Sekonic L-608 Manual

3. Before Using8. Mode and Setting Lock or Lock Off1. Hold down the Mode set button !0 and ISO1 button !1and "LOC" will appear to indicate that the Settings arelocked. The last measurement is held until the lock isreleased, even if the Jog wheel t is accidentallymoved.However, if the measurement button !5 is pressed, anew measurement is displayed with the same lockedsettings.ISO 1MODE2. To release the Measurement lock, perform the sameoperation for the Measurement lock, Hold down theMode set button and ISO1 button and "Off" will appearto indicate that the Measurement lock is released.ISO 1MODEReference:• If power to the meter is turned off or auto off is activated when in the locked position, the diallock function will continue operating when the meter is turned on again.-6-