TECHNICAL DATA SHEET - VPS Lubricants
TECHNICAL DATA SHEET - VPS Lubricants TECHNICAL DATA SHEET - VPS Lubricants
TECHNICAL DATA SHEETVPS International BVOude Wehlseweg 197007 GE DoetinchemThe NetherlandsPhone: +31 (0)314 341 756Fax: +31 (0)314 342 820CoC Arnhem: 90.82.827VAT Nr.: NL8030.08.090.B01TypeALPHEUS VR‐3Alpheus VR3 a premium two‐stroke cycle engine oil for use in water‐cooled outboard motors(both large and small power outputs), used at all fuel to oil ratios specified by the OriginalEquipment Manufacturers (OEM’s). It is also suitable for motorcycle and snowmobileengines, where the manufacturer calls for a NMMA TC‐W3 approved oil. It is especiallyformulated for oil injected engines. It also meets the SAE Fluidity/Miscibility (F/M) Grade 3.Alpheus VR‐3 has been approved by the National Marine Manufacturers Association(NMMA) against their TC‐W3 specification. Its formulation also meets the warrantyrequirements of the following engine manufacturers: Johnson, Evinrude, Mercury Marine &Chrysler. Outboard Motor Oil has the following features:- Ashless formula minimises pre‐ignition.- Resists rust and corrosion.- Contains a quick‐mix additive.- Reduces engine wear and varnish build‐up.- Suitable for oil injection (to –40°C) as well as pre‐mixed fuel/oil lubricated engines.- Reduces smoke emissions.Typical Characteristics:Outboard Motor OilCode 4007Viscosity cSt @ 40°C 59cSt @ 100°C 9.2SUV @ 100°F 265SUV @ 210°F 57Viscosity Index 138Flash Point, °C / °F 151/304Pour Point, °C / °F ‐51/‐60Brookfield Viscosity, cP @ °C 5,900@ ‐25Sulphated Ash, % Wt
<strong>TECHNICAL</strong> <strong>DATA</strong> <strong>SHEET</strong><strong>VPS</strong> International BVOude Wehlseweg 197007 GE DoetinchemThe NetherlandsPhone: +31 (0)314 341 756Fax: +31 (0)314 342 820CoC Arnhem: 90.82.827VAT Nr.: NL8030.08.090.B01TypeALPHEUS VR‐3Alpheus VR3 a premium two‐stroke cycle engine oil for use in water‐cooled outboard motors(both large and small power outputs), used at all fuel to oil ratios specified by the OriginalEquipment Manufacturers (OEM’s). It is also suitable for motorcycle and snowmobileengines, where the manufacturer calls for a NMMA TC‐W3 approved oil. It is especiallyformulated for oil injected engines. It also meets the SAE Fluidity/Miscibility (F/M) Grade 3.Alpheus VR‐3 has been approved by the National Marine Manufacturers Association(NMMA) against their TC‐W3 specification. Its formulation also meets the warrantyrequirements of the following engine manufacturers: Johnson, Evinrude, Mercury Marine &Chrysler. Outboard Motor Oil has the following features:- Ashless formula minimises pre‐ignition.- Resists rust and corrosion.- Contains a quick‐mix additive.- Reduces engine wear and varnish build‐up.- Suitable for oil injection (to –40°C) as well as pre‐mixed fuel/oil lubricated engines.- Reduces smoke emissions.Typical Characteristics:Outboard Motor OilCode 4007Viscosity cSt @ 40°C 59cSt @ 100°C 9.2SUV @ 100°F 265SUV @ 210°F 57Viscosity Index 138Flash Point, °C / °F 151/304Pour Point, °C / °F ‐51/‐60Brookfield Viscosity, cP @ °C 5,900@ ‐25Sulphated Ash, % Wt
<strong>TECHNICAL</strong> <strong>DATA</strong> <strong>SHEET</strong><strong>VPS</strong> International BVOude Wehlseweg 197007 GE DoetinchemThe NetherlandsPhone: +31 (0)314 341 756Fax: +31 (0)314 342 820CoC Arnhem: 90.82.827VAT Nr.: NL8030.08.090.B01Gasoline to OilQUICK MIX CHARTMillilitres (mL) Oil Added toRatio Litres of Gasoline5 Litres 10 Litres 25 Litres16:1 315 625 155024:1 210 420 105032:1 165 315 80050:1 100 200 500100:1 50 100 250Note: given typicals may vary in a normally accepted rangewww.vps‐international.nla ISO‐9001 Certified Company
Change language