ERICO will be pleased to advise on special applicationsor loading situations.1kg = 10N180www.erico.com