Sekonic L-608 Manual

4. Basic Operation< Lumigrid > (optional) (Receiving Angle 54°)1. Remove the LumisphereThe lumisphere unit is removed by holding both theupper and lower sections of Lumisphere retractingring q and turning it counterclockwise while pushingthe Lock lever downward.2. Mount the lumigridTo mount Lumigrid, align the mount/removal indicatoron the Lumigrid with the mark and then clockwisedirection to secure it in place.3. Take measurements by aiming the lumigrid precisely at the area of the subject to be measuredfrom the position or direction of the camera.4. Follow the same procedure to mount the lumisphere.CAUTION:• Be sure to avoid touching the light receiving sensor when mounting or removing the lumisphereor lumigrid. In case of touching it, clean with soft dry cloth.-12-